Roinvou B0CTY558N7 2 Plus 64G Android 13 Car Play Stereo Installation Guide
- June 1, 2024
- Roinvou
Table of Contents
Roinvou B0CTY558N7 2 Plus 64G Android 13 Car Play Stereo
Product Information
Specifications
- Product: Central Control for Ford Focus 2012-2018 / C7280
- Tools Required for Disassembly: Wires, Mounting bracket, Protocol box, Installation tools
Product Usage Instructions
Disassembly:
- Unscrew the two screws beneath the air conditioning control panel, then pry it open and remove it. Disconnect the air conditioning control panel from the original vehicle wiring.
- Loosen the screws on both sides of the main unit, remove the main unit, and then disconnect it from the original vehicle wiring.
- Remove the four screws on both sides of the air conditioning display screen, then disconnect the connected wires and pull out the air conditioning display screen.
- Remove the air conditioning vents on both sides of the original vehicle frame.
Installation:
- Install the decorative panel beneath the new radio frame, then secure it with four screws on both sides.
- Install the two air conditioning vents from the original vehicle onto the new radio frame, and securely fasten them with the clips.
- Connect the wiring of the new radio to the original vehicle’s wiring and plug in the interface box. Install the new radio into the original vehicle, and finally tighten the two screws beneath the control panel. The installation of the new radio is complete.
FAQ
-
Q: What should I do if the wiring harness does not match during installation?
A: If the wiring harness does not match, please contact customer service to request the correct wiring harness. -
Q: What if I encounter problems during installation?
A: Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact us at [email protected] and we will respond to you within 24 hours. We will do our best to solve the problem for you until you are satisfied. -
Q: What are the FCC warnings related to this product?
A: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
For Ford Focus 2012-2018 / C7280
Central Control Disassembly and Operation Post-installation rendering
TOOLS REQUIRED FOR DISASSEMBLY
- Wires
- Mounting bracket
- Protocol box
- Installation tools
Disassembly
- Unscrew the two screws beneath theair conditioning control panel, then pry it open and remove it. Disconnect the air conditioning control panel from the original vehicle wiring.
- Loosen the screws on both sides of the main unit, remove the main unit, and then disconnect it from the original vehicle wiring.
- Remove the four screws on both sides of the air conditioning display screen, then disconnect the connected wires and pull out the air conditioning display screen.
- Remove the air conditioning vents on both sides of the original vehicle frame.
PROPOSE
Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car’s power is cut off during the installation.
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
- Install the decorative panel beneath the new radio frame, then secure it with four screws on both sides.
- Install the two air conditioning vents from the original vehicle onto the new radio frame, and securely fasten them with the clips.
- Connect the wiring of the new radio to the original vehicle’s wiring and plug in the interface box. Install the new radio into the original vehicle, and finally tighten the two screws beneath the control panel. The installation of the new radio is complete.
COMPARATION
Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some
problems during installation. If you still have any questions about the
installation after reading this manual, you can contact us and we will respond
to you within 24 hours. Don’t worry; we will do our best to solve the problem
for you until you are satisfied.
After-sales email: [email protected]
WARN FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation