GERMAN OSH-030 Ozone Sterilizing Hanger User Manual
- June 9, 2024
- German
Table of Contents
Ozone Sterilizing Hanger OSH-030
USER MANUAL
Please read these instructions and warranty information carefully before use and keep them handy for future reference.
Warnings & Safety Precautions
WARNING!
Read all instructions carefully before using this product.
- This product is for domestic indoor use only. If this product is used for any commercial, industrial, rental or other purposes, product warranty will be VOIDED.
- This product is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of this product by an adult responsible for their safety.
- Mind your children and DO NOT let children play with this product.
- Cleaning and user maintenance shall not be made by children without supervision.
- Check the voltage indicated on the rating label before using this product.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazards.
- Unplug this product from the power source before cleaning and maintenance.
- Contact German Pool authorized service technician for repair or maintenance of this product.
- DO NOT turn on this product if the sterilizing garment bag is not properly placed on the sterilizing hanger, or if the zipper of the sterilizing garment bag is not properly locked onto the zipper safety lock.
- Before turning on this product, make sure the seal ring of the sterilizing garment bag is securely sealed onto the sterilizing hanger, to avoid ozone escaping out.
- During ozone sterilization process, DO NOT unlock the zipper safety lock, unzip or open the sterilizing garment bag.
- When sterilization is in progress, if user presses On/Off key to turn off the product, DO NOT unzip the garment bag right away to avoid a heavy concentration of ozone gushing out. Instead, user should press On/Off key again to turn the product back on, wait till the buzzer beeps once, then unlock the zipper safety lock. Buzzer will beep 3 times, and product will start ozone neutralization process. Wait until ozone neutralization is completed before unzipping the garment bag.
- When sterilization is in progress, should power be interrupted (eg. power outage or power bank runs dry), DO NOT unzip the garment bag right away to avoid a heavy concentration of ozone gushing out. User must wait at least 45 minutes before unzipping the garment bag.
- Improper use of this product may lead to ozone escaping out of the bag. If user detects the smell of ozone, turn off this product immediately and open the window to let the ozone dissipate.
- This product must be used together with its own special sterilizing garment bag. DO NOT use other garment bags.
- This product has a maximum loading capacity of 8kg. DO NOT exceed the maximum loading capacity.
- Items to be sterilized should be hung from the hanger bar of the product. DO NOT place items on the bottom of the garment bag as it may cause the seal ring to deform.
- If the sterilizing garment bag is cracked, torn or the stitching has come loose, stop using the product immediately and replace with a new bag.
- It is suggested to replace the sterilizing garment bag once every 6 months.
- This product can only be used with a power bank or the adaptor supplied by the manufacturer. DO NOT use other generic adaptors to avoid fire hazards.
- Keep this product out of reach of children.
- If this product shows malfunction or needs repair or change of spare parts, please contact German Pool Customer Service & Repair Centre. Inspection and repair must be carried out by German Pool authorized technician only. DO NOT disassemble this product by yourself.
Product Structure
Main Body
Garment Bag
*The measurements of garment bag would slightly different from actual value.
Operation Instructions
Control Panel
Display Panel
Icon | Description | Icon | Description |
---|---|---|---|
High Sterilization Mode Indicator Light | Mode Selection Indicator Light | ||
Medium Sterilization Mode Indicator Light | Ozone Release Indicator Light | ||
Low Sterilization Mode Indicator Light | Ozone Neutralization Indicator |
Light
On/Off Key
- Press On/Off key to turn the product on and off.
- Long-press On/Off key 2 seconds repeatedly to cycle among Low Sterilization Mode, Medium Sterilization Mode and High Sterilization Mode.
Operation Instructions
-
Unzip the Sterilizing Garment Bag, place it over the Ozone Sterilizing Hanger, and make sure the garment bag’s seal ring fits snugly over the groove on the hanger to avoid ozone escaping out of the bag.
-
Hook the handle of the Ozone Sterilizing Hanger onto a sturdy rail or hook.
-
Place garments on regular hangers and hook them onto the hanger bar of the Ozone Sterilizing Hanger. Zip up the Sterilizing Garment Bag and make sure the zipper head is securely locked onto the zipper safety lock of the Ozone Sterilizing Hanger.
Note:
• If the zipper head is not securely locked onto the zipper safety lock of the sterilizing hanger, the product will not operate. -
Connect one end of the USB cable to the USB interface at the back of the product, and the other end to the power source (eg. power pack or adaptor and socket).
-
Select Sterilization Mode:
Sterilization Mode| Low
Sterilization Mode| Medium
Sterilization Mode| High
Sterilization Mode
---|---|---|---
Operation Time| 25 minutes| 35 minutes| 60 minutes
Operation
Procedure| Releases ozone for 15 minutes
Neutralizes ozone for 10 minutes| Releases ozone for 25 minutes
Neutralizes ozone for 10 minutes| Releases ozone for 45 minutes
Neutralizes ozone for 15 minutes
Recommended For| 1 – 2 thin garments| 3 – 5 thin garments| Thick garments
5.1 Low Sterilization Mode
Press On/Off key to turn on the product, Mode Selection Indicator Light and
Low Sterilization Mode Indicator Light light up constant, display panel shows
25 minutes. If the product does not receive any further command in 3 seconds,
buzzer will beep once, sterilization begins and Ozone Release Indicator Light
lights up constant.
5.2 Medium Sterilization Mode
Press On/Off key to turn on the product, long-press On/Off key for 2 seconds
to switch to Medium Sterilization Mode , display panel shows 35 minutes. If
the product does not receive any further command in 3 seconds, buzzer will
beep once, sterilization begins and Ozone Release Indicator Light lights up
constant.
5.3 High Sterilization Mode
Press On/Off key to turn on the product, long-press On/Off key for 2 seconds,
then long-press On/Off key for 2 seconds again to switch to High Sterilization
Mode , display panel shows 60 minutes. If the product does not receive any
further command in 3 seconds, buzzer will beep once, sterilization begins and
Ozone Release Indicator Light lights up constant.
WARNING!
When sterilization is in progress, if user presses On/Off key , the product
will immediately turn off. To avoid a heavy concentration of ozone gushing
out, user must wait at least 45 minutes before unzipping the garment bag.
Alternatively, user can press On/Off key again to turn the product back on,
wait till the buzzer beeps once, then unlock the zipper safety lock. Buzzer
will beep 3 times, and product will start ozone neutralization process. Wait
until ozone neutralization is completed before unzipping the garment bag.
-
After sterilization process is completed, the product will automatically start Ozone Neutralization
process, and Ozone Neutralization Indicator Light lights up constant. -
After neutralization process is completed, buzzer will beep twice and the product will
automatically turn off.
Note:
- If user disengages the zipper safety lock within the first 5 minutes into the sterilizing procedure, in approximately 3 seconds the buzzer will beep 3 times, the product will stop releasing ozone, and start neutralization process for 5 minutes, after which the buzzer will beep twice and product will turn off.
- If the zipper safety lock is disengaged after 5 minutes into the sterilizing procedure, neutralization process will extend to 10 minutes.
- If the zipper safety lock is re-engaged within 3 seconds after becoming unlocked, the product will resume sterilization.
- If user presses On/Off key right after disengaging the zipper safety lock, the product will turn off immediately.
Quick User Guide
1. Make sure the garment bag’s seal ring fits snugly
over the product.| 2. Hang garments onto the hanger bar of the product.| 3.
Zip up the garment bag and lock the zipper onto the zipper safety lock.
4. Plug in USB. (Use with power adaptor provided or power bank.| 5. Press
On/Off key to select desired mode.
(refer to table below)|
6. After sterilization and neutralization are completed, buzzer beeps twice, product automatically turns off.
Mode | Action | Display Panel | Procedure |
---|---|---|---|
Low | Press to turn on the product | 15 min |
- 10 min
Medium| Press to turn on the product
Long-press 2 seconds| | 25 min -
10 min
High| Press to turn on the product
Long-press 2 seconds
Long-press again 2 seconds| | 45 min -
15 min
Cleaning & Maintenance
WARNING!
- If this product shows malfunction or needs repair or change of spare parts, please contact German Pool Customer Service & Repair Centre. Inspection and repair must be carried out by German Pool authorized technician only. DO NOT disassemble this product by yourself.
- Before cleaning and maintenance, disconnect product from the power source.
Main Body & Garment Bag
The surface of the hanger and garment bag may be wiped with a damp soft cloth,
then wipe dry with dry soft cloth. DO NOT use abrasive cleansing brush or
scouring pad to avoid scratching the product surface. DO NOT use gasoline,
thinner, or corrosive detergent or solvent. DO NOT rinse the main body
directly with water.
Storage
- If the product will not be used for a prolonged period of time, clean it thoroughly and let it air dry completely, detach the hanger bar (diagram 1), fold the bag up (diagram 2), and place in a plastic bag for storage.
- Avoid storing in places that have vibration or near electrical appliances with cooling / heating functions.
- Store in a cool dry place away from direct sunlight, high temperature and humidity.
- Keep product out of reach of children.
Technical Specification
Model | OSH-030 |
---|---|
Voltage | DC 5V |
Power | 3.5 W |
Hanger Dimensions | (H) 205 (W) 340 (D) 150 mm |
Garment Bag Dimensions | (H) 1200 (W) 600 (D) 156 mm |
Ozone Output | 30 mg/hr |
Max. Loading Capacity | 8 kg |
Net Weight | 1.7 kg |
- Specification is subject to change without prior notice.
- If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.
- Refer to www.germanpool.com for the most updated version of the User Manual.
Warranty Terms & Conditions
Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).
-
This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:
- Visit our website and register online: www.germanpool.com/warranty
- Complete all the fields on theattached Warranty Card and mail it back to our Customer Service Centre.
Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.
Model No. : OSH-030
Serial No. :
Purchased From :
-
Customer who fails to present original purchase invoice will not be eligible for free warranty service.
-
Customer should always follow the operating instructions. This warranty does not apply to:
– labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
– damages caused by accidents of any kind (including material transfer and others);
– operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs. -
This warranty is invalid if:
– the purchase invoice is modified by an unauthorized party;
– the product is used for any commercial or industrial purposes;
– the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
– the serial number is modified, damaged or removed from the product. -
German Pool will, at its discretion, repair or replace any defective part.
-
This warranty will be void if there is any transfer of ownership from the original purchaser.
Customer Service & Repair Centre
Hong Kong
Unit B, G/F, Sunshine Kowloon Bay
Cargo Centre, 59 Tai Yip Street, Kowloon
Kowloon, Hong Kong
Tel : +852 2333 6249
Fax : +852 2356 9798
Email : repairs@germanpool.com| Macau
A, 1 Andar, Mei Kui Kuong Cheong Fase 2,
No.515 Avenida Do Conselheiro Borja, Macau
Tel : +853 2875 2699
Fax : +853 2875 2661
---|---
This warranty is valid only in Hong Kong and Macau
German Pool (Hong Kong) Limited
Hong Kong
Room 113. Newport Centre Phase II. 116 Ma TauKok Road. Tokwawan. Kowloon. Hong
Kong.
Tel: +852 2773 2888
Fax:+852 2765 8215| China
8th, Xinxiang Road, Wusha Industrial Park,
Daliang, Shunde, Foshan, Guangdong
Tel:+86 757 2219 6888
Fax:+86 757 2219 6809| Macau
A, 1 Andar, Mei Kui Kuong Cheong Fase 2,
No.515 Avenida Do Conselheiro Borja, Macau
Tel:+853 2875 2699
Fax:+853 2875 2661
---|---|---
© All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>