faytech FT07HDKTMCAPHBOB 7 Inch Open Frame Touch Monitor User Manual
- June 6, 2024
- faytech
Table of Contents
faytech FT07HDKTMCAPHBOB 7 Inch Open Frame Touch Monitor
Not to print out the detailed manual saves 200ml water, 2g Co2 and 2g wood each page.
A detailed instruction manual can be found online on the website www.faytech.com. We recommend reading the entire manual before initial operation. Additionally, related drivers can be downloaded from the website, at www.faytech.com/downloads
WARRANTY
If your device has a defect within the warranty period, please contact faytech directly. The warranty period is 24 months.
TROUBLESHOOTING
If there are any unclarities or problems in the usage of the product, please refer to the detailed instruction manual first (on www.faytech.com ). If this does not help, please contact us directly.
CONTACT/RMA-SERVICE
faytech AG – Technical Support: +49 5542 30374 30
faytech Tech. Co., Ltd. Support: +86 755 8958 0612
Support E-Mail: support@faytech.com
Manufacturer-Website: www.faytech.com
If there is a defect, you can request an RMA number (Return
Merchandise Authorization) at
support@faytech.com. For further information
please check the detailed instruction manual.
GENERAL WARNING
Avoid all contact with dirt, oil, dust or water. Never open the unit. If you notice a burnt smell or hear the device making unusual sounds, please disconnect it immediately from the power source. To clean the unit, please turn off the device first, then clean it very gently with a dry, soft cloth.
CE, ROHS & FCC
Hereby declares faytech that the product complies with EMC Directive 2014/30/EU, LVD directive 2014/35/EU, RoHS Directive 2011/65/EU and FCC part 15. The complete text of the Declaration of Conformity (DoC) is available at: www.faytech.com/downloads/.
COMPONENTS
- 7″ Open Frame Touch Monitor.
-
11.6 – 21.5″ Open Frame Touch Monitor.
-
32 – 55″ Open Frame Touch Monitor.
External Connectors:
- USB-Touch connector
- Serial connector – to control the OSD menu
- 12V DC-In
- Ear-Out
- VGA
- DVI-D
- HDMI
- 24V DC-In (32″+)
Buttons:
- Input: Select the desired Source of the video signal
- Menu: Open up the OSD menu
- B+/→: Increase the Brightness/Navigate to the right (menu)
- B- /←: Decrease the Brightness/Navigate to the left (menu)
- VOL+/↑: Increase the Volume/Navigate up (menu)
- VOL- /↓: Degrease the Volume/Navigate down (menu)
- Power: Turn the device on/off
Commissioning and Installation
To start, simply connect your faytech Touch monitor to the included AC adaptor or use an equivalent power 12V DC source. For all power information see individual product label.
Troubleshooting
If you encounter problems or ambiguities during the usage, please first refer to the detailed instruction manual (available under www.faytech.com). In case you are unable to resolve the issue this way please contact us directly.
Accessories
- 100-240V ACDC switching power supply
- USB-Touch cable
- HDMI cable
References
- Industrial touch panel pc | Touch Monitors and Pcs | faytech
- Downloads | 3D Models | faytech
- Downloads | 3D Models | faytech