TROY LIGHTING PTL8128-PBR/SBK Sacramento Wall Sconce Instruction Manual
- October 30, 2023
- TROY LIGHTING
Table of Contents
SACRAMENTO
PTL8128
Installation Instructions
HUDSON VALLEY
LIGHTING G R O U P
Hudson Valley Lighting I Troy Lighting I Mitzi I Corbett Lighting
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A,B,C,D | HARDWARE KIT | HDW-PTL2 |
| G | BULB | BLB-60-G25 |
FIXTURE INSTALLATION
- Using the MOUNTING PLATE (A) mark holes on the wall for the WALL ANCHORS (B), drill holes on the ceiling and push the WALL ANCHORS (B) into the wall.
- Secure the WOOD SCREWS (C) into the each WALL ANCHORS (B).
- Hang the MOUNTING PLATE (A) onto the WOOD SCREWS(C), and Tighten until secure.
- Place the FIXTURE ASSEMBLY (E) onto the MOUNTING PLATE (A) and secure with the SET SCREWS (D)
- Screw the BULB (0) up into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR 60 WATT TYPE G25 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Plug the CORD (F) into the wall outlet. Turn the switch on the cord.
WARNING/CAUTION
-
DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
-
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
-
CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.
WASH HANDS AFTER USE. -
UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
-
PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.