DONGGUAN Y6 Wireless Karaoke Microphone Bluetooth Speaker User Guide

Y6/Y6S
Wireless karaoke
microphone &speaker

Y6 Wireless Karaoke Microphone Bluetooth Speaker

PREFACE
Thank you for purchasing our company’s products. Before using this product, please read this manual carefully and be sure to keep it safe. The manual is convenient for future reference, and all content has been carefully prepared by our company. If there are any printing, omission, or errors, Please understand.
NOTE

• Do not use this machine in extremely hot, cold, dusty, and humid environments.

• Do not drop, collide, or vibrate violently during use.

• Moderate ventilation should be maintained around the body, otherwise it may cause an increase in internal temperature and 0ultimately damage the wiring.

• When moving the local device, first shut down and disconnect the corresponding connecting wires with other devices.

• The surface of the speaker and the speaker should avoid contact with corrosive liquids and gases, and should not be placed in direct sunlight for a long time At. If there is dust, it can be cleaned regularly with a clean soft cloth. If there are stains, they can be leaned without strong agents Wipe with solvent.

• Do not forcefully press switches and other devices.

• Ifthe machine suddenly emits smoke or other abnormal phenomena, please quickly shut down and unplug the charging plug to avoid Causing an accident and contacting a local dealer for repair.

• Changes that occur due to the performance and functionality of the product will not be notified separately.
  This product has no dustproof, moisture-proof, or waterproof functions.

• Do not disassemble this machine without authorization to avoid danger.

• If consumers use a power adapter for charging, they should purchase a matching device that has obtained CCC certification and mects the standard requirements. The power adapter.
  3 To reduce unnecessary power loss, this product will automatically shut down after 10 minutes of no signal input.

FUNCTIONAL DIAGRAM

SPEAKER BUTTON OPERATION

• Volume down button: Short press the volume down button; Long press one song;
• Power on button: Short press to pause playback; Long press for 2-3 seconds to turn on/off, double-click Bluetooth to turn on/off;
• Volume up button: Short press the volume up button: Long press the previous song:
• Mode key: Short press to switch between Bluetooth, TF card, USB drive, and AUX modes (note: TF  ard, USB drive, and AUX modes can only be switched when corresponding devices are connected). Long press to tum off the music light; double-click to turn on the music light, switch to select the music light;
• TYPE-C charging interface.
• IF card interface
• harging indicator light hole, charging type red light always on, fully charged light off.
• AUX interface.
• U-disk interface

MICROPHONE BUTTON OPERATION

• Power on button: Long press to turn on/off; Short press to switch: microphone adjustment, reverb adjustment, accompaniment adjustment; Double click to control the speaker playback pause;
• Key: Short press to adjust the microphone volume, accompaniment volume, and reverberation factor; Long press to control a song on the speaker;
• Key: Short press to adjust the microphone volume, accompaniment volume, and reverberation factor; Long press to control the next song on the speaker;
• Mic key: Short press to switch: KTV mode, female to male, male to female, doll sound, Warcraft sound; Double click on the elimination vowel to turn it on/off; Long press to turn off/on the microphone
• The blue light flashes quickly when the wireless microphone is successfully connected.

The blue light remains on, while the red light remains on when the wireless phone is charging. The red light turns off when fully charged, and flashes twice every 5 seconds when the battery is low;

INSTRUCTIONS

BLUETOOTH MODE

1. Bluetooth connection: When turned on, the default setting is Bluetooth. Enter Bluetooth mode or press the “MODE” button to switch to Bluetooth mode. Turn on Bluetooth scanning on your phone, search for” Y6/Y6S “ and click on pairing. After successful connection, there will be a prompt tone.
2. Play music: Open your phone or other Bluetooth device, download and play your favorite songs.
3. After connecting the machine to the phone once, Bluetooth has a memory function, which can be automatically or manually connected after turning on the phone,

If you need to disconnect, you can use your mobile Bluetooth device to disconnect or double-click the power button to forcibly disconnect Bluetooth.
TF CARD MODE

1. Insert the TF card, and the machine will automatically pertorm a priority playback willy a prompt sound. When all TF cards are inserted, you can swilch by briefly pressing the “MODE” button.

USB mode

1. Insert the USB flash drive, and the machine will automatically prioritize playback with a prompt sound. When all the USB flash drives are inserted, you can switch by short pressing the “MODE” button.

AUX (EXTERMAL AUDIO INPUT) MODE

1. Insert the AUX external audio cable, and the audio system will automatically play back with priority and a prompt tone.
2. When both AUX and TF cards are inserted simultaneously, you can switch by briefly pressing the “MODE” button.

MUSIC LAMP DESCRIPTION
This product has 5 types of music lights, including color rotation, alternating transformation, full color breathing, monochrome breathing, and gradient effect lights.
The default mode for turning on is full color rotating light effect. Double click the MODC key to switch between one light effect at a time, and long press the MODE key to turn off the light effect.
WIRELESS MICROPHONE USAGE
The speaker and microphone are turned on simultaneously, and the 2.4G wireless signal is automatically paired. At this time, users can start shouting, and they can adjust the buttons to their favorite style according to their preferences. Note: The size of the accompaniment music can only be adjusted when the microphone is switched to accompaniment mode, The reverb mode can only be adjusted when the microphone is switched to reverb mode;
BASIC PRODUCT PARAMETERS
Product Name: Y6/Y6S
Box material: ABS material
Bluetooth version: Bluetooth 5.3
TF card: supports up to 32GB
Bluetooth receiving distance: = 10 meters
Speaker impedance: 40
Speaker power: SW
Signal to noise ratio: 2 87dB
Distortion rate: < 5%
Frequency response range: 50HZ-18KHZ
External interfaces: TypeC, AUX, USB drive, TF card interfac
Charging voltage: 5V/1A
Control method: button adjustment
Speaker size: 105x105x100.9mm
Working temperature: U “C -45 °C
Executive standard: GB/T13837-2012; GB17625.1-2012; GB8898-2011 “According to the company’s business development, the functional parameters and image content of the product may be adjusted at any time, and cannot guarantee that. Timety updates of relevant packaging and instructions shall be based on the actual functionality and content used by customers.

WARRANTY TERMS

1. According to relevant national regulations, we will fully implement the Three Guarantees policy.
   The users of the product will follow the “Household Audiovisual Products” released by relevant national departments on July 23, 2002. Regulations on Responsibility for Repair, Replacement, and Return “Enjoy comprehensive three guarantees service.

2. Warranty principles
   (1) Under normal operating conditions, if a malfunction occurs without disassembly or repair, the product host will be replaced within seven days from the date of purchase, with a one-year warranty and lifelong maintenance.
   (2) If there are quality issues with product accessories such as connecting cables befor sale, they can be “replaced with new ones” and are not covered by the warranty. Under one of the following circumstances, three guarantees are not implemented, but paid repairs can be implemented:
   A. Damage caused by human factors, including damage caused by use in abnormal working environments and failure to follow the instructions;
   B. Users dismantle the machine without permission, repair, modify or repair it without the joint guarantee unit of our company;
   C. Damage caused by force majeure (such as floods, fires, earthquakes, lightning strikes, etc.);
   D. Without a product warranty card and valid purchase voucher;
   E. The product warranty card and purchase voucher do not match the product model or are altered without authorization.

3. Warranty method
   (1) When providing three guarantees, one must present a warranty card and a valid purchase voucher. If lost, please contact our customer service department System, query user information files.
   (2) For products that meet the warranty requirements, you can directly handle the exchange procedures with the agent. If there is a malfunction in the host during the exchange. Free replacement of our company’s same specification and model host;
   If the accessories of the host are faulty. replace them free of charge.
   (3) For products that require maintenance, you can contact our designated agent or after-sales service center for specific repairs Matters.
   (4) Please fill oul the warranty card immediately after purchasing the product. It is invalid without the company’s after-sales service seal.
   (5) Please make sure to fill out the warranty card. Please ask the salesperson to collaborate with the customer on the sales site to carefully fill out the warranty information. Return the receipt card to our company for better enjoyment of our professional services.

AFFIRM
We cannot control any misunderstandings that users may have about this manual, therefore, our company will not use it again. We are responsible for any accidental damage that may occur during the process of this manual and do not assume any responsibility for any third party damage caused by the use of the product. Fang is responsible for claiming compensation.
This product has different batches and functions, and the final interpretation rights belong to the company it you have any questions during the veritication, please contact the dealer.
The company promises to strictly implement the national three guarantees service policy.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful nterference, and
(2) this device must accept any interference received, including nterference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These imits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not nstalled and used n accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful nterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receivers connected.
• Consult the dealer or an experienced radio!TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure
This device complies with FCC radiation exposure imits set forth for an uncontrolled environment. This equipment should be used as portable exposure without any restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>