HKC NHV24H3 24 Inch Smart TV User Manual
- June 13, 2024
- HKC
Table of Contents
User Manual
LED TV SET
NHV24H3 24 Inch Smart TV
NHV24H3
NHV32H3
NHV42H3
WARNING
CAUTION: TO
AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to avoid the risk of electric shock,
do not disassemble this equipment by anyone except a qualified service
personnel.
**** This symbol is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the
equipment.
This equipment is a Class II or double insulated electrical appliance . It has
been designed in such a way that it does not require a safety connection to
electrical earth.
IMPORTANT SAFETY INFORMATION
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use near water.
- Clear only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. a
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, Shall be placed on the apparatus.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Mains plug or appliance coupler is used as the disconnect device, shall be readily operable.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
- The ON-MODE Power under Home Mode should be less than 35W.
- The Sleep Mode power should be less than 0.49W.
- This equipment is a Class Il or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.”
Thank you for buying this TV! Please read this manual thoroughly before
operating the TV.
Make sure the TV was not damaged in transit. Should the TV be damaged, do not
install it and contact your dealer. Check that you have all the accessories
according to the model.
SAFETY PRECAUTIONS
Caution
High voltages are used in the operation of this product. Do not open the
product’s casing. Refer servicing to qualified service personnel.
**Caution
To prevent fire or electrical shock hazard, do not expose the main unit to
rain or moisture, do not place objects filled with liquids, such as vases, on
the apparatus.
Caution
Do not drop or push objects into the television cabinet slots or openings.
Never spill any kind of liquid on the television receiver.
Caution
Avoid exposing the main unit to direct sunlight and other sources ofheat. Do
not stand the television receiver directly on other producis which give off
heat. E. g. video cassette players , Audio amplifiers. Do not block the
ventilation boles in the back cover. Ventilation is essential to prevent
failure of electrical componen!. Do not squash power supply cord under the
main unit or other heavy objects.
Caution
Never stand on, lean on, push suddenly the product or its stand. You should
Pay spe- cial attention to children.
Caution
Do not place the main unit on an unstable cart stand, shelf or table . Serious
injury to an individual, and damage to the television, may result if it should
fall.
Caution
When the product is not used for an extended period of time, it is advisable
to disconnect the AC power cord from the AC outlet.
Caution
** The LED panel used in this product is made of glass. Therefore, it can
break when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the LED panel breaks.
REMOTE CONTROL
: Power on/off button, press once to turn the TV on and press again to turn
the TV off.
INPUT: Press to change signal source.
0-9: Select and switch to a channel using 0 – 9.
GUIDE: Launches the EPG (Electronic Program Guide)
CH.LIST: Display program list.
COLOR BUTTONS (RED, GREEN, YELLOW, BLUE): Execute corresponding
function at that time.
Displays the main TV menu.
Press to start playing/pause playing the MEDIA. (In USB models)
OK : Enter the selected option or execute the selected operation.
: Switch back and front between the current and previous channels.
EXIT: Exit the main TV menu.
VOL-/VOL+: Adjust the volume.
CH /CH: Change the channel up and down.
; This button takes you to the HOME screen.
: Press this button to mute or restore sound.
TXT: Press to enter the Teletext mode.
SUBTITLE: Open or close subtitle.
INFO: Display the present screen information such as the current channel
and input source.
FREE: Press to enter VIDA Free APP.
. Press to EDIT shortcut keys.
DEEZER: Press to enter deezer APP
NETFLIX: Press to enter Netflix APP.
PRIME VIDEO: Press to enter prime video APP.
YOUTUBE: Press to enter YouTube APP.
PLEX: Press to enter PLEX APP.
BROWSER: Press to enter Browser APP
MEDIA: USB media player, for playback from USB stick.
TV TERMINAL CONNECTIONS
- RJ45
- COAXIAL output terminal.
- AV input terminal.
- LNBIN.
- RF antenna.
- HDMI3 input terminal.
- HDMI2 input terminal.
- HDMI1 input terminal.
- USB 1& 2 media player: connect the USB device, such as flash disk to access media function of TV.
- Earphone terminal.
- Cl slot.
HOME
When finish First Time setup,you can enter HOME screen.
Press button to select.
Inputs: Icon to select an input source.
Setting: Various settings can be configured here.
Notifications
VIDAA account
INPUT
Press button to select Inputs menu.
Press button to select.
Press OK to select input.
SETTING
PICTURE
- Press button to select the option that you want to adjust in the PICTURE menu.
- Press OK button to adjust.
- After finishing your adjustment, press BACK button to save and return to the previous menu.
Picture Mode
Press button to select Picture Mode, then press OK button to select.
(Optional: Standard/Cinema day/Cinema night/Dynamic/Sports).
Standard| The default mode, to make users experience high-quality images under
normal light.
---|---
Cinema day| Enhance the contrast, color and clarity of the screen to make the
color more vivid.
Cinema night| Reduce the screen contrast, color and clarity to make the screen
looks soft.
Dynamic| Enhance the contrast, color and clarity of the screen, so that the
picture in the dynamic will balance the color.
Sports| This mode is more suitable for watching sport video.
Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom in on your picture.
Press button to select Aspect Ratio.
Press button to select Automatic/16:9/4:3/Panoramic/Movie Zoom/Direct.
Game Mode
Press to select, and press to select On/Off.
Picture Mode Settings
Press to select, and press to enter.
PICTURE
Apply Picture Settings
In this menu, you can adjust current picture mode to apply to all sources or
just current source.
Press to select, and press or OK to enter.
(Optional: All Sources/Current Source)
Backlight/Brightness/Contrast/Colour Saturation/Sharpness
Press to select, and press to adjust.
| Backlight | Adjust image backlight. (Optional:Off/On) |
|---|---|
| Brightness | Adjust image brightness. |
| Contrast | Adjust image contrast. |
| Colour Saturation | Adjust image color density. |
| Sharpness | Adjust the image edge sharpness. |
Adaptive Contrast
In this menu, you can automatically darken dark areas and lighten light
areas of images to see more details. Press to select Adaptive Contrast. press
to select Off/Low/Medium/High.
Noise Reduction
Set up options to eliminate the image noise intensity.
Press button to select Noise Reduction.
Press button to select Off/Low/Medium/High.
MPEG Noise Reduction
Set up options to eliminate the MPEG noise intensity.
Press button to select Noise Reduction.
Press button to select Off/Low/Medium/High.
Color Temperature
Adjust the overall color of the image.
Press button to select Color Temperature.
Press button to select Warm1/Warm2/Standard/Cool.
Expert Settings
Adjust the color space and Gamma to best suit the content you’re viewing.
Press button to select Expert Settings. Press button to enter sub-menu.
PICTURE
Colour Tuner
Adjust the Hue, saturation and Brightness of color settings.
Press button to select Colour Tuner.
Press OK / button to enter sub-menu and adjust.
White Balance
Adjust the intensity of red, green and bule lights to view the true colors of
all images in the picture.
Press button to select White Balance.
Press OK / button to enter and adjust.
Black Level (Only available on HDMI source)
In this menu, you can adjust the HDMI signal range to be more suitable for
content.
Press to select Black Level. Press toselect.
Gamma Adjustment
Press to select Gamma Adjustment. Press to select 1.8/2.0/2.2/2.4/2.6.
Gamma Calibration
In this menu, you can adjust the Gamma curve which one you selected.
Press Ato select Gamma Calibration.
Press OK / button to enter sub-menu to adjust.
RGB Only Mode
Press Ato select RGB Only Mode. Press to select Off/Red/Green/Blue.
Overscan
Press button to select Overscan. Press OK button to select On/Off.
Reset Current Mode
Press button to select Reset Current Mode. Press OK / button to enter sub-
menu.
PICTURE
SOUND
- Press button to select the option that you want to adjust in the SOUND menu.
- Press Enter button to adjust.
- After finishing your adjustment, press BACK button to save and return to the previous menu.
Sound Mode
Press button to select your favorite Sound Mode.
(Optional: Standard/Theatre/Music/Speech/Late Night/Sports.)
| Standard | Produces a balanced sound in all environments. |
|---|---|
| Theatre | Theatre mode increases the surround sound effect and provides a more |
prominent subwofer response.
Music| Preserves the original sound. Good for musical programs.
Speech| Low and high frequencies are attenuated to improve the reproduction
and clarity of the human voice.
Late Night| Improve the reproduction and clarity of the human voice with a low
volume level.
Sports| Optimized sound for watching football game.
Headphone
Press button to select Headphone.It only available on headphone is inserted.
It can set the sound output mode through headphones.
Sound Mode Settings
Press button to select Sound Mode Settings. Press OK / button to enter sub-
menu.
Apply
Audio Settings
Adjust the Current sound mode to apply to all source or just current
source.
Press button to select, then press button to select Current Source/All
Sources.
Equalizer
Press button to select, and press to adjust Equalizer detail.
(Optional: 100Hz/500Hz/1.SKHz/5KHz/10KHz)
Bass Boost / Surround Sound / Dialog Clarity / TruVolume / Wall Mount Setup /
Auto
Volume Control
Press buttont to select, and press OK button to select On/Off.
Reset Current Mode
Press button to select, and press button to choose restore or not.
Speakers
Press button to select Speakers. Press OK / button to enter sub-menu.
Audio
Output
Press button to select Audio Output and enter, then press button to select
ARC/TV Speaker/SPDIF Only.
Digital Audio Output
Press button to select Digital Audio Out, then press button to select.
Digital Audio Delay
Press button to select Digital Audio Delay, then press button to adjust.
Lip Sync
Press button to select, then press button to adjust.
Balance
Balanced left and right channels.
Press button to select Balance. Press button to adjust.
NETWORK
Press
button to select: Network Configuration/Internet Connection/ Wake on Wireless
Net- work/Wake on LAN.
Network Cofiguration
Press button to select Network Configuration to set up the network.
Internet Connection
Press button to select Internet Connection to check Internet Connection.
Wake on Wireless Network
Press button to select Wake on Wireless Network, then press OK button to
selece On/Off.
Wake on LAN
Press button to select Wake on LAN. Press OK button to select On/Off.
CHANNEL
- Press button to select the option that you want to adjust in the Channel menu.
- Press Enter button to adjust.
- After finishing your adjustment, press BACK button to save and return to the previous menu.
Auto Scan
Automatic search can search for effective program channel automatically.
Press button to select Auto Scan, then press OK button to setup.
Rescan
In this page, you can choose rescan channel or change setup.
Reception
Press button to select Reception, and press button to select
Antenna/Cable.
Mode setup
Press button to select Mode setup, and press button to select Channel/Scan
Mode/LCN.
Auto Scan
If you want to stop searching, press Stop or Exit button
to stop searching.
Channel Edit
Press button to select Channel Edit. Advanced Settings
Press button to select Advanced Settings, then press OK / button to
enter.
Manual
Scan
Press button to select Manual Scan, then press OK button to enter.
Press button to select DTV Manual Scan/ATV Manual Scan.
DTV Manual Scan
Press button to select DTV Manual Scan, then press Enter button to enter.
ATV
Manual Scan
Press button to select ATV Manual Scan, then press Enter button to enter.
Channel List Auto-Update
Press button to select Channel List Auto-Update, then press OK button to
select On/Off.
Programme Guide Auto Update
Press button to select Programme Auto Update. Programme Auto Update
Press button to select Channel List Auto-Update, then press OK button to select On/Off.
Channel Selection
Press button to select Channel Selction.
ACCESSIBILITY
Menu
Scheme
Press button to select Menu Scheme, then press OK / button to choose
Dark/Light .
High Contrast Menu
Press button to select High Contrast Menu, then press OK button to select
On/Off.
Menu Transparency
Press button to select Menu Transparency, then press OK / button to choose
Off/Medium/ High.
Hard of Hearing Subtitles
Press button to select Hard of Hearing Subtitles, then press OK button to
select On/Off.
Audio Type
Press button to select Audio Type, then press Enter button to enter sub-menu.
Then press OK / button to select Normal / Audio Description / Spoken Subtitles
/ All Supplementary Audio.
Voiceover Volume
Press button to select Voiceover Volume, then press OK / button to select
On/Off.
Dialogue Enhancement
Press button to select Dialogue Enhancement, then press OK button to enter
sub-menu.
SYSTEM
- Press button to select the option that you want to adjust in the System menu.
- Press Enter button to adjust.
- After finishing your adjustment, press BACK button to save and return to the previous menu.
Time
Press button to select Time.
Time Format
Press button to select Time Format. (Optional: 12-hour/24-hour)
Date/Time
Set the Date and Time
Press button to select, then press OK / to setup.
Time Zone
Select your time zone
Press button to select Timer zone, then press OK / to enter sub-menu to setup.
Daylight Savings
Press button to select Daylight Savings. (Optional: Off/On/Sync from DTV)
TIMER SETTINGS
Press button to select Timer Settings.
Sleep Timer
Press button to select Sleep Timer. (Optional: Off/15/30/60/90/120
Minutes/User Defined)
Power On Timer
Press button to select Power On Timer.
Power Off Timer
Press button to select Power Off Timer.
Menu Timeout
Press button to select Menu Timeout. (Optional: Off/10s/20s/30s/60s/5 min)
Auto Sleep
Press button to select Auto Sleep. (Optional:Off/3H/4H)
Auto Standby with No Signal
Press button to select Auto Standby with No Signal. (Optional:Off/15
Minutes)
System PIN
Press button to select System PIN. Change your PIN that you use to access
Parental Controls, Auto Channel Scan and Reset To Factory Defaults.
Parental Control
Press button to select Parental Control.
Turn on Parental Controls to block children from being able to view certain
programmes.
LANGUAGE AND LOCATION
Press button to select Language and Location.
Turn on Parental Controls to block children from being able to view certain
programmes.
Location
Press button to select Location, and press OK / to select.
Menu Language
Press button to select Menu Language, and press OK / to select.
Primary Audio
Press button to select Primary Audio, and press OK / to select.
Secondary Audio
Press button to select Secondary Audio, and press OK / to select.
Primary Subtitle
Press button to select Primary Subtitle, and press OK / to select.
Secondary Subtitle
Press button to select Secondary Subtitle, and press OK / to select.
Digital Teletext
Press button to select Digital Teletext.
(Optional: WEST EUR / EAST EUR / Russian / Aarabic / Persian / Greek)
APPLICATION SETTINGS
Press button to select Application Settings.
Content Sharing
Press button to select Content Sharing, then press OK button to select
On/Off.
Hbb TV
Press button to select Hbb TV, then press OK button to select On/Off.
Clear Cache
Press button to select Clear Cache, then press OK / button to enter sub-menu.
Delete Cookie
Press button to select Delete Cookies, then press OK / button to enter sub-
menu.
Do Not Track
Press button to select Do Not Track, then press OK / button to enter sub-
menu
Prime Video
Press button to select Prime Video, and press OK / to select.
Netflix
Press button to select Netflix, and press OK / to select.
HDMI &CEC
Press button to select HDMI&CEC, then press OK button to enter sub-menu to
select.
Press
button to select CEC Control/Device Auto Power Off/Device Auto Power On/ TV
Auto Power On/CEC Device Lists.
Note: All the Options are available only when the CEC Control select On.
CEC Control
Press button to select CEC Control, and press OK button to select On/Off. The
following terms are available only when “On” is selected in CEC Control.
Device Auto Power Off
Press button to select Device Power Off, and press OK to select On/Off.
Device Auto Power On
Press button to select DeviceAuto Power On, and press OK buttonto select
On/Off.
Tv Auto Power On
Press button to select TV Auto Power On, and press OK buttonto select On/Off.
CEC Device Lists
Press button to select CEC Device Lists, and press OK button to enter.
Usage Mode
Press button to select Usage Mode, then press OK / button to select Home
Mode/Store Mode.
ADVANCED SETTINGS
Press button to select Advanced Settings, then press OK / button to enter
TV
Name
Press button to select TV Name, then press OK / button to setup your TV
name.
Screen saver
Press button to select Screen saver, then press OK / button to enter.
(Optional: None/5 Minutes/10 Minutes/20 Minutes)
Input Labels
Press button to select Input Labels, then press OK / button to enter.
(Optional: TV/AV/HDMI1/HDMI2/HDMI3)
Notifications
Press button to select Notifications, then press OK / button to enter sub-menu
and select.
Enhanced Viewing
Press button to select Enhanced Viewing, then press OK / button to enter sub-
menu and select.
Setup Wizard
Press button to select Setup Wizard, then press OK / button to select.
Fast Power On
Press button to select Fast Power On, then press OK button to select On/Off.
Power On Mode
Press button to select Power On Mode, then press OK / button to select.
SUPPORT
System Info
View System information
Press button to select System Info, then press OK / button to enter sub-menu.
Self Diagnosis
Perform self diagnosis to test sound, picture and connections.
Press button to select Self Diagnosis, then press OK / button to enter sub-
menu.
E-Manual
Press button to select E-Manual, then press OK / button to enter sub-menu.
System Update
Set your TV to receive the latest firmware.
Press button to select System Update, then press OK / button to enter sub-
menu.
Disclaimer and Privacy
Click to read the Disclaimer details.
Press button to select Disclaimer and Privacy, then press OK / button to enter
sub-menu.
Mobile App Download
Press button to select Mobile App Download, then press OK / button to enter
sub-menu.
Restore To Factory Default
Press button to select Restore To Factory Default, then press OK / button to
enter sub-menu and select.
Press MENU button to wakeup Menu, then press button to select. Channel
List
Press button to select Channel List, then press OK button to enter sub-
menu.
Guide
Press button to select Guide, then press OK button to enter sub-menu.
Subtitle
Press button to select Subtitle, then press button to select Off/On.
Audio Only
Press button to select Audio Only. Press OK button enter the sub-menu.
Settings
Press button to select Settings. Press OK button enter the sub-menu. Please
refer to the home page–Setting part.
MEDIA
Press button to select Media on the Home page or press MEDIA button on the
remote, and press OK button to enter enter the Media Center.
Video
Press button to select Video or All, and press button to select Movies. Press
Menu button to display the setting options on the left side.
Zoom Mode
Press button to select Zoom Mode, and press OK button to select.
(Optional: Fit/Full/Original Size)
Rotate
Press button to select Rotate, and press OK button to select. (Options: Right
90°/Left 90°)
Audio Only
Press button to select Audio Only, and press OK button to select.
Repeat Mode
Press button to select Repeat Mode, and press OK button to select.
(Optional: No Repeat / Repeat Current / Repeat All)
Playback start position
Press button to select Playback start position, and press OK button to select.
Information
Press button to select Information, and press OK button to view.
Play List
Press button to select Play List, and press OK button to display all available
videos.
Audio OnlyPress button to select Audio Only, and press OK button to select.
Audio
Press button to select Audio or All, and press button to select Music.
Information
Press button to select Information, and press OK button to view.
Play List
Press button to select Play List, and press OK button to display all available
videos.
(Optional: Pause/Repeat All/Edit)
Audio Only
Press button to select Audio Only, and press OK button to select.
Image
Press button to select Image or All, and press button to select Picture.
Zoom
Mode
Press button to select Zoom Mode,and press OK button to select. (Optional:
Fit/Original Size)
Repeat Mode
Press button to select Repeat Mode,and press OK button to select. (Optional:
No Repeat/Repeat All)
Interval
Press button to select Ineterval,and press OK button to select. (Optional:
5S/10S/20S)
Information
Press button to select Information,and press OK button to view.
Play List
Press button to select Play List,and press OK button to display all available
Picture.
Policy on defective pixels
Due to the complexity of the technology used in the manufacture of LCD, TFT
and LED screens, it is possible that some of the pixels that make up the
screen may be defective. While it is desirable for all the pixels to function
correctly, this is not always possible from a production perspective. For this
reason, HKC certi es that its LED TV products meet the criteria of admissible
defect described herein and certi es that its LED TV screens are class A.
| Defective pixels | 19″-20″-22″-24″ | 29″-32″ | 39″-40″ | 46″-50″ |
|---|---|---|---|---|
| Bright pixel (max.) | 4 | 4 | 4 | 4 |
| Dark pixel (max.) | 8 | 9 | 14 | 16 |
| Maximum permitted sum of pixels | 5 | 7 | 12 | 12 |
| Double adjacent pixels (max.) | 1 | 1 | 1 | 1 |
If an LED TV screen has dark or bright pixels, this is only considered to be a
fault by HKC when the ranges established herein for an LED panel to be
considered defective are exceeded, thereby allowing HKC to manage the
replacement or warranty of the panel due to a product non-conformance. As
arule and except for limited exceptions, HKC considered an LED TV product to
be faulty when it has a considerable number of permanently bright or dark
pixels. As a reference, an LCD/LED panel has more than 1 million pixels and a
single defective pixel is therefore not considered to constitute a lack of
conformance and cannot be catalogued as a fault, as this circumstance will not
a ect the correct functioning of the product.
Therefore, if an LED screen meets the above
criteria, it cannot be changed or repaired as this is not considered to be a
lack of product conformance and cannot be catalogues as a defect or fault.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>