TROY LIGHTING PTL1128 Pezante 2 Light 30 Tall Accent Table Lamp Owner’s Manual
- June 1, 2024
- TROY LIGHTING
Table of Contents
TROY LIGHTING PTL1128 Pezante 2 Light 30 Tall Accent Table Lamp
Product Information
Specifications
- Brand: Troy Lighting
- Model: SEYLA PTL1128
- Rated for 1 ATT Type A1 lamp
Product Usage Instructions
- Insert the HARP (B) by squeezing the sides and placing it on the SADDLE of the FIXTURE ASSEMBLY (F).
- Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (F). Do not exceed the recommended wattage.
- Carefully remove the protective covering from the SHADE (A), place the SHADE on top of the FIXTURE ASSEMBLY (F), and secure it using the FINIAL (D).
- Plug the CORD (G) into the wall outlet. Use the PULL CHAIN (E) to turn the fixture on and off.
FAQ
- Q: Can I use a bulb with a wattage higher than recommended?
- A: No, do not exceed the recommended wattage to ensure safe operation of the fixture.
- Q: How do I clean the shade?
- A: Gently wipe the shade with a soft, dry cloth to clean. Avoid using harsh chemicals or abrasive materials.
- Q: What type of lamp is compatible with this fixture?
- A: This fixture is rated for 1 ATT Type A1 lamp.
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURES MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
- MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.
- WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE BEFORE INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE
- ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
Installation Instructions
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A | SHADE | SHD-PTL1128 |
| B | HARP | HRP-8 |
| D | FINIAL | FIN-A |
FIXTURE INSTALLATION
-
Insert the HARP (B) by squeezing the sides and placing it on the SADDLE of the FIXTURE ASSEMBLY (F).
-
Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (F). THIS FIXTURE IS RATED FOR 15
WATT TYPE A19 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE -
Carefully remove the protective covering over the SHADE (A), place the SHADE (A) on top of the FIXTURE ASSEMBLY (F) and secure using FINIAL (D).
-
Plug the CORD (G) into the wall outlet. Use the PULL CHAIN (E) to turn the fixture on and off.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>