Roinvou C7167 Toyota Sequoia Owner’s Manual
- June 17, 2024
- Roinvou
Table of Contents
Roinvou C7167 Toyota Sequoia
TOOLS REQUIRED FOR DISASSEMBLY
- Wire
- Canbus
- Installation tools
Disassembly
-
Unscrew the gear shift handle, use a pry bar to pry open the water cup holder and take it out
-
Open the cigarette lighter frame with a pry bar, then use it to disconnect and remove the cigarette lighter wire, finally use a screwdriver to loosen the screws securing the gearshift base.
-
Use a pry bar to open the gearshift base, unplug the connecting wires, proceed to pry open the left-side air vent, and then pry open and remove the air conditioning control panel.
-
Loosen the screws on both sides of the radio with a screwdriver, remove the radio, and unplug the connecting wires.
PROPOSE
Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car’s power is cut off during the installation.
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
-
Connect the new car stereo wiring harness to the original vehicle wiring harness, ensuring a proper insertion into the respective interfaces.
-
Securely reinstall the air conditioning control panel into the original vehicle, install the new car stereo on the center console, and then sequentially reattach the left-side air vent, cigarette lighter, gearshift base, and cup holder to their original positions.
COMPARATION
Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some
problems during installation.
If you still have any questions about the installation after reading this
manual, you can contact us and we will respond to you within 24 hours. Don’t
worry; we will do our best to solve the problem for you until you are
satisfied.
After-sales email:cheyang728@gmail.com
WARN FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
