KEMIMOTO B1709-00501BK Gun Boot Bracket for ATV Instruction Manual

June 1, 2024
KEMIMOTO

KEMIMOTO B1709-00501BK Gun Boot Bracket for ATV

KEMIMOTO B1709-00501BK Gun Boot Bracket for ATV 

BEFORE YOU BEGIN

  1. Please read the instructions carefully and verify that each item is in the list.
  2. Please retain these installation instructions for further reference and parts ordering information.

IMPORTANT

  1. Please read the installation instructions carefully before you start.
  2. If the vehicle is clean and free of other debris, it will be easy to install.
  3. For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.

PRODUCT INFORMATION

  1. Bracket A x1
    Product Information

  2. Bracket B x1

  3. Bracket C x1

  4. U-Bolt x3

  5. M8 Nut x8

  6. M8 Lock Nut x2

  7. M10 Lock Nut x2

  8. Velcro Strap x1
    Product Information

  9. Open End Wrench x1

INSTALLATION TIPS

  1. Install bracket A [1] to the rear rack with three U-bolts [4] and six M8 nuts [5].
    Installation Tips

  2. Install bracket B [2] on bracket A [1] with two M10 lock nuts [7].
    Installation Tips

  3. As shown in the figure, install the tool set and bracket C [3] in sequence on the bracket assembled in step 2 with two M8 nuts [5] and two M8 lock nuts [6].
    Installation Tips

  4. Secure the tool boot with velcro strap [8].
    Installation Tips

www.kemimoto.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals