KEMIMOTO 1080P Infrared Digital Night Vision Binoculars for Adults Instruction Manual
- May 15, 2024
- KEMIMOTO
Table of Contents
User Manual Night Vision Binoculars for Adults
Product Overview
1. Power Button
2. IR Up /Zoom in / Up Button
3. IR Down/ Zoom out / Down Button
4. Strap Hole
5. Shot Button
6. Menu Button| 7. Mode Button
8. IR LEDs
9. Lens
10. Focus wheel
11. Battery Cover
12. View Area /display screen
13. USB port/Micro SD card slot Cover
---|---
Specification
Photo Resolution:【3M(2048×1536)】
/【2M(1600×1200)】/【1M(1280×960)】/【VGA(640×480)】Video
Resolution:【1080P(1920x1080P@30FPS )】 / 【960P (1280 x 960 @30FPS )】/
【VGA(640×480@30FPS )】
Lens:F1.0 larger aperture, f=35mm, Auto IR filter
Lens Angle:10.3°
Display Screen:Inner screen is 2.5” 640480 TFT ,
Outer screen: 98x48mm,with 6X large window magnifier
Storage Media: Micro SD card, up to 32GB
USB Port: Micro USB 2.0
Auto off : 3 min/ 5 min/ 10 min/OFF
IR LED: 5W,850nm strong infrared spotlight ,7 grades infrared adjustment
Display brightness: 7 grades adjustable
View Distance In Complete Darkness: About 600 meters
View Distance In Low Light:1 meters~infinity
Digital Zoom: Digital Zoom 4X
Power Source: 8 2AAAlkaline battery, External 5V mobile power supply
OSD Language: Multiple languages are optional
Date Stamps : Support to set date and time. Date and time stamp on photo and
video files
Operation Buttons: 6 buttons
Operation Temperature: -10℃ to +50℃
Storage Temperature: -20℃ to +60℃
Dimensions:approx. 196.3144.661.5mm
Weight: about 795g with battery
Install Batteries
♦ Please install batteries into the device before using.
♦ Open the battery cover on the back of device.
♦ Insert 8 x 1.5V AA brand Alkaline batteries into the battery compartment.
Make sure the polarity is correct.
♦ Close the battery cover.
Inserting Memory Card
♦ Please prepare a Class 10 Micro card (up to 32GB) in advance.
♦ Open the card slot cover, you will see the card slot.
♦ Insert the Micro SD card into the slot. Make sure the direction is right.
Never insert the card forcibly.
♦ Format the Micro SD card,this can improve the compatibility of Micro SD
card.
♦ To remove the card from the memory card slot of the device, press the edge
of the memory card in gently, the card will pop out. Then remove the card.
Note: If the TF card is not inserted or the card is not inserted
correctly, the prompt icon of SD card and the number of photos or recording
time will not appear on the screen when the machine is turned on. When
pressing the shoot button, the prompt of “No card” will appear.
Basic operation
➢ Turn On And Turn Off
Long press the POWER button for 3 seconds to turn on the device.
Long press the POWER button to turn off the device.
Watch the eyepiece/display screen and adjust the focus wheel according to the
actual distance to focus until the screen is clear. If the light is
insufficient or used in the evening, turn on the IR by pressing the IR Up/Zoom
in/Up Button.Increase the brightness by pressing the button repeatedly.It has
7 levels of brightness(0〉1〉2〉 3〉4〉5〉6〉7〉0…)The brightness can be adjusted
according to your needs. Long press IR up to zoom.
➢ Changing The Modes
The night version has 3 different modes : photo mode, video mode and playback
mode. Press the Mode button can change mode.
| Photo Mode| For taking still photos.
---|---|---
| Video Mode| For recording video.
| Playback Mode| For playing the recorded files.
➢ Taking pictures
-
Turn on the device,the default is Video mode. Please press the Mode button to switch to photo mode.
-
Zooming:
Keep pressing the or button to zoom in or zoom out the image. the value of magnification level appears on the LCD screen. -
Take a still photo.
– View your subject via the LCD screen.
-Adjust the focus by turning the focus wheel.
For night or insufficient light use,turn on the IR by pressing the IR Up/Zoom in/Up Button.Increase the brightness by pressing the button repeatedly.It has 7 levels of brightness(0〉1〉2〉3〉4〉5〉6〉 7〉0…)The brightness can be adjusted according to your needs.
– Press the Shot button to take a photo.
- Camera mode
- Default high quality images
- Screen brightness gear
- Infrared light gear
- Battery status
- Photo Resolution
- Number of pictures that can be taken
- SD card prompt
- Digital zoom indication
➢ Recording Video
-
Video mode
-
Screen brightness gear
-
Infrared light gear
-
Battery status
-
Video Resolution
-
Number of pictures that can be taken
-
SD card prompt
-
Digital zoom indication
-
Turn on the device,the default is Video mode. If not, press the Mode button to switch to Video mode.
-
Zooming:
-
Keep pressing the or button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
-
Start to record video.
-
– View your subject via the LCD screen.
-
-Adjust the focus by turning the focus wheel
-
For night or insufficient light use,turn on the IR by pressing the IR button.Increase the brightness by pressing the button repeatedly.It has 7 levels of brightness(0〉1〉2〉3〉4〉5〉6〉7〉0…)The brightness can be adjusted according to your needs,darker and need adjusted more brightness.
-
– Press the Shot button to start to record.The record duration will be shown on the LCD screen.
-
Finish recording.
-
– Press the Shot button again to stop recording.
-
– The device will stop recording automatically once capacity of the memory card is full.
Notice:
➢ Device Power Off
If the device fails to activate, check for defective, missing or improperly-
installed batteries. Replace or install batteries correctly.
Please make sure to use only 8x AAAlkaline batteries.
➢ Poor Image
♦ If you wear glasses, please keep them on while using the device.
♦ If at day, make sure the IR is off (if IR is on,screen is black and white or
the screen is colored)
♦ If at night, make sure you have turned on the IR,press IR up (if IR is
on,screen is black and white).
♦ Adjust the focus by slowing turning the Focus wheel . Make sure it is
focused.
IR – LED (Night vision function)
- Regarding manual focusing: users can manually focus the focus wheel according to the actual observation distance to debug the best focus until the display is clear.
- The video is silent.
- In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LED, the image will change to black and white. The IR LED have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level.
- Note: If the battery voltage is not enough, the IR LED level will down automatically. IR level can up to 7 levels when the battery power is full.
- If only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LED cannot be activated.
➢ Settings in Photo and Video Mode
Press Menu button in photo or video mode, can change the settings.
Menu | Function |
---|---|
Photo Resolution | Set the photo resolution. Options:[3M(2048×1536)] /[2M (1600 |
x 1200)] / [1M 1280×960] /[VGA 640×480]
Video Size| Set the video resolution.
Options:[FHD 1920X1080 ][960 1280×960]/ [640 640×480].
Night vision sensitivity| Choose the night vision sensitivity. Options:[Low]
/[Middle] / [High].
Burst| Options:[Off]/[On]
Lcd Bright| User can according to their need to adjust the brightness of the
Lcd screen.
Options:[Level 7] / [Level 6] /[Level 5] / [Level 4]/[Level 3]/[Level
2]/[Level1].
Power Frequency| Set the light source frequency to match frequency of
electricity supply in local region to prevent interference.
Options:[50Hz]/[60Hz].
---|---
Power Save| Set the time to shut down the device for power saving if the
device is idle.
Options:[3min]/[5min]/[10min]/[OFF].
Date&Time| Set the date and time of device.
Date Stamp| Add the date stamp on the photo or video files.
Options:[Off]/[Date]/[Date&Time].
Language| Set OSD (on-screen) language. Options:[English] / [Simplified
Chinese]/ [Traditional Chinese] / [Francais] / [nederlands] /[Espanol]
/[Italiano] /[Portugues] /[Deutsch]/ [Pyccknn]/ [Japanese]/ [Korean].
Format| Format your TF card. Format TF card will delete all files including
the protected files. Please copy the important files before confirm.
Options: [Yes] /[No].
Reset All| Restore the setup to factory default settings.
Options: [Yes] /[No].
---|---
FW Version| User can see the firmware version information.
➢ Playback
- Turn on the device, press the Mode button to switch to playback mode.
- Press Up/Down button to view photos and video files.
- Playback the video
– Press the Shot button to start playing the video files.
– Press the Shot button again to have a pause.
– Press Menu button to stop the current video playing.
Press Menu button in playback mode,the screen will display the playback menu.Press Up/Down button to scan lock or delete. And press Shot button to select one to enter the sub-menu.
Playback menu list :
Menu | Function |
---|---|
Lock | Lock or unlock the current one file or all files in memory |
card.Options:[Lock/Unlock onel]/[Lock All]/ [Unlock All].
Delete| Delete the current one file or delete all files in memory
card.Options:[One]/[All].
---|---
Download files to PC
There are two ways to download files from the device to a computer:
- By inserting the memory card into a card reader.
- By connecting the device to a computer using the supplied USB cable.
Using a Card Reader
- Eject the memory card from the device and insert it into a card reader.Then connect the card reader to a computer.
- Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card.
- Copy images from the card into a directory of your choice on the computer’s hard disk.
Connecting the Device to a PC through the USB Cable
- Turn on the night vision. Connect it to a computer through the supplied USB cable.
- When connecting to the computer, it will appears “MSDC” on the screen.
- Open [My Computer] or [Windows Explorer]. A”Removable Disk” appears in the drive list. Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
- Copy the photos or files to your computer.
NOTES on Cleaning
Before cleaning the device, disconnect it from the power supply (remove
batteries)! Only use a dry cloth to clean the exterior of the device. To avoid
damaging the electronics, do not use any cleaning fluid. Clean the eyepieces
and/or lenses only with a soft, lint-free cloth, (e.g.microfibre cloth). To
avoid scratching the lenses, use only gentle pressure with the cleaning cloth.
Protect the device from dust and moisture.
Store it in a bag or box. Remove the batteries from the device if it is not
used for a longer time