AimeiSen AMX100 LED Projector User Manual

AimeiSen AMX100 LED Projector User Manual

Safety notice

Please read use manual careluly before you use Projector. 1.2.To ensure stable power supply please use national standard power cable standard power cord With grounding
Please use the same power Voltage with the projector marked.
Please not open the projector’othewise factory will not afford warranty senvice
Do not look directly at the projector lens while the machine s working to avoid damage your eyes
To avoid clog of the projector vent please do not cover with cloth,carpet and other materials.
This projector does not have waterproof function, please keep it away from rain,moisture and other tems Containing liquid such as vase cup,etc To avoid electric please keep the projector away from fain or water or moisture And cot off the power supply if do not use this projector for along time 110, Use the originally foam or other unti-shock material to protect projector f you need transport this projector 111 Ifyou find the projectro have problems Please Contact with the supplier,do not repair by yourself 112 o extend the projector life span and protect your eyesight we suggestyou may have a break after 3.4 hours using.
Maintain Indicaton: Leyear warranty from facory,for more warranty information, please contact with supplier (warranty service is ot including the frame, manual, package, and some subjectve idea about the video, sound, image aspecs)

Interface introdution

Operating instructions

Preparation before turning on connect the power adapter
Power on/Power off Press the power switch or the button O
When using the remote control, please align the remotecontrol signal transmitter to the projector’ s infrared signal reception window.

Boot screen Asstart working, ater screen display 2105 seconds of boot screen, then come into the multimedia screen

Insert the USB into the accordingly slot

Insert USB with content to relevant ports . Multimedia supported format

Multimedia supported format

Choose the contents which you need to display
Movie, Music,, Photo and Text.

43 Choose the file which you want to display, press Ml display or stop.

HDMI equipment Connection
HDMI slot could connect to computer and all the. device with HDMI slot. As connected , choose the signal source HDMI

452 3.5mm audio device connect
453 Could connect3 5mm earphone and speaker

Menu settings

5.1 Image menu
Remote control use guide: press”
menu come Pressout© 4/
=” key., then the main
key . come Into the image submenu Press W/A. key , choose the program which Yyou want to adjust Then press’ OK ” key come Into set.

you could choose the picture mode, correlated color temperature . aspect ratio . noise reduction . projection mode . image scaling In the settings.

52 Audi 0 sub-menu

Press =” key and then get the main menu press /P key choose audio submenu. Press W/A ” key choose the items which you want to adjust . Then press. OK * key Come into set

53 Set time sub-menu

press =” key on the remote control, and get the
main menu , then pres /” key, choose time submenu, press “ W/A ” key choose the items which you want to adjust, then press * OK “key come into set.

For projector wireless screen users only

6.1 Firstly, use the infrared remote control or projector buttons to enter the wireless on screen interface from the main interface.

6.2 10 wired connection Use original mobile data cable insert to USB port on projector

Technology features

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates,
uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>