BEGA 50 067.2 Applique Acier Inoxydablew Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 50 067.2 Applique Acier Inoxydablew
Product Information
Product Usage Instructions
Instructions for use
Product Description
Overvoltage protection
Installation
Cleaning and Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50 067.2 Applique Acier Inoxydablew

Product Information

Specifications :

Lamp Module connected wattage : 15.2 W
Luminaire connected wattage : 18.6 W
Rated temperature : 25°C
Ambient temperature: 45°C
Color temperature options: 3000 K, 4000 K
Colour rendering index (CRI): > 90
Luminaire luminous flux : 1542 lm – 1614 lm
Luminaire luminous efficiency : 82.9 lm/W – 86.8 lm/W

Product Usage Instructions

Safety

The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer does not accept liability for damage resulting from improper use or installation. Any modifications to the luminaire should be done by authorized personnel.

Overvoltage Protection

The electronic components in the luminaire are protected against overvoltage per DIN EN 61547. For additional protection against transients, separate overvoltage protection components are recommended. These can be found on the manufacturer’s website at www.bega.com.

Replacement of the LED Module:

The LED module can be replaced by qualified individuals using standard tools. Ensure to disconnect the system, open the luminaire, follow the installation instructions for the LED module, and replace any defective glass before closing the luminaire.

Spares :

Available spare parts include spare glass, an LED power supply unit, LED modules with different color temperatures (3000 K and 4000 K), gasket, and glass components.

FAQ

Q: Can I replace the LED module myself?
- A : Yes, qualified individuals can replace the LED module using standard tools. Ensure to follow the installation instructions provided in the user manual.
Q: Where can I find overvoltage protection components?
- A : Overvoltage protection components can be found on the manufacturer’s website at www.bega.com.

Wall luminaire for indoor use

Instructions for use

Application

Free radiating wall luminaire · indoor luminaire with hand-blown three-ply opal glass for a soft and uniform light distribution.The elongated design of this wall luminaire particularly provides suitability for installation on pillars, columns, and for the front surface of walls, as well as for recesses or profiles.The luminaire may be installed horizontally or vertically

Product Description

Metal luminaire housing, finish Stainless steel
Hand-blown opal glass
The electrical equipment can be hinged 2 mounting holes ø 6mm
Distance apart 230mm Jointing sleeve with cable entry for mains supply cable up toø 14 mm, max. 5 x 1.5
Connecting terminals 2.5
Earth conductor terminal
Complies with flicker requirements in accordance with IEEE 1789, DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V 0/50-60 Hz
DC 176-276 V
During DC operation the LED power is reduced to 15%
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK03
Protection against mechanical impacts < 0.35 joule
– Safety mark
– Conformity mark
Weight : 2.6 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation.If subsequent modifications are made tothe luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.

You can find them on our website at www.bega.com.

BEGA-50-067.2-Applique-Acie-Inoxydablew-fig1

Installation

LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Undo the hexagon socket (wrench size 5) in the locking cap and remove it. The opal glass can now be hinged together with the electrical equipment to the front. Remove the opal glass. Note the position of application of the luminaire »arrow down«. Drill mounting holes into the mounting surface – spacing 230mm and turn in enclosed or suitable fixing screws. For the electrical connection undo the screw connection at the line connector and remove the terminal block. Make earth conductor connection and electrical connection. Make a connection of the phase with the marked, the neutral wire at the N marked and the earth conductor at the PE marked connecting terminal. For digital actuation please use the two connecting terminals DA. If these terminals are not assigned, the luminaire will work with full light output. Bolt together both screw cable glands firmly. Hook the luminaire into the fixing screws and tighten.
Slide opal glass over the lamp and fasten with the locking cap.

Make sure that the gaskets are positioned correctly.

Lamp

Module connected wattage 15.2 W
Luminaire connected wattage 18.6 W
Rated temperature ta=25 °C
Ambient temperature ta max=45 °C

50 067.2K3

Module designation 4x LED-0626/930
Color temperature 3000 K
Color rendering index CRI >90
Module luminous flux 2560 lm
Luminaire luminous flux 1542 lm
Luminaire luminous efficiency 82,9 lm/W

50 067.2K4

Module designation 4x LED-0626/940
Color temperature 4000 K
Color rendering index CRI >90
Module luminous flux 2680 lm
Luminaire luminous flux 1614 lm
Luminaire luminous efficiency 86,8 lm/W

Cleaning and Maintenance

Clean the luminaire regularly with solvent-free
cleansers from dirt.
The defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools. Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
The defective glass must be replaced. Close the luminaire.

Spares