RIPTUNES CDB-237BT CD MP3 Stereo Boombox with AM FM Radio User Guide
- June 6, 2024
- RIPTUNES
Table of Contents
CD MP3 Stereo Boombox with AM FM Radio
IEILEZ 903 MaOW 101c1 lila 340N /oluvnsn 3a ivnNvw ming scuasn
SAFETY PRECAUTIONS
READ THIS MANUAL CAREFULLY BEFORE OPERATING AND RESERVE IT FOR FUTURE REFERENCE. REFER TO IT WHEN ENCOUNTERING ANY OPERATING PROBLEM.
- WARNING: To reduce the risk of electric shock or damage to the player’s main speakers, do not disassemble the player. There are no user-serviceable parts inside. Contact technical support for further assistance.
- WARNING: To prevent fire or electric shock hazards, do not expose the player to rain or moisture (including drips or splashes). Objects filled with liquids, such as vases and water bottles, should not be placed on or near the player. Do not touch the unit with wet hands.
- WARNING: Do not expose the radio/cassette player or batteries to excessive heat, such as direct sunlight, fire, or other heat sources.
- WARNING: Use only the attachments/accessories provided by the manufacturer, except for a standard 3.5 mm (1/8″) auxiliary cable.
- Do not place objects on top of the player.
- Do not place the player on an unstable table, stand, tripod, bracket, or cart. The player may fall, resulting in possible damage or injury.
- Unplug the power from the outlet during lightning storms or when the player is not in use.
- Pay attention to the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and/ or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete outlet.
- Protect the POWER cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the player.
- Dispose of this player properly, respecting your local laws for electronics and battery disposal.
- DO NOT STARE INTO THE CD PLAYER LASER BEAM.
WARNING: THE POWER CORD ON THIS PRODUCT CONTAINS LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS, OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
FCC WARNINGS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF WARNING FOR PORTABLE DEVICES:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
| 
|
---|---|---
THE LIGHTNING FLASH WITH THE ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF NON-INSULATED “DANGEROUS
VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.| TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR REAR COVER. NO USER-SERVICEABLE
PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.| THE
EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
INTRODUCTION
Congratulations on your purchase of this CD MP3 Stereo Boombox with AM FM Radio! For your safety, and to get the most enjoyment from your player, please completely read these instructions provided.
FEATURES
- CD MP3 Disc Playback (CD, CD-R/RW)
- AM/FM Radio
- Wireless Audio – Streaming from your Bluetooth® devices
- SD/USB/ Ports for MP3 Files Multimedia Player
- AUX in, 3.5 mm line in Jack – Connect your Devices
- Program 30 radio stations, 20 CD tracks, or 99 M P3 tracks
- Stereo Speakers
- LED color Flashing Lights with the Music Beat (on/off option)
- Folding Carry Handle
- Telescopic Antenna
- 4 Digit LED Display
- Runs an AC Power 120V or 6x C batteries
- Remote Control
WHAT’S IN THE BOX
-
Your boombox
-
This user manual
-
A remote control
-
A power cable
BATTERY INSTALLATION (BATTERIES NOT INCLUDED) -
The remote takes 2 AAA Batteries. When using the remote, be sure to point it at the front of the boombox.
-
The boombox takes 6 C batteries but also plugs into the wall.
To install batteries into the remote or the boombox, open the battery cover on the back of the remote, or on the bottom of the boombox). Then, match the “+” and “-” signs with the batteries. Replace the battery cover. If the boombox unit is not used for an extended period of time, remove the batteries before storing them.
PRODUCT DIAGRAM
-
Handle Collapsible carry handle.
-
CD Open/Eject: Press to open the lid and load/replace a CD.
-
Function /mode button: This selects the different modes of the boom-box. The selected mode will appear on the screen (CD/USB/CARD/FM/ AUX/Bluetooth).
• Bluetooth: The “BT” Light will be on when this mode is selected. This mode plays back audio wirelessly from Bluetooth devices. For example, you can play a song from your phone over the speakers of the boombox.
• AUX: This is
for using the 3.5mm (1/8″) audio input on the side of the boombox.
• CD: Play a standard audio CD or MP3 CD.
• Card: Playback MP3s from a USB/Thumb drive or Micro SD Card (also known as TF card). -
LED Display
-
Repeat/Program: Press once to repeat the current song, twice to repeat all songs, and again to shuffle. In radio mode, this stores the current station into memory.
-
Stop / Band: Stop Playback or (in radio mode) switch between AM/FM. 7. Play/Pause: Play or Pause in CD/USB/CARD/BT mode.
-
Prey Go to previous track; long press to fast reverse. In radio mode, this changes stations.
-
Next Go to the next track; long press for fast forward. In radio mode, this changes stations.
-
Power Switch: Switches the unit on or off and toggles LED mode.
-
Volume control: This can be used to adjust the volume at all times.
-
USB / SD Card: Insert a thumb drive (USB) or TF / SD card for MP3 playback here, then enter USB/Card mode using the function button (3).
-
Headphones ( ): You can connect headphones or earbuds here. The main speakers will be disabled while headphones are connected.
-
AUX IN: You can connect any audio source that uses a 1/8″ (3.5mm) cable here, such as a mobile device or stand-alone MP3 player.
-
POWER: Connect the power cable here.
MODES AND FUNCTIONS
PLAYING A CD
The radio powers onto “CD” mode by default. If the mode is switched, you can
get back to CD mode by pressing the FUNCTION button until “CD” appears on the
screen. Press the “Open/Close” on the CD lid to insert a CD. Gently close the
lid until it clicks in place. CDs will begin playing automatically. Use the
Play/Pause or Stop buttons as needed. Prev/Next will switch tracks/songs. The
Repeat/Program button will cycle between these 3 modes:
- Repeat the current song
- Repeat all songs
- Shuffle/random
LISTENING TO THE RADIO
Press the FUNCTION button until “FM” appears on the screen. For FM, use the
telescopic antenna to adjust signal reception. If using the radio for the
first time in your location, long-press the PLAY/PAUSE/SCAN button to
automatically scan and store radio stations. You can now use the Prev/Next
buttons to move between radio stations. To use AM radio, press the STOP/AM-FM
button to switch to AM. Press the PLAY/PAUSE/SCAN button to scan for radio
stations just as you would for FM. The antenna is not required for AM.
To save a radio station to memory, press the Program button. You can then save the station as P01, P02, P03, etc. Select the “P” number with Prev/Next and press Program again to save the station in that slot. While listening to one of your programmed stations (like “P01”) the Prev/Next buttons can be used to select any other stations that you have saved in the other slots. You can save 30 stations.
SD CARD/USB PLAYBACK
Press the FUNCTION button until “CARD” appears on the screen. Insert a USB or
CD card in the slot if needed. The buttons on the unit will act the same as CD
mode for playback (see the CD section above). The unit accepts cards/sticks
with up to 32GB capacity.
PROGRAMMING A PLAYLIST
20 songs can be programmed for a standard audio CD, and 99 songs can be
programmed for MP3 playback. To program music, press and hold the Program
button while music is stopped. Then, use Prev/Next or enter the desired song
number and press Program to store it in the program playlist. Repeat as
desired to add more songs. When done, press play to hear the playlist. Press
Stop twice to reset/erase all programming.
R EMOTE CONTROL
The buttons on the remote control work the same as they do on the boom box,
but the remote has number keys that make it easier to program a list of songs
for playback, including the 10+ and 10- buttons.
The screen will only display song times, but you may use the Dir+ and Dir- buttons to enter and exit a directory/folder on the MP3 disc, USB, or SD card.
BLUETOOTH CONNECTION AND PLAYBACK
Press the function button on the front panel to select Bluetooth (BT) model.
The BT button will light up on the front panel. Scan for Blue-tooth devices on
your phone. Connect to “ CDB237 “. After the connection is complete, play
audio from your device. Also, the boombox has a mic, and you can press play
twice to dial the last dialed number on your phone. Press play again to
disconnect.
CARE AND MAINTENANCE
DISC HANDLING
-
Do not expose discs to heat, direct sunlight, or high humidity environments. In warmer weather, do not leave discs inside a parked vehicle.
-
Store discs in their cases when not in use.
-
Stacking discs or standing them on end can cause them to warp.
-
Do not touch the disc surface while handling the disc. Instead, hold the edges.
-
Fingerprints, dust, dirt, and scratches can distort the picture or sound quality on your disc, or cause playback to skip. Beware of scratches on the disc inhibiting the laser beam system from reading and playing the disc correctly. Clean discs before use.
-
Do not use paper, tape, or adhesive labels on discs. Only use permanent markers on the top side of the disc.
-
Clean discs with a soft cloth, wiping from the center outwards.
-
DO NOT wipe in a circular fashion Do not use solvents such as benzene, household cleaning products (except those designed for CD/DVD use), or anti-static spray for vinyl records, as this can damage your device and discs.
-
Ensure the label always faces up when putting discs into the player.
CLEANING THE BOOMBOX
• UNPLUG THE UNIT BEFORE CLEANING. Use a soft, damp cloth to clean the outside. Do not wipe any internal parts or get them wet. Soapy water should be fine. Do not use any abrasive cleaning agents.
Troubleshooting
PROBLEM
|
SOLUTION
---|---
No power to the unit| · Connect the power cord or install
batteries.
No sound from speakers| · Make sure volume is up, and the unit has power.
· Make sure headphones are not connected.
· Make sure that the correct mode is selected for the music source you are
using. Use the mode button and/or function selector (on the side and the
unit).
The disc does not play prop- early| · Ensure that the disc is an Audio or MP3
CD.
· Ensure the CD door is closed.
· Ensure the disc is not scratched or dirty (dusty, soil, fingerprints, etc.)
Try cleaning the disc.
TECHNICAL SPECIFICATIONS
Power: AC: 120V – 60Hz 15W
DC: 9V(UM2*6PCS)
Output: 1.0W+1.0W
Dimensions: 230 (length) x 222 (width) x 126 (height) mm
USB and SD Card capacity: 32 GB
CD Frequency response: 31.5Hz-16KHz+/-6dB CD sample frequency: 44.1 kHz
Channel frequency response: 250Hz- 6.3KHz FM: 88-108MHz AM: 520-1710kHz
TECHNICAL SUPPORT
For questions not answered in this manual, or for warranty service, please
contact Riptunes Technical Support:
By phone: 1-888-217-7688 (9:00 AM to
6:00 PM ET)
By e-mail: [email protected]
Online: www.rip-tunes.com
© 2020 Riptunes by Impecca, a division of LT Inc., Wilkes Barre, PA. Bluetooth
is a registered trademark of Bluetooth SIG, Inc.
LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY/90 DAYS
RiptunesTM warrants this product against defects in material and workmanship
to the original purchaser as specified below provided the product is
registered online within fourteen (14) days of purchase.
PARTS – if the product is determined to have a manufacturing defect, within a
period of one (1) year from the date of the original purchase, RiptunesTM will
repair or replace the product parts at no charge (for parts) to you in the
U.S.A. and Canada.
LABOR – if the product is determined to have a manufacturing defect, within a
period of ninety (90) Days from the date of the original purchase, Riptunesm
will repair or replace the product at no charge to you in the U.S.A. and
Canada, After ninety (90) days it will be the responsibility of the consumer.
Shipping costs to and from our warranty service center is the sole
responsibility of the consumer.
To obtain warranty service by an authorized Riptunes” service center, please email us at: [email protected] to obtain a Repair and Maintenance Authorization (RMA) number and to locate the service center nearest you. Once authorized, you must mail the product, to the authorized Riptunes” service center in its original product packaging materials or equivalent, to prevent damage while in transit.
Further, should Riptunes” determine that the product is outside of the Warranty term, Riptunes” will return the product to the sender at sender’s expense without being repaired or replaced, unless authorized by the consumer to serve the out of warranty product at consumer’s expense. All handling or restocking charges for returns and/or replacements shall be non-refundable.
Riptunes” specifically excludes from this warranty any non-electric/mechanical attachments, accessories, and disposable parts including but not limited to outside case, connecting cables, batteries, and AC adaptors. Riptunes” reserves the right to repair or replace defective products with the same, equivalent, or newer models.
We reserve the right to either repair or replace the product at our discretion. The replacement may be either new or refurbished and while every endeavor will be made to ensure it is the same model if the same model is not available it will be replaced with a model of equal or higher specification.
Normal “Wear and Tear” is not covered by this warranty. Further, Riptunes’ hereby reserves the right to determine “Wear and Tear” on any and all products. Tampering or opening the product casting or shell will void this warranty in its entirety.
Also, this warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; has been altered or modified without the written permission of Riptunesm; has been serviced by a non- authorized repair center of Riptunesw; has not been properly maintained or operated according to the operation manual; has been used for commercial, non- household purposes; cosmetically damaged; was not imported by Riptunesm; was not manufactured according to the specification of the United States market; improper installation or neglect; damaged due to improper packaging in shipment; damaged due to natural disasters; if the serial number for the product has been removed or defaced; or for cosmetic damages.
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE (1) YEAR
PARTS AND NINETY (90) DAYS LABOR FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE
OF THIS PRODUCT. THESE WARRANTIES AND REMEDIES ARE THE SOLE AND EXCLUSIVE
WARRANTIES AND REMEDIES IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. NO
OTHER WARRANTIES, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, ARE GIVEN.
RIPTUNES'” IS NOT RESPONSIBLE OR LIABLE FOR ANY DAMAGE, WHETHER SPECIAL,
INCIDENTAL, CONSEQUENTIAL, DIRECT OR OTHERWISE, OR WHETHER KNOWN OR SHOULD
HAVE BEEN KNOWN TO RIPTUNESrm, INCLUDING LOST PROFITS, GOODWILL, AND PROPERTY
AND PERSONAL INJURY RESULTING FROM ANY BREACH OF WARRANTY, THE INABILITY TO
USE THE PRODUCT OR UNDER ANY LEGAL THEORY IN CONTRACT OR TORT. ITUNES
LIABILITY IS LIMITED TO THE ACTUAL PURCHASE PRICE PAID TO THE RETAIL SELLER OF
THE DEFECTIVE PRODUCT.
No Riptunesm dealer, agent, or employee is authorized to make any modification, extension, change, or amendment to this warranty without the written consent and authorization from Riptunesm.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages or do not allow a limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you have other rights, which vary from state to state.
Note: Our Warranty center ships only within Continental U.S., excluding Alaska and Hawaii.
Important: Be Sure to Register Your Product at www.rip-tunes.com
Riptunes USA I PA 187111 www.rip-tunes.com I
[email protected]
*Do not send any returns to this address, as it might get lost and this will delay your repair and service process.