Roinvou B0CLFZ62SN Android CarPlay Stereo Instruction Manual
- June 17, 2024
- Roinvou
Table of Contents
Roinvou B0CLFZ62SN Android CarPlay Stereo
Product Information
Specifications:
- Product: Central Control for Toyota Corolla 2009-2013 (C7278)
- Tools Required for Disassembly: Wire, Installation tools
Product Usage Instructions
Disassembly:
- Use a pry bar to remove the decorative side trims of the air conditioning control panel.
- Unscrew the screws on both sides of the seatbelt warning panel.
- Pry open the storage compartment, remove the seatbelt warning panel, and disconnect the wires within it.
- Pry open the decorative side trims on both sides of the radio.
- Remove the air conditioning control panel and the outer frame of the radio along with the air conditioning vents.
- Unscrew the four screws on both sides of the original radio, remove it, and unplug the wires connected to the original vehicle.
Installation:
- Connect the wires from the original vehicle to the new radio.
- Install the radio and the new frame into the designated position.
- Reattach the air conditioning vents and the air conditioning control panel to their original positions.
- Connect the wires from the seatbelt warning panel to the original vehicle.
- Reinstall it into the car and place the storage compartment back into its corresponding position.
- Tighten the screws on both sides of the seatbelt warning panel.
- Reinstall the decorative side trims on both sides of the radio and the air conditioning control panel back into the original positions in the car.
FAQ:
-
Q: What should I do if the wiring harness does not match during installation?
A: Please contact customer service to request the correct wiring harness for your installation. -
Q: What if I encounter problems during installation?
A: If you encounter any issues during installation, please contact us. We will respond to you within 24 hours to assist you with any problems you may have. -
Q: How can I reach customer service for assistance?
A: For after-sales support, please email us at [email protected] and we will do our best to help you with any concerns you may have.
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
certain conditions to prevent interference. Please refer to the manual for
more information.
For Toyota Corolla 2009-2013 / C7278
Central Control Disassembly and Operation Post-installation rendering
TOOLS REQUIRED FOR DISASSEMBLY
- Wire
- Installation tools
Disassembly
- Use a pry bar to remove the decorative side trims of the air conditioning control panel, then unscrew the screws on both sides of the seatbelt warning panel. Pry open the storage compartment, remove the seatbelt warning panel, and disconnect the wires within it.
- Pry open the decorative side trims on both sides of the radio, remove the air conditioning control panel, and then take out the outer frame of the radio along with the air conditioning vents.
- Unscrew the four screws on both sides of the original radio, remove the radio, and unplug the wires connected to the original vehicle.
PROPOSE
- Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car’s power is cut off during the installation.
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
- Connect the wires from the original vehicle to the new radio, then install the radio and the new frame into the designated position. Reattach the air conditioning vents and the air conditioning control panel to their original positions.
- Connect the wires from the seatbelt warning panel to the original vehicle, reinstall it into the car, and place the storage compartment back into its corresponding position. Finally, tighten the screws on both sides of the seatbelt warning panel.
- Reinstall the decorative side trims on both sides of the radio and the air conditioning control panel back into the original positions in the car. The installation of the new radio is now complete.
COMPARISON
Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact us and we will respond to you within 24 hours. Don’t worry; we will do our best to solve the problem for you until you are satisfied. After-sales email:[email protected]
WARN FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation