Oiiwak OK14Pro 14 Inch Triple Portable Monitor for Laptop User Guide

Al Alloy Tri-screen Monitor
OK14Pro User Guide

Safety Instruction

1. Please don’t pull the tri-screen out directly while it’s mounted on the laptop. When you want to remove the triple monitor; first extend the monitor frame then remove the monitor frame from the laptop to protect your monitor and laptop.
2. Do not use the triple monitor while the laptop is placed on another laptop stand, or the triple monitor may fall down by gravity.
3. Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
4. Do not use alcohol or ammonia-based cleaners to clean your monitor. We recommend that you use a dry cloth or a slightly damp cloth to clean
5. Avoid placing the monitor on any heating source, water or harmful chemicals, and do not place heavy objects on top of the monitor to avoid damaging it.
6. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
7. When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can power it off for hours.
8. Unplug the monitor during extended periods of non-use.
9. Do not attempt to disassemble or remove parts from the monitor; Any disassemble or modification not performed by an authorized technician will beyond the warranty and can result in damage to the monitor and/or possible exposure to high-voltage electrity, which may lead to serious injury or death

Product list

Inputs and Buttons

Set It Up

1. Unpack the 3-in-1 monitor.
2. Open both screens in the direction shown in Figure 2.
3. Rotate the 2 metal clips on the stand.
4. Pull the pull ring of the OK14 metal expansion screen to pull the stand apart and set it in place, firmly clamping the screen with the stand so that the metal snaps rest on top of the laptop.
5. Lift the stand and extend it to its ends and press and hold the button to adjust the stand. (The stand is embedded in the back of the 3-in-1 monitor to provide additional support for the 3-in-1 monitor.)
6. Using the necessary cables, plug one end of the cable into the 3-in-1 monitor and the other end into your laptop.

Removal

1. Turn the 2 metal clips on the bracket counterclockwise.
2. Stow the bracket
3. Pull the pull ring to remove the monitor
4. Fold the display
5. Follow the direction of the arrow, put the display into the leather case (if you find that the leather case is not attached to the display, please turn the direction and put it in again)

Inputs and Buttons

6.1 Compatibility of Laptops for the Triple Monitor

• Suitable for 13-16 inch laptop
  *M1 & M2 chip MacBook are not supported: MacBook Air (M1 2020), (M2 2022), MacBook Pro 13° (M1 2020), (M2 2022).
• Chromebook laptops are not supported.

6.2 Choose Connecting Cables
To determine which cables you will use, first identify your laptop’s ports according to the figure below or your laptop’s user manual.*Make sure your USB-C port on the laptop is full- functioned port. Please refer to your laptop’s user manual.
6.3 Connection Methods
6.3-1 Two USB-C or Thunderbolt 3/4 Ports
Two Full Functioned USB-C/Thunderbolt-3/4 Ports Connection if there are 2 full-functioned USB-C or 2 Thunderbolt 3/4 ports on the laptop, use two included USB-C cables to connect the laptop to the triple monitors. Notes:
Make sure that the laptop USB-C ports support power & video, and has enough power supply above 5V/2A.
6.3-2 Two USB-C or Thunderbolt 3/4 Ports+USB A
Some USB-C ports may not be able to transmit currents above 5V/2A, please connect an external power supply to better use the monitor. Notes:
Make sure the USB-C of your laptop is a Full-functioned USB-C port (support both video & data transmission).
Make sure 5V/2A or above power can be supported through USB-C port, An external power supply of 5//2A or above is needed for normal use (adjust brightness above 50).
6.3-3 One Full Functioned USB-C and HDMI Port
If there’s one full functioned USB-C port and one HDMI port on the laptop:

1. Use the included full functioned USB-C cable to connect one side of the monitor and the laptop.
2. Meanwhile, use the HDMI cable and an extra power supply (USB-C to USB-A cord) to connect the other side of the monitor and the laptop.
   (Can also use the laptop’s own 5V/2A USB-A port power supply)

Notes:
The HDMI port does not provide power, so the monitor must be plugged into the power supply(5V/2A or Above).
6.3-4 Other Connection Type (Extra Adapter Needed)
If you lack enough HDMI port for connection

1. Find a suitable HDMI adapter for your laptop. You can contact Oiiwak so we will help you find the right connection adapter to use. support@oiiwak.com
2. You need to use 4 cables with an extra adpater for connection
   First, connect one side of your Oiiwak monitor to laptop with a HDMI and a USB AtoUSBC
   Second, connect the HDMI adapter to your laptop.
   Finally, connect the other side of your Oiiwak monitor with another HDMI and USBAtoUSB C

Notes:
If you still can’t find a solution to connect your monitors, pls directly contact us.

Laptop Display Configuration

7.1 WINDOWS

1. Enter the Display Settings interface. (Start >Settings # > System > Display)

2. Identify the Screen/Set Display Direction
   Click and drag the screens to the configuration shown.

3. Start Duplication/Extension Setting
   If you need to set different display modes on the triple monitor, please click 1/2/3 (click the‘identify” Button down the screen to find the corresponding screen).
   Select one of them, and then enter into the “Multiple displays” menu to set.

4. Start Rotation Setting any of the screens are upside down, click the display menu on the screen. Then clickthe “Orientation‘dropdown menu and select “Landscape (flipped)”

5. Start Scaled Ratio Setting
   Please click 1/2/3 screen to increase the zoom, click the dropdown of *
   Change the size of text, apps, and other items” and select’150%” or other value.

7.2 MAC OS

1. Identify the Screen/Display Direction Setting
   Open the “System Preferences SelectDisplay” from the menu.
   Click and drag the screens(Fig.3). Click “Display Settings(Fig.2) to the configuration shown.

2. Start Duplication/Extension Setting
   Click monitorname to set Mirror or Extended display (Fig. 2)

3. Rotation Setting
   If any of the screens are upside down, click the display menu on that screen and select’180°” from the dropdown.

4. Scaled Ratio Setting
   To increase the zoom, click the “Scaled Ratio” Button.

Wave wheel button:
Press the button to the left: Decrease the brightness; In OSD Menu: Decrease the value
Press the button to the right: Increase the brightness; In OSD Menu: Increase the value
Press the button to the down: Open the OSD Menu; In OSD Menu: Access the next menu
Power button:
Long press 2s to power on/off; In OSD Menu: Return to the previous menu

OSD Function Introduction

8.1 Brightness
Brightness:
The adjusting range is from 0 to 100.
Contrast:
The adjusting range is from 0 to 100.
Black Level:
The adjusting range is from 0 to 100.
ECO:
Presets the display settings for various modes (Standard/Game/Movie/Text/FPSRTSModes).
DCR:
Selects ON or OFF to enable or disable the dynamic contrast ratio function. 8.2 Image
Aspect:
Adjusts the aspect ratio. 8.3 Color Temp
Color Temp:
Enables the adjustment of eachRGB color, or select a Warm or Cool preset level.
Red:
The adjusting range is from 0 to 100.
Green:
The adjusting range is from 0 to 100.
Blue:
The adjusting range is from 0 to 100. 8.4 OSD Setting
Language:
Selects OSD language.
The selectionsare as follows, English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Dutch, Japanese, Korean.
OSD Timer:
Sets time-out for monitor settings menu (10-60seconds).
Transparency:
Sets the transparency of monitorsettings menus. 8.5 Reset
Reset:
Selects RESET o revert all settings tothe factory default mode.
HDR MODE:
Enables HDR (High Dynamic Range) whenconnected to a compatible device, with three modes (OFF/Auto/2084). 8.6 MISC
Signal Source:
Contains two signal sources:
Type-C and HDMI.
Low Blue Light:
Decreases the amount of blue light in the display.
Freesync:
Select to On or OFF.

Tech Features

Q&A

Q1: Why doesn’t one of the sareens light up after connecting the cable?

A 1): Due to the insufficient voltage of some laptops(5V/2A or above i required) one screen may not work normally. You can try to use the attached adapted to power cable the screen. 2): Some new models of laptops have two TYPE-C ports, but only one port can output signal in function, which makes them only support one screen display. You can use an additional HDMI cable to start the other monitor screen. 3): Some old models of laptops can't be used because they lack HDMI or Type-Cport to connect with the monitor. If 5o, you can contact OIIWAK(support@oiiwak.com) to recommend you a suitable adapter for connection after connecting with the docking station, in order to use the monitor normally. 4): NOTE: The following laptops DO NOT support our monitor: laptop with M1&M2 chip; Chrome book Series. If you're not sure whether your laptop is suitable for the monitors after reading our manual, pls contact OIIWAK service at support@oiiwak.com

A1): If you are using an HDMI cable to support video transmission, please make sure the power supply is connected. 2):If your laptop is using a normal USB-C port connection that does not support 2-in-1 display and power transmission, you must use a docking station or HDMI port to extend the additional Display Port, and then restart the expansion screen. 3): If you use 2 Full Function USB-C ports to connect the screen and display,make sure your USB-C cable supports video signal transmission.

Q3: Can OIWAK monitor support M1 & M2 series chips?

A: Laptop with M1&M2 chip is not compatible with our triple monitors but we support M1 Pro and M1 Max chips.

Q4: Why my triple monitors can't stay stable and easy to fall down?

A: Pls check whether you have pulled out the bracket holder behind the monitor. You can adjust the angle of the holder to keep the monitor stable.

Q5: The screen image jumps or a ripple pattern appears in the image?

A: Make sure the wire is properly connected between the monitor and the connected device. Tum off or move nearby electronic devices that may cause electrical interference.

Q6: The screen image color does not look right (color block, color cast, etc.)?

A: Check the connecting wires to make sure there are no damaged/bent pins.

QT: Flickering when the screen displays content?

A: The screen flickers need to give priority to whether the power supply of the laptop is sufficient. Priority is given to power the display with a power adapter; if the power supply is normal and the screen still flickers, it is recommended to contact Oiiwak customer service.

Return Instruction

1. If there are problems with product quality, cable missing, incompatible devices, not working properly, etc. Please contact us first!(support@oiiwak.com). We will do our best to provide assistance
2. When returning the product, please make sure that the product is returned without stains on the surface and with complete accessories, thank you for your cooperation.
3. If you receive a product that has obvious signs of having been opened or used, please contact Amazon Customer Service or Oiiwak.
4. Sorry for not giving you a good shopping experience, welcome to buy next time!

support@oiiwak.com

Documents / Resources

| Oiiwak OK14Pro 14 Inch Triple Portable Monitor for Laptop [pdf] User Guide
OK14Pro, OK14Pro 14 Inch Triple Portable Monitor for Laptop, 14 Inch Triple Portable Monitor for Laptop, Triple Portable Monitor for Laptop, Portable Monitor for Laptop, Monitor for Laptop, Laptop
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>