GERMAN SRC-204 Mini Maifan Stone Rice Cooker User Manual

Mini Maifan Stone Rice Cooker
SRC-204
USER MANUAL

SRC-204 Mini Maifan Stone Rice Cooker

Please read these instructions and warranty information carefully before use and keep them handy for future reference.

http://www.germanpool.com/warranty

1. Rice | Congee Key:
   1. Tap the key once to select the rice function.
   Default time is 25 minutes.
   2. Tap the key twice to select the congee function. Default time is 45 minutes.

2. Steam | Stew Key:
   1. Tap the key once to select the steam function Default time is 25 minutes.
   2. Tap the key twice to select the stew function. Default time is 90 minutes.
   Keep Warm | Cancel Key:
   1. After the cooking is finished, the rice cooker will automatically enter the keep warm state.
   2. To cancel the keep warm, tap the Keep

3. Warm Cancel Key
   Preset Timer Key:
   1. Tap the key to preset delay work time. Time range is 1-24 hours.
   2. For example, it is 13:00 in the afternoon. If you want to eat at 18:00 in the afternoon, you only need to set the appointment time to 5.0 hours. The rice cooker will start automatically and finish cooking at 18:00.

Please register your warranty information now!
For Warranty Terms & Conditions, please refer to the last page of this user manual.

Safety Notes

1. Please read the instructions carefully before use and keep them in a safe place.
2. This product is not intended for use by children, physically or mentally handicapped, or people who lack experience and knowledge. Do not allow children to come into contact with the rice cooker during operation.
3. To ensure safety, please check the rice cooker body and the power cord for damage before using the rice cooker.
4. A properly grounded outlet must be used and the plug should be securely plugged to avoid problems with poor contact.
5. Do not use the power cord for other heated products. When not using the rice cooker, the appliance should be unplugged.
6. Place the rice cooker on a stable table and keep it away from flammable materials.
7. Do not put the rice cooker directly into the water to avoid short circuit and electric shock.
8. Do not insert or remove the plug with wet hands to avoid electric shock. Do not pull on the power cord when unplugging.
9. Keep the plug clean to avoid poor contact.
10. The inner pot cannot be placed on other heating sources, otherwise it will be easily deformed.
11. Do not place any food or water before putting the inner pot into the rice cooker.
12. Do not use your face or hands near the steam outlet during the operation of the rice cooker to avoid burns. Do not cover or block the steam port with cloth, towels, etc., to avoid distortion of the lid due to overheating.
13. Do not place the rice cooker in a flammable or humid environment.
14. Do not violently hit the inner pot, otherwise the rice cooker may be damaged due to deformation of the inner pot.
15. Never use an abrasive tool to clean the inner pot to avoid damaging the maifan stone coating.
16. Only use the supplied inner pot. Do not use other inner pots instead to avoid product failure or danger.
17. After use, the rice cooker heating plate will be hot, please do not touch it to avoid burns.
18. Do not disassemble or replace parts yourself. For repairs, please contact Customer Service and Repair Center.
19. If the power cord is damaged, do not replace the other power cord. Please contact customer service and repair center for replacement.

Product Structure

Unit Body

1. Detachable Aluminum Cover*
2. Heating Element
3. Temperature Sensor
4. Body
5. Control Panel
6. Open Lid Button
7. Steam Outlet
8. Inner Pot

Accessories

Control Panel

1. Display Panel
2. Rice | Congee Key: Cook rice or congee
3. Rice Indicator Light
4. Steam | Stew Key: Steam or Stew
5. Steam Indicator Light
6. Keep Warm | Cancel Key: Keep Warm or Cancel
7. Preset Key: Preset Timer
8. Congee Indicator Light
9. Stew Indicator Light
10. Keep Warm Indicator Light
11. Preset Indicator Light

Notice Before Use

1. Before plugging in appliance, please confirm that the power supply voltage matches the product specifications.
2. Before using for the first time, please remove all the packaging materials from the product, remove the inner pot, and then wash it under the tap.
3. Before putting the inner pot into the rice cooker, please check if there is any rice grains or other food residue on the bottom of the inner pot and the heating element. If there is, please remove it first, then place the inner pot. After inserting the inner pot, please rotate it left and right to ensure that the inner pot is secure onto the heating element.

Operating Instructions

Rice Function

1. Tap the button to select the rice function.
2. The cooking time is default at 25 minutes.
3. During the cooking process, the rice indicator light is on.
4. After the cooking is finished, the rice cooker will automatically enter the  keep warm state. To cancel the keep warm, tap the   button or unplug the power cord.

http://www.germanpool.com/chi/video_corner/?video=706

Congee Function

1. Tap the button twice to select the congee function.
2. The congee time defaults to 45 minutes.
3. During the congee process, the congee indicator light is on.
4. After the cooking is finished, the rice cooker will automatically enter the keep warm state. To cancel the keep warm, tap the button or unplug the power cord.

Steam Function

1. Tap the button to select the cooking function.
2. The cooking time defaults to 25 minutes.
3. The cooking indicator lights up during the cooking process.
4. After the cooking is finished, the rice cooker will automatically enter the keep warm state. To cancel the keep warm, tap the button or unplug the power cord.

Stew Function

1. Tap the button twice to select the stew function.
2. The stew time defaults to 90 minutes.
3. During the stewing process, the stew indicator light is on.
4. After the stew is finished, the rice cooker will automatically enter the keep warm state. To cancel the keep warm, tap the button or unplug the power cord.

Preset Function

1. Tap the button to select the preset function and delay the work. For example, it is 13:00 in the afternoon. If you want to eat at 18:00 in the afternoon, you only need to set the appointment time to 5.0 hours. The rice cooker will start automatically and finish cooking at 18:00.
2. The preset time range is 1-24 hours..
3. After the preset time is over, the rice cooker will automatically enter the keep warm state. To cancel the keep warm, tap the button or unplug the appliance.

Display Status

| Standby status: The display shows “––”.
---|---
| Working status: the display screen shows that the light is always on.
| Preset Function: The display shows the length of the appointment (1.0-24 hours), taking 7 hours as an example.
| Keep Warm status: The keep warm indicator is always on, and the display screen shows the holding time.
| Countdown reminder: When cooking and cooking for the remaining 5 minutes, when the congee and double-boil have 20 minutes remaining, the display shows a countdown reminder.
| Fault status: The display shows the error code “E 0”, “E 1” or “E2”.

Care & Maintenance

Warning

1. Before cleaning, please turn off the power switch and unplug the power cord.
2. Please wait for the rice cooker to cool before cleaning to avoid burns.

Watch the video clip

http://www.germanpool.com/chi/video_corner/?video=706

Cleaning the Inner Pot Steaming Basket and Detachable Aluminum Cover

1. Remove the inner pot, steaming basket and detachable aluminum cover, wash with water, detergent and sponge. Do not use decontamination powder and wire brush.
2. If there is food stuck to the bottom of the pot, you can soak it for a while before cleaning, then wipe the inner pot clean.
3. After cleaning, dry with a soft cloth

Maintaining the Inner Pot

1. Please use a plastic or wooden spoon, do not use a metal spoon to avoid scratching the inner pot coating.
2. To preserve the stone coating, do not cut the food in the inner pot.
3. To avoid corrosion of the inner pot, do not pour vinegar or soy sauce into the inner pot.

Cleaning and Maintenance of Rice Cooker

1. Clean the rice cooker main unit, lid, lid and body with a damp cloth.
2. If there is water on the heating plate, please dry it with a cloth. If there is charred rice, please use a steel wool to rid.
3. After use, please clean the steam outlet of the lid to avoid odor or steam outlet failure.

Troubleshooting

When abnormal situation occurs, please check the following instructions first.
Please contact customer service and repair centre if it still has problems.

• Please contact customer service and repair center
The heating plate cannot be heated| • The power cord is not connected properly
• Power cord is damaged
• Board damage
• Heating plate failure
• Connection failure| • Check the power connection
• Please contact customer service and repair center
The indicator light is off and The heating
plate is not hot| • Heating plate failure
• Circuit board failure| Please contact customer service and repair center
Uncooked rice| • Too much or too little rice
• The ratio of rice to water is wrong
• The inner pot is not placed properly
• There is a foreign object between the inner pot and the heating
plate
• Inner pot deformation
• Circuit board failure
• Sensor failure| • Adjust the total capacity of rice and water, ranging from the highest to the lowest tick
• Adjust the ratio of rice to water
• Rotate the inner pot to the left and right to make the inner pot close to the heating plate.
• Remove foreign matter
• Please contact customer service and repair center
Burning when cooking| • The inner pot is not placed properly
• Inner pot deformation
• Circuit board failure
• Sensor failure| • Rotate the inner pot to the left and right to make the inner pot close to the heating plate
• Please contact customer service and repair center
Food overflows| Too much water| Reduce water volume
The display shows the error code “E0”, beeps 6 times
and all indicators are not lit| The inner pot is not placed| Press the “Keep Warm | Cancel” key to cancel the alarm, place the inner pot in the cooker
The display shows the error code “E1”, beeps 6 times
and all keys are invalid| Sensor failure| Please contact customer service and repair center
The display shows the error code “E2”, beeps 6 times
and all keys are invalid| Sensor failure| Please contact customer service and repair center

Circuit Diagram

1. Fuse
2. Temperature Controller
3. Bottom Sensor
4. PCB Board
5. Top Sensor
6. Heating Element
7. Power Board

Technical Specifications

Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail. Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

• This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

  1. Visit our website and register online: www.germanpool.com/warranty
  2. Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.

http://www.germanpool.com/warranty

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

Model No. :———————-SRC-204
Serial No. :———————–
Purchased From :————
Invoice No. :——————-
Purchase Date :——————-

1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.

2. Customer should always follow the operating instructions. This warranty does not apply to:
   – labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
   – damages caused by accidents of any kind (including material transfer and others);
   – operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.

3. This warranty is invalid if:
   – the purchase invoice is modified by an unauthorized party;
   – the product is used for any commercial or industrial purposes;
   – the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   – the serial number is modified, damaged or removed from the product.

4. German Pool will, at its discretion, repair or replace any defective part.

5. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre
Hong Kong, China
10/F, Kowloon Godown
1-3 Kai Hing Road, Kowloon Bay,
Kowloon, Hong Kong
Tel : +852 2333 6249
Fax : +852 2356 9798
Email : repairs@germanpool.com
Macau, China
3/F, Edificio Industrial Pou Fung,
145 Rua de Francisco Xavier Pereira, Macau
Tel : +853 2875 2699
Fax : +853 2875 2661
This warranty is valid only in Hong Kong and Macau

German Pool (Hong Kong) Limited
Hong Kong, China
Room 113, Newport Centre Phase II, 116 Ma Tau
Kok Road, Tokwawan, Kowloon, Hong Kong
Tel: +852 2773 2888
Fax:+852 2765 8215
Mainland China
8th, Xinxiang Road, Wusha Industrial Park,Daliang, Shunde, Foshan, Guangdong
Tel:+86 757 2980 8308
Fax:+86 757 2980 8318
Macau, China
3/F, Edificio Industrial Pou Fung,
145 Rua de Francisco Xavier Pereira, Macau
Tel:+853 2875 2699
Fax:+853 2875 2661

© All rights reserved.
Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted.
SRC-204-M-19(1.1)
www.germanpool.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>