ACCURATE LOCK HARDWARE DM Mortise Lock with Deadbolt Monitoring Instruction Manual
- June 1, 2024
- ACCURATE LOCK HARDWARE
Table of Contents
ACCURATE LOCK HARDWARE DM Mortise Lock with Deadbolt Monitoring
Product Information
Specifications
- Mortise lock with Deadbolt Monitoring (DM)
- Monitors the full extension of the deadbolt
- SPDT Mechanical Switch
- Voltage: 125 VAC, 30 VDC
- Current: 1 AMP (125 VAC), 0.5 AMP (30 VDC)
- Mainly used as a dry contact monitoring switch
Product Usage Instructions
Wiring Instructions
To wire the deadbolt monitoring system, follow the below diagram:
Wire Connection Details
- Blue Wire – Common
- Orange Wire – Open Loop Secure
- Violet Wire – Closed Loop Secure
Installation Steps
- Ensure power is turned off before installation.
- Connect the wires according to the wiring diagram.
- Secure the connections properly to avoid any loose wiring.
- Test the system to ensure proper functionality.
OPERATING INSTRUCTIONS
Mortise lock with Deadbolt Monitoring (DM).
DM – DEADBOLT MONITORING
Monitors the full extension of the deadbolt.
ELECTRICAL SPECIFICATIONS
SPDT Mechanical Switch
| VOLTAGE | CURRENT |
|---|---|
| 125 VAC | 1 AMP |
| 30 VDC | 0.5 AMP |
NOTE: Mainly used as a dry contact monitoring switch
WIRING DIAGRAM
BLUE WIRE – COMMON
ORANGE WIRE – OPEN LOOP SECURE
VIOLET WIRE – CLOSED LOOP SECURE
1 Annie Pl, Stamford CT 06902
203.348.8865
accuratelockandhardware.com
FAQs (Frequently Asked Questions)
What is the purpose of Deadbolt Monitoring?
Deadbolt Monitoring ensures that the deadbolt is fully extended, providing added security and peace of mind.
Can this product be used with any type of mortise lock?
This product is specifically designed for use with mortise locks equipped with Deadbolt Monitoring functionality.
Is professional installation required for this product?
While professional installation is recommended for optimal performance, users with basic electrical knowledge can also install this product following the provided instructions.