NOVY 70011 Lighting Shelf User Manual
- June 3, 2024
- NOVY
Table of Contents
NOVY 70011 Lighting Shelf
This product contains an ambient light source of energy efficiency class G
This product contains a functional light source of energy efficiency class F
Light source (LED only) and driver can only be replaced by a recognized installer.
Provide an on-off switch at mains power supply.
Gesture Control (GC)
The Gesture control (GC) is operated by a sensor. The sensor is located in the centre of the light object and is indicated by an icon. The sensor has a range of 15cm under the Novy Shelf (see the grey shaded area in the image below).
All movements lower than 15cm are not responded to by the sensor.
Switching the lighting on and off
The light can be activated in 2 ways:
- By moving your hand from left to right or right to left underneath the sensor.
- By holding your hand underneath the sensor for more than 1 second.
Changing the light balance from top to bottom
Balance more towards the top
- Holding your hand closer to the sensor will move the light towards the top of the Novy Shelf.
Balance more towards the bottom
- By holding your hand further from the sensor (but no further than 15cm!), the light will move towards the bottom of the Novy Shelf.
Changing the colour at the top
By holding your hand close to the sensor for 2 seconds, the light on the top side of the Novy Shelf will change to a preset colour.
Setting the colour
If you want to change the colour of the mood setting, first go to mood mode in the preset colour (see previous step). Next, hold your hand under the sensor for another 4 seconds until the coloured light pulses. You are now in the colour setting mode.
By moving your hand under the sensor, you “scroll” through the available colours. You can scroll forward and backward by moving the hand either from left to right or right to left underneath the sensor. When you have reached the desired colour, remove your hand. After 4 seconds, the pulsing will stop and the chosen colour will be set as the default colour. The chosen colour will be saved.
Service
If there is a default you can contact your (kitchen) supplier and/or our Novy Customer Care Service.
- Belgium Tel. : +32 (0)56 36 51 02
- France Tel. : +33 (0)3 20 94 06 62
- Germany Tel.: +49 (0)511 54 20 771
- The Netherlands Tel.: +31 (0)88 011 91 10
- Unite Kingdom Tel.: +44 (0) 207 866 2493
- For all other countries: your local installer or
- Novy in Belgium: +32 (0)56 36 51 02
To be able to deal with the fault promptly and efficiently it is necessary that the Novy Customer Care Service knows which type of appliance you have.
Installation
Before starting the installation, make sure that the voltage on the wiring to be used is switched off!
- Determine the preferred position of the Novy Shelf
- Mark the preferred position of the Novy Shelf on the wall and determine the height of the drill holes. Place the wall bracket against the wall and mark 1 drill hole.
- Drill the first hole.
- Draw/drill the wall bracket
- Attach the wall bracket with 1 bolt and mark the remaining drill holes (level).
- Drill the remaining drill holes.
- Mounting the wall bracket
Mount the wall bracket. When tightening the bolts, make sure the bracket remains flush.
In case of crooked walls (see wall bracket), resistance may occur between the wall and the shelf. Make sure the wall bracket does not warp against a hollow or convex wall. If it does, first fill the spaces behind the bracket using shims.
Wall socket above the Novy Shelf Wall socket underneath the Novy Shelf
-
Wiring top/bottom
If the wall socket is not located underneath the Novy Shelf, make sure that when hooking in, the wiring leaves the Shelf on the side of the wall socket (depending on location of the wall socket). If the wiring/wall socket is next to the hanging bracket, connect the wiring before hooking in the Novy Shelf. -
Mounting the Novy Shelf
- Hang the shelf with the wiring in the wall bracket at a 30˚ angle as indicated in the drawing.
- Before lowering the Novy Shelf into a horizontal position, dispose of the excess power cord in the cavity at the back of the shelf. Once the Novy Shelf hooks into the bracket and the wiring is concealed, lower the shelf until it hangs horizontally.
-
Conceal wiring
If the wall socket is located above or below the Novy Shelf, the wiring can be concealed at the top/bottom using the special recess at the back/ top of the Novy Shelf if required.
-
Connect the wiring
Connect the wiring of the Novy Shelf to the wall socket. If the power source is a power plug socket, first mount a plug to the Novy Shelf’s wiring. Make sure you have enough length to reach the power plug socket. -
Turn the power on
CAUTION:** When switching on, the sensor will automatically calibrate
itself.
**
Make sure there are no objects less than 15cm below the Novy Shelf. This may interfere with the calibration.
NOTICE! The Novy Shelf is switched on and off by hand signals.
If desired, the Novy Shelf can also be con-nected to a light switch. If a
switch is used, the lighting will not respond to hand signals when it is not
powered.
External factors affecting operation
The Novy products operate with infrared sensors. If there is an extraordinary
amount of infrared light, in the immediate vicinity of the fixture, this may
adversely affect operation:
- Bright sunlight reflecting off shiny objects.
- Direct radiation from halogen spotlights or incandescent lamps at the underside of the fixture.
In case of excessive amounts of steam, the light fitting will possibly recognise this as a hand signal!
Cleaning
The fixture can be cleaned using simple soapy water. Do not use excess water.
For removing stub-born stains, we recommend using a mild degreaser. Preferably
use a microfibre cloth.
CAUTION: Cleaning the black sensor film should be kept to a minimum to avoid scratch formation. Scratches on the foil can negatively affect the operation of the sensors. Clean film with a microfibre cloth at all times.
NOVY nv reserves the right at any time and without reservation to change the structure and the prices of its products.
NOVY nv
Noordlaan 6
B – 8520 KUURNE
Tel. 056/36.51.00
Fax 056/35.32.51
novy@novy.com
www.novy.com
België/Belgique: Tel. +32 (0)56/36.51.00
France: Tél: 0320.940662
Deutschland und Österreich: Tel: +49 (0)511.54.20.771 Nederland:
Tel.: +31 (0)88-0119110
United Kingdom: +44 (0)207 866 2493
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>