Govee H6146 LED Strip Lights User Manual
- June 5, 2024
- Govee
Table of Contents
Gove H6146 LED Strip Lights
**What You Get
**
SPECIFICATION
Installing Your Strip Light
- Preparation Before Instaling
- Unpack the box and dheck all items listed in the packing list
- Connect one end of the control box to the strip via 3-pin connector and the other end to the adapter
- Power on the strip light and check whether it lights up.
- installing Steps
- Wipe the surface to keep it clean and dry
- Peel off the protective film onthe tape, stick the strip on and press over it firmly;
- Reinforce via dlips around Corners
- Peel off the protective film on the control box and stick it on;
- Power on the strip light and start to use it.
**Controlling with the Control Box
**
Controlling with the Remote Control
Downloading the Govee Home App
Download the Govee Home app from App Store (OS devices) or Google Play
(Android devices).
Notice: You need a smartphone running iOS 9.3 (or above) or Android 4.4 (or
above).
Connecting the Strip Light to the App
- Turn on Bluetooth in your mobile phone:
- Open Govee Home app and tap”” icon in the top right corner
- Select “H6146” in the device list:
- Folow on-screen instructions to complete connection.
Troubleshooting
- The adhesive tape is not strong enough.
- Make sure the instalation surface is dean and dry.
- Firmly press over the strip after sticking.
- Reinforce the installation via more cips and tapes
- Cannot connect to Bluetooth.
- Do not skip Bluetooth connection in the app.
- Make sure Bluetooth in your mobile phone has been turmed on.
- It may be caused by incompatibility between the phone system and the app. Please change a mobile phone and connect again.
- Re-power on the strip and re-tum on Bluetooth in your phone to try again.
- e.Keep the distance between the strip and the phone less than 1m/3.28ft while connecting.
- f. Keep obstructions between the strip and the phone as few as possible.
- The strip doesnt matdh the same calor./Some lamp beads don’t light up. Please contact Govee support team in time for return. Cannot sync to the music beat.
- Please keep the control box close to the sound source.
- Clean up the sound picking hole on the control box.
- The straight doesnt work
- You should snap the convex part on the end of strip light into the buckle connecting with control box.
- Pull out every connective part of the strip light and firmly reconnect them.
- Tap On/Off button on the control box or app to dheck whether it is strip quality issue.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>