KEMIMOTO B1201-09001BK Golf Cart Phone Holder with Clip Instruction Manual
- June 1, 2024
- KEMIMOTO
Table of Contents
KEMIMOTO B1201-09001BK Golf Cart Phone Holder with Clip
Specifications
- SKU: B1406-05202BK
- Estimated installation time: 5-10 minutes
- Components included:
- 3 Double Ball Head x1
- 1 Phone Holder x1
- 2 Square Tube Clamp x1
- 4 Cigar Clip x1
Product Usage Instructions
Loosen and Remove:
- Unscrew component [a] of the phone holder [1] and component [b] of the square tube clamp [2] as shown in the figure.
Tighten:
- Thread the double ball head [3] through component [a] and component [b], and insert them into the corresponding phone holder [1] and square tube clamp [2].
- Tighten component [a] and component [b] clockwise.
Tighten c:
- Place the square tube clamp [2] on a 0.75-1.25 inch square tube and tighten component [c].
Unlock and Lock:
- Turn component [d] counterclockwise to open the phone holder [1]. Put the mobile phone in, turn the component [d] clockwise, and close the phone holder [1].
Install Cigar Clip:
- Install the cigar clip [4] underneath the phone holder [1].
- Clean the installation position, tear off the backing adhesive from the cigar clip [4], and adhere it to the corresponding position.
FAQ
Q: How do I know if the product is compatible with my vehicle?
A: The product is designed to fit on square tubes of 0.75-1.25 inches. Please measure your vehicle’s square tube before installation.
Q: Can I adjust the angle of the phone holder?
A: Yes, you can adjust the angle by loosening components [a] and component [b], repositioning them, and then tightening them securely.
BEFORE YOU BEGIN
- Please read the instructions carefully and verify that each item is on the list.
- Please retain these installation instructions for further reference and parts ordering information.
IMPORTANT
- Please read the installation instructions carefully before you start.
- If the vehicle is clean and free of other debris, it will be easy to install.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
PRODUCT INFORMATION
INSTALLATION TIPS
- Unscrew component [a] of the phone holder [1] and component [b] of the square tube clamp [2] as shown in the figure.
- Thread the double ball head [3] through component [a] and component [b], and insert them into the corresponding phone holder [1] and square tube clamp [2]. Tighten component [a] and component [b] clockwise.
- Place the square tube clamp [2] on a 0.75-1.25 inch square tube and tighten component [c].
- Turn component [d] counterclockwise to open the phone holder [1].
- Put the mobile phone in, turn the component [d] clockwise, and close the phone holder [1].
- Install the cigar clip [4] underneath the phone holder [1]. First, clean the installation position, tear off the backing adhesive from the cigar clip [4], and then adhere it to the corresponding position.
FUNCTION
- www.kemimoto.com
- Designed by Kemimoto Group
- Kemimoto All Rights Reserved, Infringement must be prosecuted.
Documents / Resources
|
KEMIMOTO B1201-09001BK Golf Cart Phone Holder with
Clip
[pdf] Instruction Manual
B1201-09001BK Golf Cart Phone Holder with Clip, B1201-09001BK, Golf Cart Phone
Holder with Clip, Cart Phone Holder with Clip, Phone Holder with Clip, Holder
with Clip, Clip
---|---