Roinvou B0CJLTDXGC 2 Plus 32G Android Car Play Stereo Instruction Manual
- June 1, 2024
- Roinvou
Table of Contents
Roinvou B0CJLTDXGC 2 Plus 32G Android Car Play Stereo
Specifications
- Product: Toyota RAV4 2013-2019 / C7271 Central Control
- Tools Required for Disassembly: Wires, Install bracket, Installation tools
- Compliance: FCC Part 15
Product Usage Instructions
Disassembly:
- Use a pry bar to open the original vehicle frame on the outer side of the time display screen, then remove the time display screen.
- Loosen the two screws above the fixed air conditioning vent using a screwdriver, then remove the air conditioning vents on both sides.
- Unscrew the two screws on both sides of the fixed radio, then remove the radio and disconnect the wiring.
Installation:
Note: If the wiring harness does not match, please contact customer service for the correct wiring harness.
- Pry open the buckle and remove the two air conditioning vents separately from the original vehicle frame. Align the buckle and install the two air conditioning vents onto the new radio frame, then plug the new radio into the original vehicle wiring.
- Install the new radio and secure the buckle on both sides of the time display screen. Reinstall the original vehicle frame, ensuring that the upper two buckles on the radio frame are positioned beneath the original vehicle frame. The installation of the new radio is complete.
FAQ
Q: What tools are required for disassembly?
A: Wires, Install bracket, Installation tools are required for disassembly.
Q: What should I do if the wiring harness does not match during installation?
A: Contact customer service to request the correct wiring harness.
Q: How can I get assistance if I encounter problems during installation?
A: Contact us at [email protected], and we will respond within 24 hours to help solve any installation issues.
Q: Is this product FCC-compliant?
A: Yes, this product complies with FCC Part 15 regulations.
For Toyota RAV4 2013-2019 / C7271
Central Control Disassembly and Operation Post-installation rendering
TOOLS REQUIRED FOR DISASSEMBLY
- Wires
- Install bracket
- Installation tools
Disassembly
- Use a pry bar to open the original vehicle frame on the outer side of the time display screen, then remove the time display screen.
- Loosen the two screws above the fixed air conditioning vent using a screwdriver, then remove the air conditioning vents on both sides.
- Unscrew the two screws on both sides of the fixed radio, then remove the radio and disconnect the wiring.
PROPOSE
Before starting the replacement job, you should prepare tools such as a
plastic pry tool and a screwdriver, and make sure the car’s power is cut off
during the installation.
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
- Pry open the buckle and remove the two air conditioning vents separately from the original vehicle frame.Align the buckle and install the two air conditioning vents onto the new radio frame, then plug the new radio into the original vehicle wiring.
- Install the new radio and secure the buckle on both sides of the time display screen.Reinstall the original vehicle frame, ensuring that the upper two buckle on the radio frame are positioned beneath the original vehicle frame.The installation of the new radio is complete.
COMPARISON
Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some
problems during installation. If you still have any questions about the
installation after reading this manual, you can contact usand we will respond
to you within 24 hours. Don’t worry; we will do our best to solve the problem
for you until you are satisfied.
After-sales email:[email protected]
WARN FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation