Berker 6LE007685A Schuko Socket Outlet Installation Guide
- June 12, 2024
- Berker
Table of Contents
Berker 6LE007685A Schuko Socket Outlet
Product Information
The product is a SCHUKO socket outlet with LED orientation light manufactured by Berker GmbH & Co. KG. It is designed to provide electrical power and features an LED light for orientation.
Product Specifications:
- Order Number: 4109 xx xx
- Manufacturer: Berker GmbH & Co. KG
- Model: SCHUKO socket outlet with LED orientation light
- Address: Zum Gunterstal, 66440 Blieskastel, Germany
- Contact Information: Tel.: +49 6842 945 0, Fax: +49 6842 945 4625, Email: [email protected]
- Website: www.berker.com
- Date of Manual: February 2021
- Manual Reference: 6LE007685A
Product Usage Instructions
Assembly of the device (Figure 1)
- Insert insert (7) into the flush-mounted box, ensuring correct positioning, and fasten it with screws or claws.
- Attach the frame (4) of the appropriate switch range and the center plate (1).
- Carefully guide the center plate (1) with the plug contacts (3) into the contact sockets (6) without bending the plug contacts.
Note : The notches (5) in the insert support the mounting device of the center plate via the centring pins (2).
Screw the center plate together with the frame.
Functional Test
To perform a functional test, follow these steps:
- Cover the light sensor (8) over a large area to switch on the LED orientation light.
Note : Proper functional testing is only possible with sufficient ambient darkness.
If you have any questions or need further assistance, please refer to the contact information provided above.
Assembly of the device
-
Put the insert (7) into the flush-mounted box correctly positioned and fastened with screws or claws.
-
Attach frame (4) of the appropriate switch range and the centre plate (1).
-
Carefully guide the centre plate (1) with the plug contacts (3) into the contact sockets (6) without bending the plug contacts.
The notches (5) in the insert support the mounting device of the centre plate via the centering pins (2). -
Screw the centre plate together with the frame.
Functional test
The light sensor (8) must be covered over a large area to switch on the LED
orientation light.
Proper functional testing is only possible with sufficient ambient darkness.
Berker GmbH & Co. KG Zum Gunterstal 66440 Blieskastel/Germany
Tel.: + 49 6842 945 0
Fax : + 49 6842 945 4625
E-Mail : [email protected]
www.berker.com