GOLDEN LIGHTING 1088-M Adeline 1 Light 9 inch Matte Black Instruction Manual
- June 13, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 1088-M Adeline 1 Light 9 inch Matte Black
Thank You for Choosing Golden Lighting for Your Lighting Needs!
Product Information
- Model: 1088-M
- Color: MBG-CLR (Metallic Bronze with Clear Glass)
- Fixture Type: Pendants & Chandeliers
- Suitable for use in kitchens, dining rooms, and open areas
- Can be installed with dimmers for adjustable light output
- Coordinating fixtures like sconces, flush mounts, and pendants available for layered lighting
Product Usage Instructions
- Pendants & Linear Pendants Above a Kitchen Island:
- Center a linear pendant over the island.
- If hanging pendants, use one pendant for every 24 inches of the island.
- Fixtures should hang at least 30 inches above the countertop.
- Pendants & Chandeliers Above a Dining Room Table:
- Fixtures should stay at least 30 inches above the table. – Use a fixture that is 12 inches narrower than the width of the table.
- Pendants and Chandeliers in Open Areas:
- The bottom of the fixture should hang at least 7.5 feet from the floor.
- Allow clearance for any opening doors.
- Installation Process:
- Identify the fixture’s wires:
- Fixture Wires: Hot, Neutral, Ground
- House Wires: Hot, Neutral, Ground
- Connect the corresponding wires:
- Hot to Hot, Neutral to Neutral, Ground to Ground.
- Follow the provided assembly instructions (not included in the text extract) to assemble the fixture.
- Install light bulbs (not included) into the socket according to the fixture’s specifications. Do not exceed the maximum recommended wattage.
- Turn on the power and test the installation.
Note: For customer service and replacement parts, please contact the place of purchase. We appreciate your business and hope you love your new light! For more information, expert lighting advice, and coordinating lights, please visit www.GoldenLighting.com .
Follow us on social media to share your pictures and tag us:
- Instagram: @GoldenLighting, @GLFixtures, @GoldenLighting1
- Twitter: @GoldenLighting
- Please let me know if you have any further questions or need additional assistance!
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop. Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table. Pendants and Chandeliers in Open
Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
- Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting. This ensures that your space will have both task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic.
- Install the lights with dimmers that allow you to control the level of light output at any given moment.
- Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com .
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
@GoldenLighting
@GLFixtures
@GoldenLighting1
@GoldenLighting
Assembly Instructions : 1088-M
How to Identify the Fixture’s Wires
Comment identifier
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove old fixture from wall, including the old mounting strap.
-
From the parts bag remove the mounting strap (A) assembly. One end of nipple (F) should be attached to mounting strap (A) with washer (C) and hex nut (D) in place. The other end should have canopy loop (H) attached. Attach mounting strap (A) to the junction box using mounting screws (B) and a screwdriver. Tighten securely.
-
Unscrew canopy loop collar (I) from canopy loop (H). Pass canopy (G) over the mounted canopy loop (H) to test the height. Approximately half of the canopy loop’s (H) exterior threads should be exposed, and the canopy loop collar (I) should fit snugly onto the canopy loop (H). Remove canopy (G) and adjust the height of nipple (F) and canopy loop (H) until the desired height is reached.
ASSEMBLING THE FIXTURE -
By measuring, determine the correct of the number of rods (L & M) needed for proper hanging height. Carefully put the wires through the desired rods (L & M) and connect all rods together. Thread one end of the rods to small loop (K) and the other end to another small loop (P). Secure the small screw (N) to the small loop (P) by the short rod (L). Carefully pull out the wires from the rods until taut. Feed the remaining fixture wire through chain link (J), up canopy loop collar (I), canopy loop (H), canopy (G), and nipple (F). Connect the small loop (K) on the rod and the canopy loop (H) with the chain link connector (J). Close the connector to secure.
-
Connect the small ring (P) and the bottom loop (R) by the adjustable ring (Q).
CONNECTING THE WIRES -
Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION -
Attached the glass (V) to the glass holder (S) and secure with the decorative ring (W). 7. Raise canopy (G) up to the ceiling and slide canopy loop collar (I) up beneath the canopy (G). Tightly thread canopy loop collar (I) onto canopy
Thank You for Choosing Golden Lighting for Your Lighting Needs!
Documents / Resources
|
GOLDEN LIGHTING 1088-M Adeline 1 Light 9 inch Matte
Black
[pdf] Instruction Manual
1088-M Adeline 1 Light 9 inch Matte Black, 1088-M, Adeline 1 Light 9 inch
Matte Black, 9 inch Matte Black, Matte Black
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>