ELTA 149-EL31 AC Electronic Controller Instruction Manual
- June 1, 2024
- elta
Table of Contents
ELTA 149-EL31 AC Electronic Controller
Specifications
- Product: AC Electronic Controller
- Phase: Single Phase
- Input Voltage: 220V to 240V / 50Hz
- Product Codes: 149-EL31, 149-EL61,149-EL101
- Max Peak Current Amps: 3, 6, 10
- Weight: 0.35kg, 0.40kg, 0.80kg
- IP Rating: IP51
Product Usage Instructions
Overview:
The AC Electronic Controller is designed for use with fans equipped with thermal cut-out protection. In case of a thermal cut-out event, the controller will switch off automatically, and the trip indicator will be illuminated.
The unit features an illuminated on/off switch and a start button. To activate the controller, ensure the on/off switch is in the on position and press the start button.
Connection:
The controller should be connected as follows:
- BROWN wire – VARIABLE LIVE
- BLUE wire – NEUTRAL
- GREEN/YELLOW wire – EARTH
Controller Terminal Block:
The terminal block is labeled as follows:
- L
- N
- U2
- U1
- AUX
- E
Starting the Controller:
To start the controller:
- Ensure the power supply is connected.
- Turn the on/off switch to the on position.
- Press the start button to activate the controller.
FAQ:
Q: What should I do if the trip indicator is illuminated?
A: If the trip indicator is illuminated, it means a thermal cut-out event
has occurred. Check the fan for any issues and reset the controller by
pressing the start button after resolving the problem.
Q: Can I use the TK function with all models?
A: The TK function is available for select models. For controllers with
TK function, add the suffix TK to the model number. Note that the EL101 model
does not support this feature.
AC ELECTRONIC CONTROLLER
Overview
- Stepless speed control allows precise fan speed selection
- Provides easy adjustment of fan duty for commissioning purposes
- TK versions offer means of motor protection via motor thermal contact
- IP51 enclosure
- Stepless speed control
- Minimum and maximum speed pre-set facility
- Suitable for operating temperatures up to +40°C
- Fitted motor protection fuse
- Suitable for two or three wire control
Overview
TK versions are for use with fans fitted with thermal cut-out protection. In
the event of the thermal cut-out, opening the controller will switch off and
the trip indicator will be illuminated. Units are complete with illuminated
on/off and start button. The start button must be pressed to start the
controller once on/off switch is in the on position.
Single Phase 220V to 240V / 50Hz
Product Code| Max Peak Current Amps| Weight kg| IP
Rating
---|---|---|---
149-EL31| 3| 0.35| IP51
149-EL61| 6| 0.40| IP51
149-EL101| 10| 0.80| IP51
For controllers with TK function add suffix TK. This option is not available with the EL101.
Elta Limited has a policy of continuous product development and improvement
and therefore reserves the right to supply products which may differ from
those illustrated and described in this publication.
Confirmation of dimensions and data will be supplied on request.
Tel +44 (0) 1384 275800
Email info@eltauk.com
eltauk.com
149-EL-03-2018 Issue A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>