ACCURATE LOCK HARDWARE M9167E Motor Drive Electrified Mortise Lock Instruction Manual

: June 1, 2024
: ACCURATE LOCK HARDWARE

Table of Contents

ACCURATE LOCK HARDWARE M9167E Motor Drive Electrified Mortise Lock
Product Usage Instructions
M9167E OPERATING INSTRUCTIONS
ELECTRICAL SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACCURATE LOCK HARDWARE M9167E Motor Drive Electrified Mortise Lock

Specifications

Product : Motor Drive Electrified Mortise Lock with Mechanical Deadbolt
Operating Voltage: 12-24V AC/DC (11V-30V)
Current: 250mA MAX Inrush, 10mA MAX Holding
Wire Gauge:
- 125’/250′ – 22
- 200’/400′ – 20
- 300’/600′ – 18
- 500’/1000′ – 16
- 750’/1500′ – 14
- 1250’/2500′ – 12

Product Usage Instructions

Mortise Lock Features:

Motorized locking/unlocking with mechanical deadbolt
Toggle action switch for Passage Mode
DS deadbolt security for enhanced privacy
Free egress at all times

Locking/Unlocking:
To lock the outside trim:

If deadbolt is projected, use the toggle or electronics to lock the outside trim.
If deadbolt is not projected, use the toggle to lock or unlock the outside trim.

To unlock and re-lock the lever:

Unlock the lever with the toggle or by projecting the deadbolt.
Lever can only be re-locked by toggle or projecting the deadbolt, not by electronics.

To manually unlock the outside lever:

If the deadbolt is retracted, manually unlock the outside lever by toggle or electronic means.
Extending the deadbolt will reset the toggle to the locked position and disable electronic control.

Electrical Control:

Lock is furnished as FAIL SECURE but can be changed to FAIL SAFE via a switch.
Cycle power once after switching between functions.

Toggle Switch:

GREEN: FAIL SAFE
YELLOW: FAIL SECURE

FAQ

Q: How do I change the lock from FAIL SECURE to FAIL SAFE?
A: Access the switch on the back of the lock and toggle it to the desired setting. Remember to cycle power once after changing.
Q: What wire gauge should I use for different distances?
A: Use the following wire gauges based on distance:
- 125’/250′ – 22
- 200′ 400′ – 20
- 300’/600′ – 18
- 500’/1000′ – 16
- 750’/1500′ – 14
- 1250’/2500′ – 12

M9167E OPERATING INSTRUCTIONS

MOTOR DRIVE ELECTRIFIED MORTISE LOCK WITH MECHANICAL DEADBOLT

Mortise lock with motorized locking/unlocking and mechanical deadbolt. Toggle action switch to Passage Mode.
DS deadbolt security for enhanced privacy.
Extension of the deadbolt will disable the electrical control of a fail secure lockset locking the OUTSIDE trim.
Retracting the deadbolt will enable the electrical control.
Free egress at all times.
If deadbolt is not projected, outside trim can be locked or unlocked with toggle. For passage mode, toggle can be set to keep outside lever unlocked.
After unlocking lever with toggle, lever can only be re-locked by toggle or projecting the deadbolt, not by electronics. After retracting deadbolt, outside lever remains locked until
manually unlocked by toggle or electronically unlocked. Extending the deadbolt will reset the toggle to the locked position and disable electronic control.

DISTANCE 12V/24V	WIRE GAUGE
125’/250’	22
200’/400’	20
300’/600’	18
500’/1000’	16
750’/1500’	14
1250’/2500’	12

ELECTRICAL SPECIFICATIONS

Voltage: 12-24V AC/DC (11V-30V)
Current: 250mA MAX Inrush, 10mA MAX Holding Non-polarized leads

Lock is furnished as FAIL SECURE and can be easily changed to FAIL SAFE via a switch. Cycle power once after switching from one function to the other . $ACCURATE-LOCK-HARDWARE-M9167E-Motor-Drive-Electrified-Mortise-Lock- $1$$