KUZCO SF58814 Two Light Semi Flush Mount Instruction Manual
- June 1, 2024
- KUZCO
Table of Contents
KUZCO SF58814 Two Light Semi Flush Mount
Product Specifications
- Product Name: Incandescent Semi-Flush
- Model Number: SF58814
- Manufacturer: Kuzco
- Address: 19054 28th Avenue Surrey, BC Canada V3Z 6M3
- Technical Support: 1-855-855-8926
Product Usage Instructions
- Remove the fixture from its original package.
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the provided junction box screws (1e).
- Make proper electrical connections (black to hot L, white to neutral N, ground to GND) with wire nuts (1b) provided in the hardware package.
- Secure rod (2d) to canopy (2a) and fixture (3a) after feeding fixture wires through the rods.
- Attach the canopy (2a) to the mounting plate (1c) with canopy screws (2b).
- Insert the bulb (4a) into the fixture socket.
Frequently Asked Questions (FAQ):
-
Q: Can I use LED bulbs with this fixture?
A: It is recommended to use incandescent bulbs with this fixture for optimal performance. -
Q: What is the maximum wattage bulb that can be used?
A: The maximum recommended wattage for bulbs to be used with this fixture is 60 watts. -
Q: Is professional installation required for this product?
A: While professional installation is recommended, users with experience in electrical work can install the fixture following the provided instructions carefully.
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
INSTALLATION
- Remove the fixture from its original package
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package
- Secure rod (2d) to canopy (2a) and fixture (3a) after feeding fixture wires through rods
- Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)
- Insert bulb (4a) into the fixture socket
Technical Support: 1-855-855-8926
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com 20240109
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>