Shenzhen Xhorse Electronics XDKR00 key Reader User Manual

KEY
READER
User Manual

Overview

KEY READER is a professional and portable key recognition device that is able to recognize almost all car and motorcycle keys (including plastic keys and aluminum keys) quickly and accurately on the market. The recognition result is marked with key points intelligently. The device can be connected to Xhorse CNC machines or controlled by a smartphone with Xhorse APP. It’s very easy to use with great stability and accurate identification result.

Structure diagram

Performance parameter

Button instruction

① Power button： press and hold the power button for 5 seconds to turn on the device. And press and hold for 5 seconds to turn off the device.

1. ON state
   Power on and the red indicator light on, then press and hold the power button till the indicator turns white, and the screen turns on to enter ON state. (Picture 1)

2. OFF state
   Press and hold the power button and then the screen goes out, the indicator turns from white to red, and the device enters OFF state. (Picture 2)

② Keyhole switch button: Open or close the key insertion hole.

Screen display instruction

After turning on the device, the screen will display the words “Xhorse”, the device Ver and the Bluetooth icon, and the device SN in succession. When your phone connects to the device by Bluetooth successfully, the screen will display a Bluetooth connection status icon and the device SN.

Connect to phone

Click on [Cut by Bitting] on the APP homepage and select the type of key blank, then click on [Optical Identification] to enter the bitting recognition interface. The KEY READER will connect to the mobile phone via Bluetooth by default. (if you want to connect with WIFI, you can select WiFi connection in the identification interface)

① Bluetooth connection
Click on [Connect] and the interface displays the connectable devices, then select the device to connect according to the device SN. If it’s connected successfully, the device screen will display a Bluetooth icon, and the APP will display Bluetooth connected and corresponding device SN. *Android phones need to set Bluetooth pairing when connecting to the device via APP for the first time.

② WiFi connection

1. Select WiFi connection, click on [Connect] and the interface displays the connectable devices, then select the device to connect according to the device SN.
2. Enter the WiFi name and password that the mobile phone connecting (or turn on the mobile hotspot and enter the name and password of the hotspot), and the APP will connect automatically and then display the WiFi connected and corresponding device SN.

Operation instruction

1. After successful connection, click on [Identification].

2. Place the key according to the figure and click on [Identification], then the APP interface will display  [Identifying], and the device screen will display [Identifying].

3. The device screen will display [Complete] and the APP will display the bitting data after successful identification.

Maintenance

• Do not violently hit, shake or throw the device.
• Do not directly rinse the device with water or other liquids, and do not wipe the device with a damp cloth.
• Do not place the device in a high temperature, high humidity, or dusty environment.
• Do not disassemble or modify the device privately, otherwise, it may cause accidents such as damage to the main board or battery fire.
• Please protect the key components (screen e.g.) to prevent sharp objects from damaging them.

Warranty and after-sale description

KEY READER has a warranty of 1 year. The warranty starts from the date on the invoice. If there is no invoice or the invoice is missing, purchase records from the factory is used as reference.

※ Within Warranty, free maintenance and repairing are not provided if the machine becomes dysfunctional due to the following reasons:

• Operation without referring to or violating the user manual
• Modifications or repairs to the machine by individuals
• Falling, knocking, or wrong voltage
• Force majeure
• Use of the machine in places such as ships that are bad for the machine for a long time
• Damaged or worn-out plastic case due to frequent use

Regarding to customer service and technical support, please contact distributors or Xhorse online customer service team by scanning the QR code on the back and downloading Xhorse official APP.
The picture is for reference only, the product is subject to the actual product. All the information and illustrations in this document are for guidance only. Xhorse reserves the right to alter products designs, dimensions, or info to improve the product’s quality. The contents of this document are fully protected by copyright and may not be copied or reproduced in any form (e.g.mechanical, electronic, printing, or video recording), without permission from Xhorse.

FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CE/UKCA Statements:
Do not use the device in the environment at too high or too low temperature, never expose the mobile phone under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20℃~50℃.

RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body. To maintain compliance with RF exposure requirement, use products that maintains a 20cm distance between the device and the human body.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

WLAN 5G:
5745 MHz ~ 5825 MHz| 13.71 dBm

This charger is for indoor use only. These charger type are SAW24A-120-2000G, SAW24A-120-2000B, output voltage/current is DC 12V,2A. The plug is considered a disconnect device of an adapter.
This product can be used across EU/UK member states.

http://www.inliteresearch.com

FCC ID:2AI4T-XDKR00

Documents / Resources

| Shenzhen Xhorse Electronics XDKR00 key Reader [pdf] User Manual
XDKR00 key Reader, key Reader
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>