ONE CONTROL OC MS Silver Para Bass Buffer User Manual
- May 15, 2024
- ONE CONTROL
Table of Contents
ONE CONTROL OC MS Silver Para Bass Buffer
Specifications
- Model: Minimal Series Silver Para Bass Buffer
- Manufacturer: LEP INTERNATIONAL CO., LTD.
- Version: V2.01
- Output Impedance: Fixed at 2 k ohms
Product Usage Instructions
Regulators:
Z: Adjusts the input impedance.
Usage:
- Connect your instrument to the input of the Para Bass Buffer.
- Adjust the input impedance using the Z regulator if necessary.
- Connect the output of the Para Bass Buffer to your amplifier or other effects pedals.
- Power on the Para Bass Buffer.
- You are now ready to play with enhanced signal buffering and impedance matching.
Frequently Asked Questions
- Q: Can I use the Para Bass Buffer with active pickups?
- A: Yes, the Para Bass Buffer is compatible with both active and passive pickups.
- Q: What is the recommended power source for the Para Bass Buffer?
- A: It is recommended to use a standard 9V DC power supply with center-negative polarity for the Para Bass Buffer.
- Q: How can I reset the Para Bass Buffer to factory settings?
- A: To reset the Para Bass Buffer to factory settings, power off the unit, press and hold the Z regulator, then power on the unit while holding the Z regulator. Release the Z regulator after a few seconds to complete the reset.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>