Halo IB51800522 Ceiling Light Instructions

Halo IB51800522 Ceiling Light

Product Specifications

• Model: CJB 4, 6 SeleCCTable Series
• Options: CCT Selector Switch (2700K, 3000K, 3500K, 4000K & 5000K)
• Contents: CJB DM 6, CJB DM 4, CJB LED Trim 6, CJB LED Trim 4

Product Usage Instructions

Safety Precautions
Before installation or servicing the luminaire, ensure the power supply is turned off at the fuse box or circuit breaker to avoid electric shock or fire hazards. If in doubt, contact a qualified electrician.

Handling and Installation
When handling the product, wear gloves to protect against sharp edges. Follow these steps for installation:

1. Identify the suitable luminaire for installation based on provided photographs and dimensions.
2. Ensure the input rating of the retrofit kit does not exceed the input rating of the luminaire.
3. Use only in luminaires with compatible construction features.

Dimming Capabilities
The Halo CJB series is designed for dimming with many 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers. Enhance dimming capabilities with select dimmers featuring low end trim adjustment. Consult the dimmer manufacturer for specific load compatibility and application information.

Installation Methods
Determine the appropriate installation method based on your requirements:

• DIRECT MOUNT / CANLESS: The CJB models can be directly installed into a ceiling without the need for separate JBOX or recessed housings.

Frequently Asked Questions (FAQ)

• Q: Can I install the product myself?
  A: Installation should be carried out by a qualified electrician to ensure safety and compliance with electrical codes.

• Q: What dimmers are compatible with the Halo CJB series?
  A: The Halo CJB series is designed for dimming with many 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers. For specific compatibility information, consult the dimmer manufacturer.

CJB 4″, 6″ SeleCCTable Series Instructions

Packaging Contents

A. CJB 4″, 6″ Integrated JBox Downlight (J-Box, Selectable CCT included ) CCT Selector Switch (2700K, 3000K, 3500K, 4000K & 5000K)
Choose your favorite correlated color temperature (CCT) from 5 options using the switch F. Retrofit Kit (Only included with certain products)

• ITEMS REQUIRED
  (Purchase separately)

  • Gloves
  • Ladder
  • Safety Glasses

• OPTIONAL

  • Hole Saw
  • Drill
  • Screwdriver
  • Screws for mounting (if required by local code)

IMPORTANT SAFETY INSTRUCTIONS

• Read and follow these instructions and heed all warnings, including those on the product. Failure to do so may result in serious bodily injury or property damage.
• When using product, basic precautions should always be followed, including the following:
  • Read and follow these instructions.
  • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are certified in full compliance with UL. Before attempting installation of any recessed lighting luminaire check your local electrical code. This code sets the wiring standards for your locality and should be carefully studied before starting.
  • SAVE THESE INSTRUCTIONS AND WARNINGS.

Warning

• Risk of Fire – MINIMUM 90°C SUPPLY CONDUCTORS.
  If uncertain, consult an electrician.

• Risk of Electric Shock
  To avoid possible electrical shock, be sure that power supply is turned off at fuse box or circuit breaker before installing or servicing luminaire.

• Risk of Fire/Electric Shock
  LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components.

• Risk of Fire/Electric Shock
  Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.

• WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

Caution

Edges may be Sharp – Wear gloves while handling.

• Connect fixture to a 120 volt, 60 Hz power source. Any other connection voids the warranty.
• Fixture should be installed by persons with experience in household wiring or by a qualified electrician. The electrical system, and the method of electrically connecting the fixture to it, must be in accordance with the National Electrical Code and local building codes.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• Please examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit.
• This device is not intended for use with emergency exits.
• For Canada only per CSA C22.2 No. 250.1-16, retrofits for luminaire conversion: The retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be determined by authorities having jurisdiction. Product must be installed by a qualified electrician in accordance with the applicable and appropriate electrical codes. The installation guide does not supersede local or national regulations for electrical installations.

DIMMING

Halo CJB is designed for dimming with many 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers. Dimming capability may be enhanced with select dimmers that feature low end trim adjustment. (Consult dimmer manufacturer for specific load compatibility and application information. Note some dimmers require a neutral in the wallbox.) For the latest Halo CJB product information, please refer to specifications online at www.cooperlighting.com

DETERMINING WHICH INSTALLATION METHOD TO USE

Warning
Risk of Electric Shock – To avoid possible electrical shock, be sure that power supply is turned off at fuse box or circuit breaker before installing or servicing luminaire.

DIRECT MOUNT / CANLESS
The CJB models can be installed directly into a ceiling without requiring separate JBOX or recessed housings.

WIRING

1. Cut an opening in the ceiling by using the provided template to trace the module opening (see Figure 1). Make sure the opening is not larger than the outer flange of the LED module.
   Hole Saw Sizing| Min| Max
   ---|---|---
   CJB 4”| 3-3/4″| 4-3/16″
   CJB 6”| 5-5/8″| 6-1/8″
2. Open the cover of the attached jbox and insert the supply wires through the preferred strain reliefs in the provided jbox. Connect the bare copper (ground) wire from the jbox to the ground wire of the supply connection using the provided wire nut.
3. Connect the input (black/white) leads of the driver to the appropriate supply side wiring using the provided wire nuts.
4. Close the cover after properly securing the supply wire to the provided jbox on the rear of the LED module.
5. Module is ready to install into ceiling. (See MOUNTING section for specific instructions).

CANLESS MOUNTING

1. Bundle any excess wire and place into ceiling above the module according to local code as required.
2. Rotate both mousetrap springs upward to allow passage through the cutout in the ceiling (Figure 2).
3. Continue to press the module through the cutout in the ceiling until the perimeter flange of the module is flush against the ceiling.
4. The springs will rotate back into position and  hold the LED module tight to the ceiling.

Caution
Risk of pinching –
Do not place hands under springs during removal of the LED module.

CANLESS REMOVAL

1. Simply pull down firmly on LED module until mousetrap springs release from the ceiling. Reach through the ceiling to hold mousetrap springs up and away from the ceiling as you continue to pull the module from it’s opening.
2. Disconnect wiring.

RETROFIT INSTALLATION

• NON-SCREWBASE LED LUMINAIRES
  • LED connector is compatible with:
  • Halo 4” H245, H45, H995, H99 Series LED housings
  • Halo 6” E750, H750 and H2750 Series LED Housings.
  • LED connector meets California Title-24 high-efficacy luminaire standard as a non-screw base socket.
  • LED connector is a non-screwbase luminaire disconnect for tool-less installation.
• The CJB4 is UL Certified for use with any 4” diameter recessed luminaire constructed of steel or aluminum with an internal volume that exceeds 64” in3 addition to those noted below and does not exceed the input rating of the luminaire.
• HALO: H245ICAT, H99ICAT, H99TAT, H995ICAT, H99T, H99ICT, E4ICATSB, E4TATSB, E4RTATSB, H45ICAT, H450FR2ICAT
• The CJB6 is UL Certified for use with any 6” diameter recessed luminaire constructed of steel or aluminum with an internal volume that exceeds 152” in3 addition to those noted below and does not exceed the input rating of the luminaire.
  • HALO: H7ICAT, H7ICT, H7T, H7ICATNB, H7ICTNB, H7TNB, H7UICAT, H7TCP, H27ICAT, H27T, E27ICAT, E27TAT, E7ICAT, E7ICATNB, E7TAT, E7TATNB, H7UICAT, H7ICATNB, H7ICTNB, H7TNB, H7UICAT
  • HALO® LED: H750ICAT, H750T, H750TCP, H2750ICAT, E750ICAT, H750FR2ICAT
  • HALO LED Retrofit: ML7BXRFK, ML7E26RFK For additional information, please refer to the latest Halo LED Specification sheet found at www.cooperlighting.com.

Remodel   Housings
CAUTION: For remodel housing please follow below operation to remove housing.

1. Pull the bracket, rotate and release all brackets.(Figure 3)
2. Move the housing off from the ceiling. (Figure 4)
3. Remove AC wires from the housing and transfer to CJB j-box. (Figure 5)
4. Install the fixture by referring above direct mount instruction.

Retrofit Installation Into E26 Edison Screw Base Recessed Luminaires

1. Remove mounting bracket and plate from inside existing recessed housing (if installed).
2. Remove socket from plate (if installed).
3. Screw Edison base adapter (F) into existing Edison base socket in luminaire.
4. Remove mousetrap springs from the module (Figure 6).
5. Attach friction blades (CJB 4″) or torsion springs (CJB 6″) (Figure 7a & 7b).
6. Remove the knockout, install the Strain relief/Bushing (Figure 8)
7. Route the pig tail and ideal connector through the bushing (Figure 8 & 9).
8. Close the J-box door.
9. Plug the orange connector from the CJB LED module (A) into the orange connector included with the screw base adapter (E) (Figure 10 & 11).
10. Bundle any excess length of wire inside the luminaire (above the module) in preparation for insertion.
11. Install the module. (See MOUNTING section for specific instructions.)

RETROFIT MOUNTING

Note: A round foam gasket has been provided installation if local code requires.

Torsion Spring Installation Method

1. Properly wire the unit as instructed in the section of these instructions.
2. If the torsion springs are not pre-installed from the factory, then remove the torsion springs and screws from the separate parts bag and install them to the ends of the fixture as shown in Figure 7b.
3. For installation into a luminaire, simply press each leg of the torsion springs together and insert them through the receivers inside the luminaire. (Figure 12)
   Note: For easiest installation, insert both sides of the torsion springs simultaneously (versus one at a time).

Caution
Edges may be Sharp – Wear gloves while handling.

Friction Clip Installation Method
Note: This method works for both 4” luminaires.

1. Remove mouse trap springs from the module and discard (Figure 6).
2. Insert friction clips into friction clip holders making sure that they are fully seated, as indicated by a click when the locking feature engages.
3. Properly wire the unit as instructed in the WIRING section of these instructions.
4. Make sure both friction clips are fully installed and screwed onto the module (Figure 7a).
5. Align the module in the center of the recessed luminaire and press the module firmly into the luminaire. Take care that all wiring is away from the friction clips to avoid being pinched. After pressing into place, twist the module clockwise slightly to eliminate any gaps between the ceiling and the module trim face.

REWIRING OR UNINSTALLING THE LED MODULE Torsion Spring Method Removal

1. Pull down firmly on the module until it can’t continue downwards.
2. Reach between the flange of the module (inside the can) and squeeze the torsion spring legs together to remove them from the luminaire receptors.
3. Disconnect the LED module wiring from the recessed luminaire (LED connector or screw-in Edison base).
4. Remove ground wire from luminaire.

Friction Clip Method Removal

1. Twist the module (about 60º) counterclockwise to release the grip of the friction clips to the luminaire.
2. Pull down firmly on the module to remove it from the recessed luminaire.
3. Disconnect the LED module wiring from the recessed luminaire (LED connector or screw-in Edison base).
4. Remove ground wire from luminaire.

5-YEAR LIMITED WARRANTY

Limited warranty for five years, based on up to 6 hours of usage per day. Additional terms and conditions apply. For more details, please visit: www.cooperlighting.com/warranty

FCC Statement

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
  a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

• Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • This device must accept any interference received, including interference that may cause undesired operation.

This device complies with ISED ICES Standard Canada ICES-005(B) / NMB-005 (B).

• Cooper Lighting Solutions
  • 1121 Highway 74 South Peachtree City, GA 30269
  • P: 770-486-4800
  • www.cooperlighting.com
• Canada Sales
  • 5925 McLaughlin Road Mississauga, Ontario L5R 1B8 P: 905-501-3000
  • F: 905-501-3172
• © 2024 Cooper Lighting Solutions All Rights Reserved
  • Printed in China
  • Publication No. IB51801523

CJB4 and CJB6 Round Ceiling Templates

CJB6 – 6″ round cutout
CJB4 – 4″ round cutout

References

• HALO | Cooper Lighting Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>