behringer EUROPORT MPA100BT Portable Speaker with Wireless Microphone User Guide

behringer EUROPORT MPA100BT Portable Speaker with Wireless Microphone

Product Information

The EUROPORT MPA100BT/MPA30BT is an all-in-one portable speaker with wireless microphone, Bluetooth connectivity, and battery operation. It is capable of delivering 100/30 watts of power and offers a convenient and versatile audio solution.

Product Usage Instructions

• Read the user manual and safety instructions carefully.
• Keep the user manual for future reference.
• Follow all safety warnings and instructions provided.
• Avoid using the apparatus near water.
• Clean the apparatus only with a dry cloth.
• Ensure proper ventilation by not blocking any ventilation openings.
• Install the apparatus according to the manufacturer’s instructions.
• Avoid placing the apparatus near heat sources.
• Do not tamper with the polarized or grounding-type plug.
• Protect the power cord from being walked on or pinched.
• Use only attachments/accessories specified by the manufacturer.
• Use the specified cart, stand, tripod, bracket, or table whenusing the apparatus.
• Unplug the apparatus during lightning storms or when not in use for extended periods of time.
• Contact qualified service personnel for any repairs or servicing needs.
• Ensure a proper protective earthing connection when connecting the apparatus to a MAINS socket outlet.
• Make sure the disconnect device (such as the MAINS plug or appliance coupler) remains readily operable.

Important Safety Instructions

• Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock.
• Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
• Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section).
• No user serviceable parts inside. Refer servicing to qualified personnel.
• Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Caution These service instructions are for use by qualified service personnel only.
• To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
21. Use this apparatus in tropical and/or moderate climates.

LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.

LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at musictri.be/warranty.

Hook-Up

Singer-songwriter hookup with a smartphone streaming audio over Bluetooth.

Smartphone streaming audio over Bluetooth with BEHRINGER wireless microphones.

Controls

1. INST/MIC IN combo jacks accept in put signals over XLR balanced, ¼” TRS balanced,or ¼” TS unbalanced connectors. Connecting the wireless microphone system disables the combination jacks.
2. INPUT LEVEL knobs control the gain for either the INST/MIC IN jacks or the wireless microphones.
3. BLUETOOTH/MP3 LEVEL knob controls the overall volume for audio streamed into the unit via Bluetooth.
4. MP3 audio jack accepts audio from phone or media player using a 1/8″ (3.5 mm) plug.
5. WIRELESS SYSTEM LEDs indicate wireless microphone signal input. Connecting the wireless microphones system disables the INST/MIC IN combination jacks.
6. WIRELESS SYSTEM USB input accepts the BEHRINGER wireless microphone receiver.
7. MUSIC/SPEECH switch optimizes equalization for speech when pressed inward and latched. During music playback, the button should be left in the un-latched, outward position for optimum music equalization.
8. MAIN LEVEL knob controls the overall volume.
9. BATTERY LEVEL LEDs monitor the overall amount of remaining battery life when the unit is unplugged from an outlet. The CHARGE LED lights up when the unit is plugged into a wall outlet . (Red, yellow and green LED lit >75%; Red and Yellow LED lit =50%; Red LED only <25%, needs CHARGE.)
10. POWER switch turns the unit off and on.
11. POWER SOURCE jack accepts the included IEC cable.

NOTE: The connection range between speaker and Bluetooth streaming device may decrease if Bluetooth streaming and wireless microphones are used simultaneously.

Charging the battery
The MPA30BT/MPA100BT ships with a rechargeable, internal battery that can power continuous audio playback for up to 20 hours. We recommend that you fully charge the battery before your first use. To charge the battery for the first time, follow this procedure:

1. Set the POWER switch to the “OFF” position.
2. Connect the unit to an AC power outlet. The CHARGE LED will light to indicate the battery is charging.
3. Keep the unit plugged into AC power until the red, yellow and green LEDs light to indicate the battery has been fully charged.

NOTE: The MPA30BT/MPA100BT uses a sealed lead-acid gel battery, and the battery will slowly self-discharge when the MPA30BT/MPA100BT is not in use. Before storing the MPA30BT/MPA100BT for an extended period, fully charge the battery before storage, and then charge again every 3 months.
NOTE: The lead-acid battery needs to be recharged every 3 months for continued operation. Please replace the battery if the MPA30BT/ MPA100BT operating time noticeably decreases, even after a full charge cycle.

Getting started

1. Connect the MPA30BT/MPA100BT to a power outlet by using the included IEC power cable.
2. Turn all LEVEL knobs and the MAIN LEVEL knob down to the full counter-clockwise setting.
3. Connect all analog microphone, instrument, and/or RCA cables to their respective input jacks.
4. Power up the MPA30BT/MPA100BT by pressing the POWER switch to the “on” position.
5. If you are using BEHRINGER wireless microphones, plug the wireless dongle into the WIRELESS SYSTEM USB input. The WIRELESS SYSTEM LEDs will light up when the wireless microphones become active.
6. To pair a Bluetooth device with the MPA40BT/MPA40BT-PRO, follow these steps:
   • Open Bluetooth in your mobile phone, MP3 player or other Bluetooth equipment to pair and connect.
   • In your Bluetooth device, enter the PIN code: 0000 (Bluetooth version 2.0 and above will not require a PIN code).
   • If your Bluetooth device does not receive a connection request, press and hold the Bluetooth button until it flashes quickly, and then re-scan for devices on your mobile phone or mp3 player.
7. While playing music from your Bluetooth device, turn the BLUETOOTH/MP3 LEVEL knob to about the 50% position.
8. Slowly rotate the MAIN LEVEL knob clockwise until you achieve a comfortable listening level.
9. While speaking into each microphone, slowly rotate the INPUT LEVEL knob clockwise until you find a clean, clear sound. If a microphone signal sounds distorted, rotate the LEVEL knob slowly counter-clockwise until the sound cleans up.
10. If you have an instrument plugged into an INPUT channel, play the instrument and slowly rotate that channel’s LEVEL knob clockwise until you find an acceptable level.
11. Balance all of the audio channels against each other by adjusting each channel’s respective LEVEL knob until you find an acceptable mix.
12. Make final adjustments to the MAIN LEVEL knob.

Specifications

Other important information

Important information

1. Register online. Please register your new MUSIC Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your MUSIC Tribe Authorized Reseller not be located in your vicinity, you may contact the MUSIC Tribe Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC

• Responsible Party Name: MUSIC Tribe Commercial NV Inc.
• Address: 5270 Procyon Street Las Vegas, NV 89118 USA
• Phone Number: +1 702 800 8290

EUROPORT MPA30BT/MPA100BT
FCC ID: QWHMPA100BTV2 / FCC ID: QWHMPA30BT
complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:w

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
Caution! The MUSIC Tribe is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This product conforms with essential requirements of RE Directive 2014/53/EU, LV Directive 2014/35/EU, RoHS Directive 2011/65/EU and WEEE Directive 2012/19/EU .

References

• Behringer | Home
• Music tribe – Music is life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>