BEGA 85 023 UniLink Compact Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85 023 UniLink Compact Floodlight
Product Information
Product Usage Instructions
Instructions for use
Product Description
Installation
Cleaning · Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 023 UniLink Compact Floodlight

BEGA-85-023-UniLink-Compact-Floodlight-product

Product Information

Specifications

Model: 85 023
Power Consumption: 0.14 A
Lamp Module Connected Wattage: 24.1 W
Luminaire Connected Wattage: 27 W
Colour Temperature: 3000 K (LED-0800/930)
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 3350 lm
Luminaire Luminous Flux: 2472 lm
Luminaire Luminous Efficiency: 91.6 lm/W

Product Usage Instructions

Safety
The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, it is recommended to use separate overvoltage protection components.

Adjustment of Beam Direction
To adjust the beam direction, undo the joint screw using a hexagon socket head wrench size 5 mm, set the desired beam direction, and then tighten the joint screw.

Note: Do not remove the desiccant bag from the luminaire housing as it is needed to remove residual moisture.

Maintenance
The connecting cable must be checked for external damage regularly and may only be replaced by a qualified electrician.

Accessories

71 247 – 5m connecting cable with free cable ends
71 256 – 0.5m connecting cable with free cable ends
71 280 – Shield
71 285 – Cylindrical shield
71 290 – Exchangeable lens flat beam
71 180 – Plug type F/E (Germany and Europe)
71 181 – Plug type G (Great Britain)

FAQs

Q: Can I use a different wattage lamp module with this luminaire?
A: It is recommended to use the specified lamp module connected wattage to ensure proper functionality and safety.
Q: How do I clean the luminaire?
A: Use a soft, dry cloth to wipe the luminaire. Do not use any liquid or abrasive cleaners.

Compact floodlight BEGA UniLink®

$BEGA-85-023-UniLink-Compact-Floodlight- $1$$

Instructions for use

Application
Portable compact floodlight BEGA UniLink® with earth spike and 5 m connecting cable with plug connector.
A separate mains plug must be ordered in order to connect the floodlight to the mains. The various country-specific mains plugs with 0.5 m connecting cable, as well as extension cables and five-way distribution boxes are available as accessories.

Product Description

Floodlight made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite
Earth spike made of glass fibre reinforced synthetic material
Safety glass with optical structure
Silicone gasket
Reflector surface made of pure aluminium Swivel range -55°/+70°
5 m mains supply cable
X05RN-F FEP 2 × 1@ + 1G2,5@ with plug-in connector
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit
220-240 V 50/60 Hz
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Conformity mark
Weight: 2.2 kg
This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Total load
When configuring your lighting system, please ensure that the maximum power consumption of 6 A is not exceeded. Information on power consumption can be found in the instructions for use and data sheets for all BEGA UniLink® luminaires.
Power consumption of 85 023: 0,14 A

Lamp

Module connected wattage 24.1 W
Luminaire connected wattage 27 W
Rated temperature = 25 °C
Ambient temperature = 25 °C

85 023 K3

Module designation LED-0800/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 3350 lm
Luminaire luminous flux 2472 lm
Luminaire luminous efficiency 91,6 lm / W

85 023 K4

Module designation LED-0800/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 3400 lm
Luminaire luminous flux 2509 lm
Luminaire luminous efficiency 92,9 lm / W

Light technique
Symmetrical wide beam light distribution

Half beam angle 45°
The symmetrical light cone can be modified to resemble flat beam light distribution for special lighting applications by replacing the cover glass.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Caution
The BEGA UniLink® plug connectors may only be connected and disconnected in a voltage-free state.

Installation

Press the luminaire with earth spike vertically into the soil until stability is achieved. If necessary, compact soil around the earth spike.
Plug the floodlight’s connecting cable into the plug contact of the connecting cable with the country-specific mains plug, or into the distribution box or extension cable.
To ensure a sufficiently low protective conductor resistance (loop resistance), the connecting cable of each luminaire in the system must not exceed a length of 50 m from the entry point.

Adjustment of beam direction
Undo joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction.
Tighten the joint screw.

Please note

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Maintenance
The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Accessories

71 280 Shield
71 285 Cylindrical shield
71 290 Exchangeable lens flat beam 0.5 m connecting cable with country-specific mains plugs
71 180 Plug type F / E: system common in Germany and Europe
71 181 Plug type G: system used in Great Britain (“Commonwealth plug”)
71 182 Plug type J: system common in Switzerland and Liechtenstein
71 183 Plug type L: system common in Italy and Greece
71 184 Plug type K: system common in Denmark and Greenland
71 186 BEGA UniLink® Extension cable 5 m 71 187 BEGA UniLink® Extension cable 10 m
71 188 BEGA UniLink® Extension cable 20 m
71 247 Connecting cable 5 m with free line ends
71 256 Connecting cable 0.5 m with free line ends
71 189 BEGA UniLink® Five-way distribution box