TROY LIGHTING PTL1520 Nette 26 Tall Accent Table Lamp Instruction Manual
- June 1, 2024
- TROY LIGHTING
Table of Contents
TROY LIGHTING PTL1520 Nette 26 Tall Accent Table Lamp
Product Specifications
- Brand: Troy Lighting
- Model: SOLON PTL1520
- Fixture Type: Pendant Light
- Socket Type: Type A1
- Maximum Wattage: 15W
Fixture Installation
- Insert the HARP (B) by squeezing the sides and placing it on the SADDLE of the FIXTURE ASSEMBLY (E).
- Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (E). Ensure not to exceed the recommended wattage of 15W for Type A1 lamps.
- Carefully remove the protective covering from the SHADE (A), place it over the FIXTURE ASSEMBLY (E), and secure it with the FINIAL (D).
- Plug the CORD (F) into a wall outlet. Use the switch on the socket to control the fixture’s on/off function.
Frequently Asked Questions (FAQ):
Q: Can I use a bulb with wattage higher than 15W?
A: No, it is not recommended to exceed the maximum wattage of 15W for this
fixture as it may cause damage.
WARNING / CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
SOLON
PTL1520
Installation Instructions
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A | SHADE | SHD-PTL1520 |
| B | HARP | HRP-8.5 |
| D | FINIAL | FIN-A |
FIXTURE INSTALLATION
- Insert the HARP (B) by squeezing the sides and placing on the SADDLE of the FIXTURE ASSEMBLY (E).
- Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (E). THIS FIXTURE IS RATED FOR 15 WATT TYPE A19 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Carefully remove the protective covering over on the SHADE (A), place the SHADE (A) over the FIXTURE ASSEMBLY (E) and secure with the FINIAL (D).
- Plug the CORD (F) into the wall outlet. Use the switch on the socket to turn the fixture on and off.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>