KEMIMOTO B0113-09801BK Outlander Rear Storage Box User Manual
- October 30, 2023
- KEMIMOTO
Table of Contents
KEMIMOTO B0113-09801BK Outlander Rear Storage Box
Product Information
- Storage Box x1
- Fixing Fixture x2
- Bracket-1 x2
- M5x20 Screw x4
- M5 Lock Nut x4
- M6x16 Screw x8
- Bracket-2 x2
- M5 Spring Washer x4
- M6 Spring Washer x8
- M6 Flat Washer x8
- EVA Pad (150x150x10mm) x3
Before You Begin
- Read these instructions and check to be sure all parts and tools are accounted for.
- Please retain these installation instructions for future reference and parts ordering information.
Important
- Please read the installation instructions carefully before you start.
- If the vehicle is clean and free of other debris, it will be easy to install.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
Installation Tips
Please follow the steps below to install the product:
-
Assemble fixing fixture [2] and bracket-1 [3] with two M5x20 screws [4], M5 nuts [5] and M5 spring washer [8].
-
Turn the box [1] upside down. Install two brackets-1 [3] and two brackets-2 [7] to the bottom of the box [1] with eight M6x16 screws [6], M6 spring washers [9] and M6 flat washers [10]. If you find a gap between the bottom of the box [1] and the vehicle, please add some EVA pads [11] to eliminate the gap.
- Install the box [1] to vehicle. Make sure fixing fixtures [2] and brackets-2 [7] are in their respective holes and the box [1] is in middle of rack.
- Lock the two fixing fixtures [2] to secure the box [1]. Finish installation.
ABOUT COMPANY
- www.kemimoto.com
- Designed by Kemimoto Group 2022
- Kemimoto All Rights Reserved,Infringement must be prosecuted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>