Neomounts FPMA-D940DD Monitor Desk Stand Instruction Manual

: June 5, 2024
: Neomounts

Table of Contents

PARTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Neomounts FPMA-D940DD Monitor Desk Stand

PARTS

STEP 1
Place the rubber pads and attach the arm to the base.

STEP 2
Install the clamp to the desk

STEP 3
Mount the monitor arm

STEP 4
Adjust the torques

STEP 5

Run the cable(s) through the cable cover

CAUTION

To ensure safety, pleas<? read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
The mount is designed for easy installation and removal. The manufaclurer shall not be liable for damage to equipment or personal injuries adsing out of human factorS or acts of nature, such as earthquake or typhoon.
It is recommended that the mount be installed by qualified personnel only.
At least two persons are needed to install or remove the product to avoid hazard of falling objects.
Ple3se carefully inspect the Drea where the mount is to be installed:
– Avoid places that are subject to high temperatures.. humidity or contact with water.
– Do not install the product near air conditioning vents or areas with excess dust and fumes.
– Only install on vertical walls and avoid slanted surfaces.
– Do not install In places subject to any shock ot vibration.
– Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewil’IQ the display panel.
Maintain s1.1fficient sp~u:;:e around the display to ensure adequate ventilation.
To ensure safe installation. first check the structure of the wall, ceiling or floor and salcct a s~urc mounting location.
The wall. ceiling or floor should be strong enough to sustain a weight of at least four times of the display a.nd mount combined. The mounting location must be able to w ithstand earhquake or other strong shock.
Oo not modify any accessories or use broken parts. Contact your dealer with any questions.
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
Drill holes and bolts win be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur cifter extended use.
Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
Please consult the English language m()nual for any dispute on c;onditions.