NIDAGE AW655 Wireless Endoscope Camera User Manual
- June 6, 2024
- NIDAGE
Table of Contents
NIDAGE AW655 Wireless Endoscope Camera User Manual
Welcome
Welcome to buy this product. Please read the instructions carefully before using the product.
Note: When used for the first time, it must be fully charged. The Screen flicker or cardan, which means the battery is running low and needs to be charged.
General Safety Information
WARNING! Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire or serious personal injury
Save These Instructions
- Prevent object and liquid entry. Liquid increases the risk of electrical and damages to the product.
- The unit is not shock-resistant. Don’t use NIDAGE WiFi endoscope as a hammer and avoid high impact resultant from things as dropping the unit from the height.
- The Lens and tube are water resistant when the unit is fully assembled, but the WiFi box is not. Do not immerse the WiFi box in water.
- Do not use the camera if condensations forms inside the lens. Let the water evaporate before using again
- Turn off the Will Endoscope and place it in a dry enviroment when it is not in in use
- Attention should be given to the eviromental aspects of battery disposal
- It’s normal that the camera will turn hot especially when the LED is the brightest.it will not affect affect the usage or life-span of the endoscope.
- The WiFi transmission distance is about 10meters without any obstacle. please keep the distance between WiFi box and mobile phone within that distance.
- Please be away from other strong WiFi signal when using the product. otherwise.it may affect the WiFi conenction between the WiFi box and the smart phone.
- Please note the camera probe is only IP67 waterproof which means it can do underwater inspections for no deep than 1 meter and no more than several minutes, otherwise, it may damage the camera lens.
- When charging, the power led turns red, the led turns green as fully charged. more over, please use other household adapter/wall charger to charge the WiFi endoscope.
Features
This product is unility glass equipment with the function of real-time video viewning, video recording and picture capturing etc..,which is suitable for usage in narrow area and the area which can not be observed by sight, such as: venicle repairs, sewer inspection/maintainace, vent inspection etc.
Specifications
| Camera | Model | AW655 |
|---|---|---|
| Image Sensor | CMOS | |
| Camera Resolution | 1920×1080,1280×720,640×480 | |
| Horizontal view angle | 45° | |
| Camera Focus Distance | 3cm-15cm(Fix focus ,no zoom) | |
| Diameter | 5.5 mm | |
| Working Voltage | DC 5V/2A | |
| Battery Capacity | 450mAh | |
| WiFi Transmission Distance | 10 meters(with any obstacles) | |
| Waterproof Grade | IP67(for len/tube only) |
Operation
Instruction: the client-side can only support Andriod and IOS systems. Version Requirement Support Android 2.3 and higher,I0S6.0 and higher ( Note: IOS 8.0 lower system can not record videos). Factory Defauld WiFi SSID: NIDAGE_ Factory Defauld Password: 12345678
Detailed Operation Steps For Android:
-
Installing the APP:
-
Method two: Search the free below. “HD WiFi” APP in APP Store.
-
Download and install will view app, then the icon “HD WiFi” will show on your phone.
-
Turn on the endoscope WiFi box power switch, the blue power LED and the blue signal LED will light up.
-
Go to your phone settings, click on wifi connections and NIDAGE will be listed with other wifi connections.
-
Find wireless signal named NIDAGE*****, click it and input password “12345678” to connect.
Detailed Operation Steps For iOS/iPhone:
-
Installing the APP:
-
Method two: Search the free below. “HI) WiFi” APP in APP Store.
-
Download and install wifi view app, then the icon “HD WiFi” will show on your phone.
-
Turn on the endoscope WiFi box power switch, the blue power LED and the blue signal LED will light up.
-
Go to your phone settings, click on wifi connections and NIDAGE will be listed with other wifi connections.
-
Find wireless signal named NIDAGE*****, click it and input password “12345678” and click “join” to connect.
Please download the right “HD WiFi” APP
App Funtions Introduction
Setting: to set SSID name, WiFi password, resolution
Picture Capture: snapshot in-time picture
Video Record: to record video by press this button
Album: to browse the captured pictures and recorded video
Picture Rotate: to rotate in-time picture
Product Struction Production
Recharge: turn off the ON/OFF. When recharge the battery, power LED is on(green light), after it is full recharged, power LED goes out. The recharging time is about 2-3 hours with 5V/2A adapter
How To Install Accessories
The thre(3) included accessaries(mirror,hook and magnet) are all atached to the camera in the same way as illustrated below
What can I do if no image shows on the app or fails connection or image freezing?
- Please check whether you have input the correct WiFi password.
- Please check whether the WiFi box is full of power. Low power may cause connection fails, so please recharge it timely.
- Try to restart the WiFi box and reconnect it with your smart phone.
- Exit the APP and re-enter it.
- Try to uninstall the WiFi View app, and re-install and update it.
- Please keep the distance between the WiFi box and smart phone within 15 meters without any obstacles.
- Keep away from or turn off other strong WiFi signals around while using this WiFi endoscope.
- Not having a positive experience? Contact us immediately, send it to: kekaika@hotmail.com
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>