inateck FD2005 USB3.0 Dual SATA HDD Docking Station with Offline Clone Function Instruction Manual
- June 12, 2024
- inateck
Table of Contents
Instruction Manual
FD2005 USB3.0 Dual SATA HDD Docking Station
With Offline Clone Function
Introduction
This Inateck docking station is a versatile storage device for duplicating hard drives as well as a high capacity USB 3.0 storage. The simple docking design offers quick access and removal of your hard drives for storage or data offline clone. With USB 3.0 the dock ensures high-bandwidth transfer speeds up to 5 Gbps and it also supports full SATA III bandwidth of 6 Gbps. Reverse compatible with USB 2.0 and 1.1, this enclosure is a perfect solution for data transfers or data backup.
Overview
Technical Specifications
Product Name| USB3.0 Dual SATA HDD Docking Station with Offline Clone
Function
---|---
Model Number| Inateck FD2005
Weight| 294
Color| Black
Drive Size| 2.5”/3.5” SATA I/II/III HDD/SSD
Interface| USB3.0 up to 5Gbps
Material| ABS plastic
Hot Plug, Plug & Play| Supported
Licenses| CE, FCC
Dimensions| 158mm length×100mm width×68mm height
Environmental| Storage: -20 to 70 ° C; Operating: 5 to 40 ° C
Operating Systems| Windows XP/7/8/8.1/10, Mac OS 9.0 and higher
Tool free| Yes
Driver| No software or drivers required
Package Contents
FD2005 Docking Station ×1
USB 3.0 Data Cable ×1
DC Power Adapter ×1
Instruction Manual ×1
Troubleshooting/FAQ
Q: Unable to clone.
A: Please check if the capacity of Disk B is larger or equivalent to that of Disk A. Here the capacity means the actual capacity that can be used, instead of the one marked on the product. For example, the actual capacity of a disk marked 500GB might be 480GB only. The actual capacity of disks with the same marked capacity differs if they are produced by different producers. To ensure two disks of the same marked capacity have the same actual capacity, they should
Q: LED indicator turns off during offline offline clone.
A: Hard drive with bad sectors might not be directly cloned. It is advised to repair the bad sectors first or simply replace it with a new hard drive.
Q: I cannot see the capacity remaining in HDD B after the offline clone.
A: If the capacity for HDD B is bigger than HDD A, the capacity remaining in HDD B upon completion of the offline clone should be formulated to a new partition. Go to Control Panel and select Administrative Tools. From there, choose Computer Management. On the left panel, select Disk Management. Windows should now give you the option to initialize the disk.
Q: Why can I not read more than 2TB?
A: The MBR is an old style which has limitations that allowing only partition sizes less than 2TB and only four primary partitions. You need to convert MBR to GPT if you want to make your partition size larger than 2TB.
Q: Can I recover my data in HDD B?
A: All data in HDD B will be deleted once offline clone starts. Before you attempt to clone your hard drive, we highly recommend backing up all your data first.
Q: How come my hard drives are not showing up?
A: Disconnect the FD2005 from your computer. Wait a few moments and then reconnect the device; Connect the FD2005 to another USB port. If the problem still exists, the hard drive might need to be reformatted. If needed open up Disk Management which can initiate / format / partition hard drives. You can also use third-party software such as Fdisk, DM or PQ Magic to do this.
Support
For any inquiries or comments concerning our products, please send an email to
support@inateck.com, and we will respond to you
as soon as possible.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive
2014/30/EU .
A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA F &M
Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden,
United Kingdom, HP16 0AL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang
District, Shenzhen, Guangdong, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>