MODE KS1460 Redwood Fuelbed Instructions
- July 12, 2024
- MODE
Table of Contents
MODE KS1460 Redwood Fuelbed
Product Specifications
- Model: KS1460 Redwood Fuelbed
- Includes: 15 loose log retainers, integrated infill retainers
- Retainer Type: Flat retainer 103540
Product Usage Instructions
Retainer Installation
- Prepare the integrated infill retainers and the loose log retainers.
- Use finger folds to secure the 15 loose log retainers to the infill to support the logs.
- Ensure the tall vertical fold of each retainer faces inward towards the burners.
- Insert retainer legs into slots oriented towards the burners and fold over to fix in place.
KS1460 Redwood Fuelbed Instructions
Retainer Installation
Before installing logs onto the fire infill, first prepare the integrated
infill retainers and the loose log retainers.
The kit includes 15 loose log retainers using finger folds to secure them to
the infill and to support the logs.
With each retainer
this fold supports the log.
Below: Infill assembly with 15 x highlighted 103540 log retainers. Once folded
always orientate the tall vertical fold inward towards the burners as shown
below.
Below: Locate slots for retainer legs. 
Below: Insert retainer legs into slots orientated towards burners. 
630609_1 KS1460 Redwood Fuelbed Instructions
Below infill underside view: fold over retainer legs to fix in place on the
infill.
Redwood Logs and Embers Installation
Logs must be located correctly as illustrated in this section.
The final log layout should replicate the image shown in Step 3. After the
logs have been located correctly, place the embers in a SINGLE EVEN layer
around the logs, do not add additional embers use only the quantity of bags
provided. The embers must not cover the pilot flame, inside the pilot guard
must be clear of embers.
Note: Improper positioning of any fuel bed media may create carbon build-up
and will alter the units performance. Malfunctions due to improper fuel media
placement will not be covered under warranty.
Redwood Log Index:
Use the index above as a guide for selecting the correct logs.
Redwood Log Setup
-
Step 1: Front
-
Step 2: Front
-
Step 3: Front
Front appearance of completed Redwood log fuel bed. Ready for embers.
Rear appearance of completed Redwood log fuel bed. Ready for embers.
Now place the embers in a SINGLE EVEN layer around the logs over the burners and infill, do not add additional embers use only the quantity in bags provided. The embers must not cover the pilot flame, inside the pilot guard must be clear of embers.
630609_1 KS1460 Redwood Fuelbed Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>