Polybird P10-R Dining Side Chair Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P10-R Dining Side Chair
TOOLS
HARDWARE
PARTS
INSTALLATION INSTRUCTION
Note before starting: wait until the whole piece is assembled to tighten the bolts completely.
-
Attach front legs C & D to seat B using two 1/4” x 1” wafer bolts (AA) per leg, as shown.
The chair assembly should look like this. -
Attach seat back A to chair assembly from step 1. Using four 1/4” x 11/2” wafer bolts (BB), secure seat back A to seat B, as shown.
-
Attach cross-braces E & F by fitting in notches in legs C & D. Use four 1/4” x 11/2” wafer bolts (BB) to secure cross braces.
-
Attach brace G to cross braces using two 2 1/2” screws (CC) on each side.
We hope you enjoy your new piece of furniture for years to come!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>