KEMIMOTO F1117 Heated Vest User Guide

KEMIMOTO F1117 Heated Vest

What’s Included

• HEATED VEST x1

• RECHARGEABLE BATTERY x1

• USB POWER CABLE x1

Read all safety warnings and instructions. Failure to follow warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

Cleaning Instruction

IMPORTANT: Disconnect and remove the battery from the zipper pocket, put the connector back, and zip up before washing the vest.

RECOMMEND TO USE MESH LAUNDRY BAG

• LINE DRY
• MACHINE WASH
• GENTLE CYCLE IN COLD WATER
• HAND WASH WITH COLD WATER
  • DO NOT IRON
  • DO NOT BLEACH
  • DO NOT DRY CLEAN
  • DO NOT WRING OR TWIST
    

Operation Instruction

1. Connect the battery to the power cord in the pocket
2. To power on, press and hold the single key for 3 seconds. Press the power button to toggle the heat level between high (red LED light), medium (blue LED light) and low (green LED light).
3. To power off, press and hold the power button for 3 seconds until the LED light turns off.
4. Protection function: When the temperature reaches 55°C, the clothes will stop heating, and the heating will continue after the temperature drops to 45°C.
5. Automatic power-off function: When you take off your clothes but forget to turn off the button, the system detects that the clothes have been in a static state for a long time, and it will automatically turn off the system.
6. Voice command function: the heating system can be woken up and the temperature and gear can be adjusted by voice.

Heat Setting Indicator

The heating level can be adjusted by pressing the power button. Each press will cycle through the apparel’s temperature settings. At a room temperature of 77°F/25°C, the heat will rise to 122-131°F/50-55°C on high, 113-122°F/45 50°C on medium, and 104-113°F/40-45°C on low.

Battery Instruction

USB: 5V/2.1A
Weight| 9.52oz(270g)

BATTERY CHARGING

1. Press the battery button to check the remaining power level or charging level.
2. Remove battery from the vest before charging and connect battery with charger.
3. It takes about 5-6 hours to fully charge a completely empty battery.

NOTE

• Do not freeze or immerse the battery in water or any other liquid.
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave,incinerate or paint the battery.
• Do not store your battery with metal objects, such as coins, keys or necklaces. If the battery terminals come in contact with metal objects, this may cause a fire.
• Recommended operating temperature of 14°F to 86°F(-10°C to 45°C).
• Fully charge before first use.
• Fully charge every 6 months if not in use to preserve the battery life.
• Keep the battery away from moisture. Store the battery pack where the relative humidity is 60 ± 15% RH.

Voice command instructions

1. The user can wake up the voice module through the voice command words “KEMI”, “Hi KEMI”, “HELLO KEMI”

2. Enter the pairing mode through the voice command word “Pairing”, the pairing time is 30 seconds, and there will be a “beep” when exiting the pairing
   a. The voice module starts pairing mode, and the light starts to flash slowly
   b. For the device that needs to be paired, press and hold the button for ten seconds to enable the device to enter the pairing operation (the red light flashes slowly)
   c. When the red light of the paired device flashes three times quickly, the pairing is successful

3. After successful pairing, you can perform related operations on the paired device through voice commands.

Voice command word:

gear
socks medium| socks medium / socks medium level| Switch all socks to medium gear
gloves medium| gloves medium / gloves medium level| Switch all gloves to medium gear
pairing mode| pairing| Enter pairing mode
trousers ON| Trousers ON| Turn on all pants
vest ON| Vest ON| Turn on all vests
slippers ON| Slippers ON| Turn on all slippers
shoes ON| shoes ON| Turn on all shoes
trousers OFF| trousers OFF| Turn off all pants
vest OFF| vest OFF| Turn off all vests
slippers OFF| slippers OFF| Turn off all slippers
shoes OFF| shoes OFF| Turn off all shoes
trousers low| trousers low / trousers low level| Switch all pants to low gear
vest low| vest low / vest low level| Switch all vests to low gear
slippers low| slippers low / slippers low level| Switch all slippers to low gear
shoes low| shoes low / shoes low level| Switch all shoes to low gear
trousers high| trousers high / trousers high level| Switch all pants to high gear
vest high| vest high / vest high level| Switch all vests to high gear
slippers high| slippers high / slippers high level| Switch all slippers to high gear
shoes high| shoes high / shoes high level| Switch all shoes to high gear
trousers medium| trousers medium|trousers medium level| Switch all pants to medium gear
vest medium| vest medium / vest medium level| Switch all vests to medium gear
slippers medium| slippers medium / slippers medium level| Switch all slippers to medium gear
shoes medium| shoes medium / shoes medium level| Switch all shoes to medium gear

APP operation pages and instructions

1. Open the Heatech APP and enter the main page as shown in the figure below. (Upon first installation, location permission will be prompted and must be allowed.)
   

2. Click on the icon in the upper left corner to enter the device page. The App will automatically search for nearby heated clothing devices, as shown in the figure below.
   

3. The types of devices include Cloth, Glove, Vest, and other series of devices. The App displays the device name as the type followed by the last four digits of the Mac address.

4. In the “Available devices” module, simply click on the device name to automatically connect to the device and display it in the “List of paired devices” module.

5. In the “List of paired devices” module, you can view the current status and battery level of the device, as well as modify the name, refresh, and delete operations.
   • If the device is powered off or not connected, the device icon will be displayed in white. If the device is powered on and connected, the icon will be displayed in red.
   •  Edit: Click Edit to edit the selected device name, up to a maximum of 14 characters. If the name is blank when saved, it will be modified back to the default name.
   •  Refresh: Generally used when the device is powered on again, clicking Refresh can quickly connect to it.
   •  Delete: Click Delete to delete the selected device. After deletion, the “List of paired devices” module will no longer display the device, but it can be reconnected in the “Available devices” module.

6. Clicking the refresh icon at the bottom of the page can search for nearby heated clothing devices again.

7. On the main page, you can perform operations such as turning the device on or off, setting the gear position, adjusting the backlight, and setting the countdown timer.
   

8. All connected device types will be displayed on the main page. “SelectAll” can be used to select all or deselect all.

9. Different temperature values can be set on the temperature disk, with a default range of 35℃-55℃(95℉-131℉).

10. When switching to different gears, the device icon will display different colors accordingly, and the colors will be synchronized with the device’s LED backlight.

11. Click the switch to turn on/off the selected device. The device icon will turn white when turned off and red when turned on.

12. Click the backlight switch to turn the backlight on/off for the selected device. When the backlight is turned off, switching gears or pressing the device button will cause it to briefly light up for 2-3 seconds before automatically turning off.

13. Set the countdown time and click OK to start the countdown operation. The device will automatically shut down after the countdown ends. Currently, the minimum countdown time is 15 minutes and the maximum is 6 hours.

14. In the settings page, you can set the temperature unit and view the “About Us” page.
    

15. Static detection sensor: Users can customize the three-axis function of the device to be turned off. After turning off, even if the device is inactive for ten minutes, it will not automatically shut down.

16. Temperature Unit: Set the temperature unit according to actual needs, which can be set to ℃ or ℉. After adjustment, the temperature on the main page will respond accordingly.

17. About Us: View the “About Us” page, including the APP logo, website, and version number.

How to obtain the APP

Common issues with the APP and corresponding solutions

Serial Number| Problem Description| Problem Cause| Solution Method
---|---|---|---
1| Bluetooth connection failure|

1. The device is disconnected from power.
2. The device is connected to another device.
3. Bluetooth permission issues.

|

1. Check the power supply and restart.
2. Exit the APP on other devices or disconnect from the device.
3. Find the APP permission settings and allow access to Bluetooth permissions.

2| Automatic shutdown of device|

1. Power off the device.
2. Turn off the device.
3. Three-axis function of the device.

|

1. Check the power supply and restart.
2. Press and hold the device button to power on or use the App to turn on the device.
3. The device will automatically shut down after ten minutes of inactivity. This feature can be disabled in the settings if not needed.

3| Short backlight lighting time|

1. The backlight function has been turned off

|

1. In the App, set the backlight switch. If the backlight is off, it will automatically turn on for 3 seconds when using the button or setting the temperature in the App.

4| Device powers on normally, but not displayed in APP|

1. The device is not paired.
2. The device is paired but not connected.

|

1. Add the device from the online devices to the paired devices.
2. Click on the device in the paired devices.

5| Temperature setting is invalid|

1. The device is not selected.

|

1. Select the device to be set in the App, and a white frame will appear around the selected device.

6| Device status display viewing|

1. The interface displays the status of the first selected device by default.

|

1. Deselect all and only select the device in question.
2. Deselect the device first and then select it again.

Safety Instruction

  Do not try to use this product outside of its designated use, as doing so might be dangerous.

• Do not use this heated vest with an infant, child, a helpless person, or anyone insensitive to heat, such as a person with poor blood circulation.
• If your health condition makes you sensitive to overheating, please consult your physician to determine whether it is appropriate to use this product.
• Do not allow the cords to be pinched or forced pull out.
• Not recommended to wear over bare skin.
• Never use it if inner liner is wet.
• Turn off the power immediately if discomfort occurs.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

1 Year Limited Warranty

Customer Support

Please contact us if you have any questions
  service@kemimoto.com | http://www.kemimoto.com

References

• Aftermarket UTV Accessories & Parts for SxS – Kemimoto

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>