DONGGUAN M10 True Wireless Stereo Earphone Instruction Manual

: June 1, 2024
: Dongguan

Table of Contents

DONGGUAN M10 True Wireless Stereo Earphone
Parameter
How to use
Charging of earphones
FCC
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DONGGUAN M10 True Wireless Stereo Earphone

DONGGUAN-M10-True-Wireless-Stereo-Earphone-
PRODUCT

Parameter

Earphone

Item: Wireless stereo earphones
Version: V5. 3
Profiles: Supports HFP 1.7, HSP 1.2, A2DP 1 AVRCP 1.6, SPP 1.2 and PBAP 1.0
Transmit power: Class 2
Frequency Range: 2.402GHz~2.480GHz
Talkin time : 4-6 Hours(Full charge)
Music: 4-6(Full charge)
Battery: Polymer 3.7V>50mA
Charing time: 1-2 Hours

Charging box

Input: 5V == 1A
Output: 5V == 1A
Battery: Refer to the box label

How to use

The headphones start automatically and pair automatically. Take out two headphones from the charging box at the same time. You can see the two headphones flashing alternately for about 2-3 seconds. The left and right headphones turn to red and blue lights. The headphones prompt the”pairing success”and the headphones can be used.If the headphones do not turn to slow flash, just double-click the button on the “R” headphones. You can enter the left-right headset pairing and enter the waiting mobile phone search status.
Mobile phone link operation: Open the mobile phone Bluetooth search, and click the link in the searched device name TWS V5. 1(or the box label model). You will see the phone display”Connected.
At the same time, the left earphone(L)prompts”connected”. That is the link is successfully paired and ready to use.
Prev./next song operations: Double-click the main headset (L) for the previous song. Double-click the secondary headset (R)for the next song.

DONGGUAN-M10-True-Wireless-Stereo-Earphone-FIG-1

Note ! Due to the version change, some earphones do not have double-click and triple-click functions. Please consult the sales personnel for details

Call answering and hanging up : A call coming, press the headset button once to answer. After the call ends, press the headset button again to hang up the call.
Reject the call: Press and hold the headset button for 2 seconds to reject the call.
Start the phone Siri: Press the headset button for about 1 second to hear the prompt tone” voice dialing”-let go, the phone Siri function has been activated.
Shutdown or turn off: Put the earphone directly back into the charging box, the earphone automatically disconnects from the mobile phone, or press and hold the headset buttons for 3-5 seconds, the headset indicator light flashes red for 3 times. It is turned off afterward.
More than 2 times use: Open the mobile phone bluetooth with the mobile phone that has been linked to use, and take out the earphone in the charging box at the same time, without any operation, it will automatically link with the mobile phone. If you use a different phone, you need to follow the first item before you can use it.

When the earphone’s battery level is low
The headphones will repeat a “battery level low. please recharge” voice message. and at the same time, the is no indicator that can edit to place es as oto comes to date a cal, and the call is automatically transferred back to the phone.

Charging of earphones

The earphones are equipped with a built-in rechargeable battery which is not removable. When using the device for the first time, ensure that the battery is fully charged.
Connect a charging cable to the charge port of the earphones, and plug the cable into a standard USB 5V outlet. During charging, the light indicator will turn red. When the devices are fully charged, the indicator will change from red to blue or off. Then unplug the travel charging cable from the USB power outlet and the earphones.

Use only charging adapter approved by authentication. Unapproved or non-standard
USB 5V outlet may result in damaging the earphones, or explosion under extreme conditions, and will void the product warrant.
Repeated charging and discharging of the earphones will decrease the battery performance over time. This is normal for any rechargeable battery.
Do not make or receive calls during charging. To answer a call, always unplug the charging cable first.
To conserve energy, if not used, unplug the travel charging cable from the earphones.
Because the travel charger does not have a power button, please unplug the travel charging cable from the socket before disconnecting from the power source. During usage, the travel charging cable should be kept close to the socket.

FCC

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, under part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or in conjunction with any other antenna or transmitter.