QFX PBX-61162 Portable Speaker User Manual

QFX PBX-61162 Portable Speaker User Manual

WARNING!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.

PBX-61162 BATTERY

The PBX-61162 is a lithium battery powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize the battery’s lifespan .Once the power cord is connected to a power source and Power Switch is set to ON/OFF, it will automatically begin charging ( 1-2 hours to fully charge the lithium battery ) Even if the battery power is low, it will power on when connected to a power source.
The Battery Indicator icon (on right top side of led display) always red when charging to full situation. Upon completion of the charging, Please disconnect the power cable. With standard usage, a fully charged battery can play for about 2-3hours. Battery can be recharged about 300 times in its lifetime. When not in use, the speaker should always be set OFF to prevent the unit from draining the battery.
When the unit is not used for prolonged periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 60 days.

PBX-61162 BLUETOOTH

Bluetooth Mode:Open the bluetooth of phone.Find the bluetooth name of the unit called “QFX PBX-61162” to connect. After a successful match.you can play the music from speaker. You won’t need reconnect the Bluetooth when switching mode.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including that may cause undesired operation.
Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limtts are designed to provide reasonable protection against hannful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

PBX-61162 REAR PANEL

1. Power Switch: ON/OFF.

2. Light Switch: ON/OFF

3. Power Supply: AC100-240V 50/60Hz

4. Master volume Knob: Adjust from Min to Max

5. Bass Knob: Adjust from Min to Max

6. Treble Knob : Adjust from Min to Max

7. Microphone Volume Knob: Adjust from Min to Max

8. Mode Button: Toggle between AUX, USB, TF, FM, BT Cl
   Previous Track Button: Select previous track
   Play/Pause Button Cl
   Next Track Button: Select next track REPEAT MIC PRIOR : Press to select /exit Microphone Priority

9. 5 Band EQ

10. Microphone Input

11. Guitar Input

12. AUX IN

13. TF card slot

14.  USB slot

PBX-61162 DISPLAY SYSTEM SETTINGS

1. lnput Mode: The LED display screen will display the information of input mode for USBITF/BT/AUX/FM. When a USB flash drive I TF Card is inserted
   into the USBITF input, the unit will automatically switch to USBITF mode and begin playing .mp3 audio files from the USB flash drive I TF Card.

2. Track Number: The track number currently playing from the USBITF will display.

3. FM Mode: All FM channels display here. Short press “play/pause” button for auto scan all channels.

PBX-61162 REMOTE CONTROL

1. STANDBY: Make the unit to be standby mode.
2. .lnput Mode Button: Toggle between USB,TF,FM,AUX,BT
3. Mute: Mute the track
4. PLAY/PAUSE
5. Previous Track: Select previous channel
6. Next Track: Select next channel.
7. EQ: Select EQ mode.
8. VOL-: Reduce the master volume
9. VOL +: Increase the master volume
10. REP: Repeat the playing track.
11. Scan Channel in FM Mode
12. 21 . KEY Number for selecting the certain track for USB flash drive orTF card.

PBX-61162TWS CONNECTION

1. TWS connection: TWS Connection is only for two speakers, can not support quantity over 2 PCS.
2. Turn on the Speakers , press the MODE button to switch to BLUETOOTH mode, and the word “BLUE” on the LED screen will flash.
3. At the first time, please press the Play/Pause (TWS) button of one of unit for 3 seconds. Then two speakers will connect together.
4. Connect the phone: Open the phone Bluetooth settings, Search and Connect the main device Bluetooth Name ‘QFX PBX-61162 ‘.
5. Select music from phone and enjoy TWS playing in pairs with two Speakers.
6. Exit TWS: Long press the Play/Pause (TWS) button for 3 seconds to exit the TWS function

STEP 1 PASO 1 ETAPE1

Push the Mode Button on both SP,eakers until speakers are in Bluetooth Mode. Screen will display the word “Blue”
MODE Presione el baton de mode en ambos altavoces hasta las altavoces estan eri Bluetooth Medo. La pantalla mostrara la palabra “Blue”

STEP 2 PASO 2 ETAPE 2

When both ~ers are in Bluetooth mode, push and hold the lWS button for 3 seconds. You will hear a~-Next time~ out both ~ers in Bluetooth mode at the same time, speakers will connect automatically.

STEP 3 PASO 3 ETAPE 3

On your device, turn your Bluetooth settings “ON”, you will then select “QFXPBX-61162”. Enjoy TWS (True Wireless Stereo) sound from your phone via Bluetooth!
En su dispositivo, active la oonfi~uraci6n de Bluetooth, luego seleccionara “QFX PBX-61162”. DisfrutalWS (True Wireless Stereo) sonido desde su telefono a traves de Bluetooth!
Sur vo1re appareil, activez vos pararnetres Bluetooth, vous selectionnerez ensuite «QFX PBX-61162». Profitez de 1WS
(True Wireless Stereo) son de vo1re telephone via Bluetooth!

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>