NOVY 7530 Island Mounted Phantom Cable User Manual

7530 Island Mounted Phantom Cable
User Manual

Novy Phantom Cable 7530
Novy Phantom Frame 7540

INSTRUCTIONS FOR SAFETY AND USE

Further information on Novy products, accessories and services may be found on the internet: www.novy.com 
These are the directions for use for the appliance as shown on the front. The installation instructions are in a separate booklet supplied with the appliance.
These directions for use make use of a number of symbols. The meanings of the symbols are shown below.

Observe this instruction in order to prevent injury and damage to property.

Technical safety instructions
− This appliance complies with the applicable safety instructions.
However, improper use may cause personal injury or damage to the appliance.
− Read the directions for use and the installation instructions before installing and using this appliance. You will find important information here for the assembly and use of the appliance.
− Safety is guaranteed only with expert installation in accordance with the installation manual. The installing technician is responsible for proper operation at the installation location.
− The appliance is intended exclusively for household use (preparation of food) and excludes all other domestic, commercial or industrial use. Do not use the appliance outside.
− Check the condition of the appliance and the installation fittings as soon as you remove them from the packaging. Remove the appliance from the packaging with care. Do
not use sharp knives to open the packaging.
− Do not install the appliance if it is damaged, and in that case inform Novy.
− Keep good care of this manual and pass it on to any person who may use the appliance after you.
− Novy is not liable for damage resulting from incorrect assembly, incorrect connection, incorrect use or incorrect operation.
− Do not touch live components.
− Do not convert or alter the appliance.
− Remove labels and stickers on the appliance with tips for use or installation. The type sticker is to be found behind the grease filter in the appliance. Do not remove it.
Safety instructions with children in the house
− The appliance’s packaging forms a hazard for children. Do not let children play with the packaging materials. Keep packaging materials away from children.
− Children from the age of 8 years and older may use this appliance only under the supervision of a person who is responsible for their safety, or if they have been taught how to use this piece of equipment under safe circumstances.
− Keep an eye on children in order to ensure that they do not play with the appliance.
− Children younger than 8 years should be kept away from the appliance and the connection cable.
− Cleaning and maintenance of the appliance may not be carried out by children.
− The appliance’s lighting is extremely bright and may damage the eyes. In particular, ensure that babies do not look directly into the lights.
− Ensure that batteries are stored out of children’s reach. Do not allow children to replace batteries without supervision.
Safety instructions when using the appliance
− People with restricted physical, sensory or intellectual capacities, or people lacking in knowledge or experience, may use this appliance only under the supervision of a
person who is responsible for their safety, or if they have been taught how to use this piece of equipment under safe circumstances.
− Flambéing under the appliance is not allowed under any circumstances.
− Whenever you are frying, roasting, grilling or deep-frying, always stay close. Overheated oil and fat can rapidly catch alight and as a result damage the extractor hood.
− Clean the grease filter regularly in accordance with the instructions in these directions for use. Failure to follow the cleaning instructions will lead to grease deposits in
the filter with a resultant fire hazard.
− Never use the appliance without the grease filters in order to prevent dirt and grease penetrating the appliance, which may impact the operation and functioning over time.
− In the event of fire, always switch the appliance off.
− Never douse burning fats with water, but cover the pan with a suitable lid or fire blanket.
− Note that certain parts of the appliance within reach of the hands may become hot while cooking.
− Gas burners can build up a lot of heat while operating.
Make sure that this heat cannot increase too much in the cooker hood. The cooker hood installed above the gas burners may become damaged or catch fire.
• Only operate the gas burners with cookware on them.
• Turn off the gas burner when you remove the cookware from the gas.
• When using several gas  burners atthe same time, set the cooker hood to position 2 or higher.
• Never operate large  burners of more than 5 kW with the highest flame for longer than 15 minutes, e.g. a wok.
− Switch on the appliance a few minutes before starting to cook for effective extraction of the cooking vapours.
− Make use of the delay position if the appliance has one. The instructions for the delay position are set out in these directions for use.
− Avoid all draughts above the cooking surface.
− Position your cooking utensils in such a way that ris ing vapour is directed under the extraction surface of the hood.
− Cooking with induction: set the intensity of the ap pliance and hob as low as possible in order to limit excess vapour.
− If the appliance has a bottom panel, ensure that it is always properly closed. Take care that it is properly inserted into the clamps and cannot come free. When opening the
bottom panel, do not put your hands on the side of the hinges in order to prevent being crushed.
− Do not place objects on top of the appliance, as these may fall and cause a dangerous situation.
− If a suspension cable is damaged, the cooker hood may no longer be used. The suspension cables may only be replaced by a qualified professional.
− The suspension cables may be damaged if they are overloaded. Do not let the cooker hood swing. Do not pull on the cables.
− Objects placed on the appliance can overload the fastening elements. The appliance can then go to fall down.
Do not place any objects on the appliance.
Air supply
However large the kitchen or the room with open kitchen is, only so much air can be extracted from the room as is supplied. Too little air supply could result in a yield loss
of 50% and more.
[!] If the extraction is used at the same time as a combustion system (for example heaters fired by gas, oil, wood or coal, hot water boilers using gas, gas hobs and gas ovens),
combustion gases may be sucked back in and lead to poisoning.
A combustion system uses air from the room as combustion air. Combustion gases arise as a result, which are removed to the outside by an extraction system. The appliance sucks in air from the kitchen and adjacent rooms. Negative pressure occurs if the air supply is inadequate. The toxic gases are then sucked back from the chimney or  xtraction duct into the room.
With simultaneous use of the appliance and combustion appliances in the same room, the negative pressure may not exceed 4 Pa (=0.04 mBar). Negative pressure can be prevented by allowing sufficient air into the room through openings that cannot be closed (for example through windows or doors, in combination with a ventilation cabinet in the wall).
Have an expert assess the overall ventilation system in your home for a proposal on suitable measures in the area of air supply.
When using the appliance with an internal or external motor (unit) with air extraction to the outside, there must be adequate air supply in the room where the appliance has been installed / is positioned, so that fresh air can flow in.
Fresh air can be provided by tilting a window, opening a door or installing an inlet grille.
With an appliance with recirculation, there must be a minimum of ventilation in the room where the appliance has been installed / is positioned. Ventilation can be provided  by the overall ventilation in the home or by tilting a   window or opening adoor.
Certain appliances are fitted with a connection for a window contact switch (see the technical specifications for your appliance). If the appliance is to operate at the same time as a heating appliance that needs air from the room, and if the required supply can only take place through a single open window, there is the option of connecting the appliance to a window contact switch (not included). This ensures that the appliance operates only when the window is open. If the window is closed, the fan cannot be switched on.
Contact your technician for the correct accessories for your appliance.
Precautionary measures against damage
− The correct installation method is described in the installation instructions. Read these instructions through carefully.
− The installation and electrical connection of the appliance should be left to a recognised expert.
− NOVY cannot accept liability for any damage arising from incorrect installation or connection.
− Check the distance between the hob and the appliance.
The minimum and maximum heights are shown in the installation instructions.
Precautionary measures in the event of a fault
− If a fault occurs, switch off the appliance and disconnect the power supply.
− Repairs should be carried out only by specialized personnel. Do not under any circumstances open the equipment yourself. Contact the Novy service department.

ENVIRONMENTAL PROTECTION

Tips for saving energy
The new appliance is exceptionally efficient and economical with energy. Some tips follow below for making your appliance even more energy-efficient.
− Switch the appliance on at the lowest speed when you start cooking to adjust the relative humidity and eliminate cooking odours.
− Only use the highest speed when absolutely necessary.
− Only increase the speed of the appliance when the quantity of vapour so requires.
− Keep the appliance filter/filters clean to optimise grease and odour filtering efficiency.
− Switch to higher power in good time if much vapour is released. This is more efficient than using the appliance for a long time, and catching vapour already spread in the kitchen.
− Do not allow the appliance to unnecessarily ventilate after cooking.
− Switch the lighting off when leaving the kitchen or if the kitchen is already light enough.
− Ensure adequate air supply in the room, so that the appliance can operate efficiently and economically.
− Put lids on the pots to reduce cooking vapours and condensation.
Recycling the transport packaging and the old appliance
This appliance is protected against damage during transport by packaging. The materials used are not harmful to the environment and are suitable for recycling. Ensure  environmentally-friendly disposal of the packaging.Your appliance also contains many materials that can be recycled.
For this reason, used appliances should be separated from other waste. Recycling of old appliances arranged by your manufacturer will in this way be carried out under the best circumstances. For recycling your appliance, we refer you to the recent European guidelines in force concerning electrical and electronic waste. Ask your municipality or
your salesperson about the closest collection point for your old appliance.
Keep old appliances out of the reach of children.
Recycling batteries
Do not put batteries into the standard household refuse. Ask your municipality or your salesperson about the closest battery collection point. Keep batteries out of the reach of children.

CONTROLS AND FUNCTIONS

2.1 Operating the device
You can operate the cooker hood with the supplied remote control or via the Novy mobile apllication (Novy connect application). Read more about the Novy mobile application in paragraph 2.6.
Operation via remote control:
The remote control for hood is preinstalled and ready for use.

1. Lighting cooking mode on/off
2. Increase speed levels
3. Decrease speed levels
4. Switch on/off
5. Mood mode lighting on/off

Information on the display:

A White indicator leds speed level 1, 2, 3
B White indicator leds Power position
C Orange indicator led replacement recirculation filter
D Green indicator led cleaning grease filter
2.2 Turning the extraction on and off
Switch on – switch off extraction
To switch the motor on push button . The hood will always resume the level it was previously switched off in (cooking mode light and/ or motor).
− Three white indicator leds A indicate speed level position one to three.
− The fourth white indication led B indicates the Power position. Power position is only used in case of strong development of odour, smoke or vapour. Taking into account
the large air volume in this position, usage should be kept to a minimum.
− Power mode automatically reverts to speed three after 6 minutes.
− The illuminated indication led shows the current motor speed.
Motor speed
In order to increase the speed of the motor, press the button. In order to decrease the speed, press the button.
The motor speed can be set to 4 speeds. You can select the required position depending on the vapour production while cooking.
Switching extraction off with delay mode
To set delay mode press button once.
The first white engine speed LED flashes. The engine continues to run for 30 minutes in post-ventilation mode. After this time, the motor will switch off. The lighting will
remain on in the cooking mode. Make use of the delay time of 30 minutes so that the cooking odours can be absorbed well in the monoblock filter.
Switching extraction off without delay mode
Press button twice.
Auto-Stop
To prevent the cooker hood from being left on, the motor is automatically switched off after 3 hours (only if the control has not been changed during the 3 hours).
The lighting will remain on in mood mode.
** The motor has a thermal switch that switches the motor off with overheating. After cooling the motor will switch on again. Determining the cause of overheating is required. This can be caused for example by a pan fire, the impeller motor being blocked or an object getting in the exhaust opening and causing it to be partly or fully blocked.
2.3 Lighting
With respect to the lighting you can choose between the cooking mode and the mood mode. The light workt independent of the motor.
Cooking mode
The cooking mode provides optimum lighting for cooking. Press key or key to switch the cooking mode on or off.
Cooking mode light intensity
When the cooking mode is active, you can dim or intensify the light by pressing . Release key when the required light intensity has been reached.
** You cannot fully dim the light of the cooking mode, because then there will not be sufficient light to cook.
Change the colour temperature in the cooking mode
You can change the colour temperature into cold light by simultaneously pressing keys and – for 4 seconds. Release both keys when the required colour temperature has been reached.
You can change the colour temperature into warm light by simultaneously pressing keys and + for 4 seconds. Release both keys when the required colour temperature has been reached.
After having switched off the cooking mode, the last set value will always be remembered. In this way your prefer- ence will be used every time when switching on the hood.
Mood mode
The mood mode provides optimum lighting for creating a nice atmosphere.
The lighting in mood mode includes the 4 corner lights and the uplight lighting on top of the cooker hood.
To switch the ambience mode on or off, press button 5.
** The intensity of the 4 corner spots and the uplight lighting can be adjusted independently via the Novy mobile application (Novy Connect app).
2.4 Remote control
The remote control for hood is preinstalled and ready for use.
Change the code on the remote control
If the set code disrupts other transmitters, another code can be selected using the remote control. There are 10 different codes.
Determine the code used**
On the remote control, briefly press the buttons and at the same time. The lamp on the remote control flashes as many times as the selected code (there are 10 code options in total).

Change the code
− Press (approx. 3 seconds) simultaneously on the buttons and  of the remote control until the green LED on the remote control starts flashing .
− The green LED on the remote control flashes as many times as the new set code (= old code + 1). If another code is desired repeat this step again (1x flashing is code 1, 2x flashing is code 2 etc. There are 10 codes in total).
− Link the remote control to the cooker hood using the pairing button. The black pairing button is located at the top of the cooker hood on the side of the power cord. Press the black pairing button and the pairing mode is then active for 3 minutes.
− Within 3 minutes, press the button on the remote control to confirm the pairing. The cooker hood and the remote control are now set to each other.

2.5 InTouch
The extraction hood has the InTouch function. If you have an induction hob from Novy with InTouch, you can operate the extraction hood from the hob. There is also the option that the extraction hood can be operated with a remote control.
Programming InTouch on the induction plate
The remote control must first work with the hood. If necessary, the remote control code can be changed, as described in Section 2.5
− Connect the plate to the mains supply.
− Touch simultaneously the keys and on the induction plate until you hear a beep signal (prox. 7 sec.).
− The cooker plate now searches automatically for the hood code.
− Wait until the cooker hood illumination begins to flashing OR you hear a “click” sound when you have an extractor hood without lighting (Be patient, this can betake a while).
− Does the light blink or you hear the “click” sound; press immediately on any InTouch key or or + or – or   on the induction hob.
− You will hear a “beep” signal to indicate the link between the two devices.
Now you can operate the hood with the keys on the induction plate.
You can find more information about using the InTouch functions in the InTouch manual for the hob.
2.6 Operation via mobile application
This cooker hood can also be remotely controlled via a mobile device. Is the Novy application on your mobile device installed, then you can connect it to the cooker hood. When the cooker hood is not connected to the mobile device then the cooker hood can be operated in a normal way via the remote control of the cooker hood itself.
Set up
To use the Novy application for your cooker hood and appliance installation you will need the following:
− The cooker hood must be connected to the mains power supply and to be turned on.
− A smartphone or tablet with a current version of iOS or Android operating system.
− Download the Novy application through your favourite app store. Your cooker hood and mobile device should be within range of each other
The application will guide you through the entire procedure. Follow the clues in the application.
Some of the functions can only be activated, changed or consulted via this mobile application.

CLEANING AND MAINTENANCE

Follow all instructions as described in the Conditions for Safety and Use section.
Follow the cleaning instructions below for a longer working life and optimal operation of the appliance.
The bottom panel, grease filter and recirculation filter can fall out when you are handling them. This can result in damage. Make sure you hold the bottom panel and the filter(s) securely at all times when handling them.
The cooker hood is securely attached to the ceiling using suspension cables or framework, but its construction allows it to oscillate slightly, so that unexpected shocks are easily absorbed without damage.
This can cause the hood to move during cleaning. Do not let the cooker hood swing. Do not pull on the cables.
WARNING! Risk of injury! Open and close the bottom panel slowly. Use a stable stepladder and pay attention to stability. Do not step on the hob or the worktop surface.
3.1 General maintenance
Allow the lighting to cool down sufficiently before you start cleaning the extractor hood.
Never use aggressive, abrasive or chlorinated products.
** Do not use a high pressure or steam cleaner.
Stainless steel
Clean with a cleansing tissue with mild cleaning agent then dry with a soft cloth. Maintenance of the stainless steel can be performed with the Novy cleaner (906060).
Coated parts of the extractor hood
The extractor hood can be cleaned with a damp cleansing tissue and a mild cleaning agent
Glass**
Glass parts of the extractor hood can be cleaned with a soft cloth and a glass cleaner.
To clean the inside of the glass structure, first remove the plastic screws of the transparent cover by hand.
The screws are located at the top of the glass structure.
Remove the transparent cover.
Then the accessible parts on the inside of the glass structure can be cleaned by hand.
Then reassemble in the reverse order.

3.2 Removing the bottom panel
If the bottom panel is to be removed from the cooker hood for cleaning, proceed as follows:
− Grasp the bottom panel at the left and right ends.
− Slowly tilt the bottom panel downwards and continue to hold it in place.
− As soon as the bottom panel is at a 90º angle downwards, the bottom panel can be slid to the right to remove it from the hinges. Here you will feel some resistance. Do
this with caution to prevent damage to the cooker hood. Make sure you hold the bottom panel securely at all times.
− The bottom panel can then be cleaned by hand. The bottom panel is not suitable for cleaning in the dishwasher.
− Before reinstalling the bottom panel, immediately clean the accessible parts on the inside of the cooker hood.
− To replace the bottom panel, grasp the bottom panel at the left and right ends and hold it in place. Make sure you hold the bottem panel securely at all times.
− Hold the bottom panel in a 90º angle downwards and slide the bottom panel to the left over the hinges until you notice a click.
− The bottom panel cannot be closed if the bottom panel is not fully positioned over the hinges.
− The bottom panel can then be closed.
3.3 Grease filter
If the following instructions are not followed, there is a risk of fire due to excessive contamination.
Do not operate the unit without the grease filters.
Grease filter indication
**Indication: green indicator lamp starts burning.
After 20 cooking hours, a green lamp on the hood indicates that the grease filter needs cleaning
Accessing the grease filter**
Take hold of the right and left side of the bottom panel (A) and pull down simultaneously. Remove the filter (B) by tak ing hold of its hook and pulling down. 7540_G1

Cleaning the grease filter
The metal grease filter can be cleaned by hand or in a dishwasher.
We recommend cleaning the grease filter by hand.
Cleaning the filter by hand:
− Immerse the filter in a solution of boiling water to which a degreasing detergent has been added.
− Use a brush for cleaning
− Then rinse the filters with warm water under a tap and allow them to dry.
Cleaning the filter in a dishwasher:
− Use a customary dishwasher detergent
− Do not put the saturated grease filters together with crockery in the dishwasher
− Select a programme with a low temperature
− After cleaning allow the filter to drain.
When cleaning in a dishwasher the filter may discolour as a result of the salt content. This does not affect its operation.
Replacing the grease filters
− Before replacing the grease filter, clean the edges of the part in the extractor hood in which the filter is placed.
− Grasp the filter with 2 hands.
− Make sure that the lock or the lip on the filter is on the bottom side.
− Insert the back of the filter in the opening, press the filter upwards at the front and make sure it clicks tight.
You can obtain a new grease filter from a dealer or the Novy website. Article number grease filter: 7530.020.

Resetting the cleaning indicator
When you replace the grease filter after cleansing you have to do is press the [ +] and [- ] keys simultaneously for 5 seconds to reset the replacement indicator.
If you do not do this, the orange indicator lights up when the camera is turned on.
3.4 Monoblock recirculation filter
When selecting recirculation, always set the recirculation programmed on the extractor hood (see paragraph 2.4)
If recirculation is chosen the appliance is connected to an outlet box with a monobloc recirculation filter.
Replacement indicator mono block filter
Indication: orange indicator lamp starts burning
After a fixed period of time, an orange light on the unit indicates that the mono block recirculation filter needs to
be changed.
Access to the mono block filter
The mono block filter is located at the top of the cooker hood.
Carefully remove the mono block filter from the metal filter holder by sliding the filter to one side. It is possible that the power cable may block the sliding out of the filter. The power cable is fixed with a strap on a strap holder. Loosen this first.
Reinstalling the monoblock filter
Carefully slide the mono block filter back into the holder at the top of the cooker hood. If necessary, replace the strap on the strap holder.

Reset the replacement indicator
When you replace the new mono block filters, all you have to do is press the [ +] and [- ] keys simultaneously for 5 seconds to reset the replacement indicator.
If you do not do this, the orange indicator lights up when the camera is turned on.
You can obtain a new monobloc filter from a dealer or the Novy website. Article number mono block filter: 7300.055.
3.5 Change the batteries
− For changing the batteries unscrew the plastic cover, remove the old batteries and insert the new ones. Pay attention to the polarity marking given in the battery compartment.
− Empty batteries are not to be disposed of in the household refuse, but they are to be handed in as chemical waste.

Technical information
− Power supply: 2xAAA batteries
− Frequence: 433.92Mhz
− Numbre of codes: 10
− Worktemperature: 0-50°C
− Dimensions: 110 x 50 x 19mm

3.6 Faults
If there is a fault you can contact your (kitchen) supplier and/or Novy Customer Service.
Belgium Tel.: +32 (0)56 36 51 02
France Tel.: +33 (0)3 20 94 06 62
Germany Tel.: +49 (0)511 54 20 771
The Netherlands Tel.: +31 (0)88 011 91 10
Unite Kingdom Tel.: +44 (0) 207 866 2493
Italy Tel.: +39 (0)39.20.57.501
For all other countries: your local installer or Novy in Belgium: +32 (0)56 36 51 02
To be able to deal with the fault promptly and efficiently it is necessary that the Repaired Service knows which type of appliance you have.
You can find the type number on a sticker in the inside of the extractor hood. This becomes visible as soon as you take the filter out of the extractor hood.
You can note the type number here:

QUICKGUIDE

4.1 Settings
The functions can also be activated, modified or accessed via the Novy mobile application (Novy Connect app).

36
Adjusting intensity of the mood mode (corner spot- lights and/or uplight)| By mobile application (Novy Connect)| | | p 36
Reset cleaning indicator grease filters| 2+3 for 5 seconds| Green indicator lamp
disappears| | p 39
Reset replacement indicator monoblock| 2+3 for 5 seconds| Orange indicator lamp
disappears| | p 39

4.2 Indications

Green indicator
lamp starts burning| Grease flter must be cleaned| If the cleaning instructions are not followed, excessive contamination, risk of fire and loss of efficiency will result.| p 38
Orange indicator
lamp starts burning| Time to replace the monobloc
recirculation filter used| | p 39

NOVY nv reserves the right at any time and without reservation to change the structure and the prices of its products.

NOVY nv
Noordlaan 6
B – 8520 KUURNE
Tel. 056/36.51.00
Fax 056/35.32.51
E-mail: [email protected]
www.novy.com
United Kingdom: +44 (0)207 866 2493

References

• Specialist in cooker hoods and hobs | Novy - Novy
• Specialist in stijlvolle afzuigkappen en kookplaten - Novy

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>