KEMIMOTO B0106-16101BK No Drilling Golf Cart Side Mirrors User Manual
- May 15, 2024
- KEMIMOTO
Table of Contents
KEMIMOTO B0106-16101BK No Drilling Golf Cart Side Mirrors
Product Specifications
- Mirror-L x1
- Mirror-R x1
- M6xL30 Screw x4
- M6 Nut x4
- 0.75 inch Pipe Clamp-L x1
- 0.75 inch Pipe Clamp-R x1
- 1.0 inch Pipe Clamp-L x1
- 1.0 inch Pipe Clamp-R x1
- 1.25 inch Pipe Clamp-L x1
- 1.25 inch Pipe Clamp-R x1
- Hexagonal Wrench 4mm x1
- Socket Wrench 10mm x1
Product Usage Instructions
Before You Begin
- Please read the instructions carefully and verify that each item is on the list.
- Retain these installation instructions for further reference and parts ordering information.
Installation Tips
Step 1 – Passenger Side Installation
According to the size of the vehicle square tube, install the corresponding pipe clamp.
Step 2 – Mirror Installation
- Install the left mirror [2] to the pipe clamp [6] using two M6 screws [3] and M6 nuts [4].
- Repeat the same steps to install the right-side mirror.
Functionality
It fits 0.75-inch, 1.0-inch, or 1.25-inch diameter square tubes on the passenger side.© 2023 Kemimoto. All Rights Reserved. Infringement will be prosecuted.
Frequently Asked Questions
- Q: How long does it take to install the product?
- A: The estimated installation time is 15 minutes.
- Q: What tools are required for installation?
- A: You will need a hexagonal wrench (4mm) and a socket wrench (10mm).
BEFORE YOU BEGIN
- Please read the instructions carefully and verify that each item is in the list.
- Please retain these installation instructions for further reference and parts ordering information
PRODUCT INFORMATION
- Mirror-L x1
- Mirror-R x1
- M6xL30 Screw: x4
- M6 Nut x4
- 0.75-inch Pipe Clamp-L x1
- 0.75-inch Pipe Clamp-R x1
- 1.0 inch Pipe Clamp-L x1
- 1.0 inch Pipe Clamp-R x1
- 1.25-inch Pipe Clamp-L x1
- 1.25-inch Pipe Clamp-R x1
- Hexagonal Wrench 4mm x1
- Socket Wrench 10mm x1
IMPORTANT
- Please read the installation instructions carefully before you start.
- If the vehicle is clean and free of other debris, it will be easy to install.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
INSTALLATION TIPS
- According to the size of vehicle square tube, install the pipe clamp.
- Install left mirror [2] to pipe clamp [6] with two M6 screws [3] and M6 nuts [4]. Repeat steps to install the other side mirror
FUNCTION
- It fits 0.75inch 1.0inch or 1.25inch diameter square tube.
- The mirror can be swung front and back 180°.
- www.kemimoto.com
- Designed by Kemimoto Group
- Kemimoto All Rights Reserved, Infringement must be prosecuted.
References
Read User Manual Online (PDF format)
Loading......