HDX HD184872-DDCPS Dual Duty 5 Shelf Storage Unit User Guide

: June 9, 2024
: HDX

Table of Contents

Note
Caution Warnings
Specifications
Helpful Hints
Assembly
[1)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

184872-DDCPS Dual Duty 5 Shelf Storage Unit
User Guide HDX HD184872-DDCPS Dual Duty 5 Shelf Storage
Unit

THANK YOU
We appreciate the trust and confidence you have placed in HDX through the purchase of this Storage Unit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products avai able for your home improvement needs.
Thank you for choosing HD!

Note

Please dispose of loose, round plastic pieces and plastic post covers. These are used to separate the shelves and the posts for shipping purposes.

Caution Warnings

Two adults are recommended for ease of assembly. Use care when handling.
Do not allow children to climb or play in or around the shelves.
Assembly recommended on a soft surface, such as carpet, to avoid scratching flooring finish.
Top 3 shelves hold 350 lbs per shelf when evenly distributed.
Bottom 2 shelves hold 650 lbs per shelf when evenly distributed.

Specifications

Product width	48 in.
Product depth	18 in.
Product height	72 in.

NOTE:Please dispose of loose, round plastic pieces and plastic post covers. These are used to separate the shelves and the posts for shipping purposes.

Helpful Hints

Carefully read all instructions and caution warnings before beginning assembly.
Determine shelving heights prior to assembly to avoid dismantling for adjustment.
When placing the plastic tapered sleeves onto the posts (step 2-ii), slide tapered sleeves up or down on the post until you feel it “snap” into the lines or grooves of the post.

Accessory Parts List & Quick Guide

a) (40) plastic tapered sleeves (2) replacements

b) (8) posts(wilh 4 thn,aded post jointers pre-installed in posts, 4 foot levelers pre-installed in bottom of posts)

C)

(3) Top shelves

d)

(2) Bottom shelves HDX HD184872-DDCPS Dual Duty 5 Shelf Storage Unit -
Figure 5

Assembly

Step 1: Post Assembly
i. The top post section has a plastic endcap on one end and the bottom post has a foot leveler attached. Threaded post jointers are pre-installed for your convenience. Screw the posts (1 long & short) tightly together. (See Diagram

1)![HDX HD184872-DDCPS Dual Duty 5 Shelf Storage Unit - Figure

6](https://manuals.plus/wp-content/uploads/2023/01/HDX-HD184872-DDCPS-Dual- Duty-5-Shelf-Storage-Unit-Figure-6.jpg)

Step 3: Additional Shelves Assembly (See Diagram #4)
i. Locate the desired position of the next lowest bottom shelf (D) and insert the tapered sleeves into the posts
i.Locate the desired position of the next lowest bottom shelf (D) and insert the tapered sleeves into the posts
ii. Slide the shelf down from the top of the posts and onto the tapered sleeves. Push down on each shelf corner, ensuring that the shelf is in the fully locked position.
iii Repeat for the remaining top shelves (C).
iii Repeat for the remaining top shelves (C). HDX HD184872-DDCPS Dual Duty 5
Shelf Storage Unit - Figure 7

Step 4: Adjust the foot levelers in or out at the bottom of the posts to attain proper leveling. (See Diagram #5) HDX HD184872-DDCPS Dual Duty 5
Shelf Storage Unit - Figure 8

Step 2: Bottom Shelf Assembly
iii Place bottom shelf (D) on its side and slide each post with tapered sleeves through the bottom of the shelf until snug.
i. Locate the desired position of the bottom shelf.
ii. Insert eight plastic tapered sleeves into the appropriate post groove, one in each post. Ensure tapered end is up. See arrow on lock. (See Diagram #2)
iii Place bottom shelf (D) on its side and slide each post with tapered sleeves through the bottom of the shelf until snug.
iv. After all posts are in place, position the unit in the upright position.
v. Push down on each corner of the shelf, ensuring that the shelf is in the fully locked position.

HDX HD184872-DDCPS Dual Duty 5 Shelf Storage Unit - Figure
9

NOTE: The tapered sleeves must be at the same height for each pole to ensure the shelf sits on the sleeves levelly.
NOTE: The tapered sleeves must be at the same height for each pole to ensure the shelf sits on the sleeves levelly.
NOTE: The post has a groove with a double line marking. It can help to identify the height of the tapered sleeve in each post.
NOTE: The post has a groove with a double line marking. It can help to identify the height of the tapered sleeve in each post. HDX HD184872-DDCPS
Dual Duty 5 Shelf Storage Unit - Figure 10