TIGERKING 54958161 Electronic Safe Box Instruction Manual

ELECTRONIC SAFE BOX
INSTRUCTION MANUAL

Tip: Please do not keep the master keys in the safe!

COMPONENT DESCRIPTION

ACCESSORIES LIST

HOW TO OPEN THE SAFE FOR THE FIRST USE

Please use the key to open the safe for the first use. The operation is as follows.

1. Sliding the cover of master keyhole to left and then sliding the cover of emergency keyhole to right exposed lock channel.
2. Insert the master key into the left keyhole, turn 90° clockwise.
3. Insert the emergency key into the right keyhole turn 50° counterclockwise.
4. Rotate the handle clockwise and the door will be opened successfully.
5. Open the cover of battery box behind the door and put 4 AA alkaline batteries according to the sequence of “+”,”-“. The system is powered on
6. Then you can try to use the original password to open the safe.
7. The factory unified personal password is “1234”

Tip:

1. Before entering the password, press “#” to wake up the LCD display screen
2. After entering the password, please press “#” to confirm

HOW TO SET THE NEW PASSWORD

1. Input the password and the screen will display ”open”
2. During the screen displays “OPEN”, press “*” key within 8 seconds to enter the state of modifying the personal password and the screen will display “——-“
3. Enter 1-8 digits and then press “#” key to confirm
4. The screen displays ”into”, personal password reset successfully

Note: During inputting new password, you can press “*” key to clear the wrong digit entered

THREE WAYS TO OPEN THE SAFE

1. Use the key only, master key + emergency key + knob Insert the master key into the left keyhole, turn 90° clockwise. Then inset the emergency key into the right keyhole turn 50° counterclockwise. Rotate the handle clockwise and the door will be opened successfully.
2. Use the password only, password + knob

1. Make sure the battery of safe has enough power
2. Make sure the master keyhole horizontal before using password
3. In the standby state, press the “#” key to rouse the system, the screen will display “——-”
4. Enter correct password and press “#” key to confirm.
5. The screen will display ”open” and then rotate the handle clockwise to open the door.
6. If the password is wrong, the error will display on the screen. And then the screen will re-display “——-“, you can input the password again.
7. If you enter the wrong password for three times the alarm will continue to sound for 60 seconds. The alarm will stop when you enter the correct password.

3. External battery box + password + knob When the battery of the safe runs out, you can use the external battery box. And then open the safe with password.
   Note: The external battery box is powered by 4 AA batteries which are not included. Never put the external battery box in your safe.

HOW TO SET THE DATE FOR YOUR SAFE

1. When powering on for the first time. The year, month, day and time are 00-01-01 and 00-00 respectively.
2. In the sleep state, press the “*” key, the screen will display the year, month, day 00-01-01.
3. When the date or time is displayed, press the “#” key once to switch between the year, month, day, hour, minute, and day of the week.
4. Use the number keys “0” and “8” to change the flashing year, month, day or hour, minute, and day of the week. Each time you press the “0” key, the number will decrease by one bit, and each time you press the “8” key, the number will increase by one bit.
5. Thesystemwillidentifythevalidityoftheinputnumbers,andinvalidvaluesbeyondtherangewillnotbeconfirmed.

The valid ranges of each parameter are as follows:
Year: 00-99 Month: 01-12 Day: 01-31 Week: 1-7

MOUNTING INSTRUCTIONS

The safe can be mounted to a wall or floor
WLL MOUNTING

1. Drill the appropriate size holes for the anchors you are using
2. Carefully press the anchor into the holes at this time
3. Mount the safe by running screws from inside of the safe and securing to anchors. Ensure the safe is mounted securely

FLOOR MOUNTING

1. Use proper drill tools depending on the type of floor you are mounting the safe (wood, tile, or concrete)
2. Measure the location of the pre-set drill holes, mark their exact position onto the floor
3. Drill the appropriate size holes for the anchors you are using
4. Carefully press the anchor into the holes at this time

DURAL ALARM SYSTERM

1. The alarm will be issued when enter wrong password 3 times or your safe is hit hard. The alarm will stop when you enter the correct password.
2. In standby state, if you press “0” key the screen will display “BELL ON” and then enters the vibrating alarm state. In this state, if you move or hit the safe, the alarm will be issued. The alarm will stop and the vibrating alarm will be Automatically dismissed when you enter the correct password .

IDDEN CODE FUNCTION

Press the “#” key to wake up, press the “*” key once before entering the password, and the entered password will not display numbers. After opening the door, it will automatically restore the non-hidden number.

TECHNICAL PARAMETERS

1. Working power: four “AA” alkaline batteries
2. Working voltage range: 4.6V – 6.0V
3. Working under voltage point: 5.0V ± 0.2V
4. Quiescent current is less than50U A
5. When battery of the safe runs out, the date and time will recover to the original. You need to re-set the date and time. But your personal password won’t be changed.

ANY QUESTION, PLEASE CONTACT US.
THE EMAIL ADDRESS: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>