SONOFF IW100 Wifi Smart Wall Socket Switch User Manual
- June 6, 2024
- SonOFF
Table of Contents
SONOFF IW100 Wifi Smart Wall Socket Switch
Use Instructions
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing.
Wiring instruction
IW100
IW101
Ensure correct wiring for live, neutral and earth wire.
Download APP
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press configuration button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
Add the device
Tap”+” and select ·auick Pairing·, then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode· to pair.
- Long press configuration button for 5s until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Long press configuration button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode.
- Tap·+” and select “Compatible Pairing Mode” on APP
For Android system:
EnterWi-Fi password and tap “Nexr. Be patient until pairing completes.
For iOS system:
Select Wi-Fi SSID with ITEAD-** and enter the password 12345678, and then
go back to eWelinkAPP and tap ·Next” Be patient until pairing completes.
Specifications
| Model | IW100TPB/IW101 |
|---|---|
| Input | 120VAC 60Hz |
| Output | 15A |
| Max. power | 1800W |
| Torque | 1.4 N·m |
| Single/Double/ Triple Gang(IW101) | Max. 15A incandescent or CFL load. |
| lamp load(IW101) | Incandescent: 600W/120V CFL: 220W/120V |
| Operating systems | (Android 4.1 & iOS 9.0) or higher |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Material | PC |
| Dimension | 116x70x35mm |
IW101
A cover plate approved in this report or a listed non-metallic flush cover
plate shall be used when installed in the intended manner.
Strippable insulated conductor length: 8mm
Wire gauge: 12AWG
Wire quantity required: 3
Material: copper
For control of incandescent or CFL luminaires only.
To Reduce the Risk of Overheating And Possible Damage To Other Equipment, Do
Not Install To Control A Receptacle, A Motor-Operated Appliance, A Fluorescent
Lighting Fixture, Or A Transformer-Supplied Appliance
Product Introduction
IW101
Features
Turn on/off the devices from anywhere, schedule power on/off and share devices with your family to control.
Factory Reset
Long press pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then the reset is successful. The device enters quick pairingmode (Touch).
__ Please reset the device to factory defaults if you want to change the Wi- Fi network, then reconnect the new network
Common Problems
Q: Why my device stays “Offline·?
A: The newly added device needs 1-2mins to connect the router and Wi-Fi.lf it stays offline for a long time, please check these problems by the blue Wi-Fi indicator status:
-
The blue Wi-Fi indicator quickly flashes once per second, which means that the device failed to connect yourWi-Fi:
1-1 Maybe you enter a wrong Wi-Fi password.
1-2 Maybe there’s too much distance between the device and your router or the environment causes interference, consider getting close to the router. lffailed, please add it again.
1-3 The 5G Wi-Fi network is not supported and it only supports the 2.4GHz wireless network.
1-4 Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again. -
Blue indicator quickly flashes twice per second, which means the device has connected to Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem.
If the network is normal, try to turn off the power and restart the device.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance20cm between the radiator & your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or televisionreception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Scan the QR code to read the voice control instruction for Amazon Echo and
Google Home.
https://www.sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the latest user manual
and help.
Hereby, Shenzhen SonoffTechnologies Co., Ltd. declares that the radio equipment type IW100TPB/IW101 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.sonoff.tech/usermanuals
TX Frequency:
WiFi: 2412-2472MHz
RX Frequency:
WiFi: 2412-2472MHz
Output Power:
21.55d8m(IW1 00TPB); 21.78d8m(IW101)
Shenzhen SonoffTechnologies Co., Ltd.
1001, BLDGB, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000
Documents / Resources
|
SONOFF IW100 Wifi Smart Wall Socket
Switch
[pdf] User Manual
TXIW100, TXIW101, IW100 Wifi Smart Wall Socket Switch, Wifi Smart Wall Socket
Switch, Smart Wall Socket Switch, Wall Socket Switch, Socket Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>