HOLDLAMP Dongguan Tong Global Industrial Co Ltd V6 App Battery Wireless Instruction Manual

HOLDLAMP Dongguan Tong Global Industrial Co Ltd V6 App Battery Wireless

Product Information

The product is called Crux, a battery-powered and wireless DMX intelligent RGBAW UV color light. It has 6 and 10 DMX channel modes that can be selected using the menu. The fixture has 12 static colors and can be controlled using a wireless DMX transmitter or run in master and slave mode. The product comes with a user instruction manual that provides safety precautions, warnings, and general instructions for using the product.

Product Usage Instructions

Set-Up

When setting up the Crux, make sure to follow the safety precautions outlined in the user manual. The unit should not be exposed to moisture, explosive materials, or heat sources such as lighting fixtures, amplifiers, heat registers, stoves, and radiators. Before plugging in the power, ensure that the local power outlets match the required voltage of the unit. Do not attempt any repairs yourself as doing so will void your manufacturer’s warranty.

Using Sound Active Mode

To set the light at sound active mode and stay at sound active mode:

1. Press Menu
2. Press Up/Down button until “slnd” appears
3. Press Enter
4. Find “nast” by pressing Up/Down button then press Enter
5. Press Up button until “Shnd” appears on display then press Enter
6. “Soun” will appear on display then press Enter
7. After a few seconds of pressing Enter, the light will start to work at sound active mode.

If you wish to connect other lights to work at the same mode without setting or slave mode, then:

1. Press Menu
2. Find “slnd” and press Enter
3. Choose “sl1” or “sl2” then press Enter
4. Follow the same process for all lights you want to work at the same mode
5. After a few seconds, the lights will start to work in the same function as the first light.

You can connect the lights by DMX cable or wirelessly. When connecting wirelessly, make sure the signal switch is on. This is the function of master and slave.

Thank you for purchasing the APP Core by our company. Every product has been well tested and has shipped in perfect operating condition. When receiving our products carefully check the shipping cartoon for damage that may have happen during transport. In case of the damage inspect the fixture for the damages or missing accessories necessary to operate. If parts are missing or fixture has been damage please report this by Product.

DMX CHANNEL

Core APP Batery it has 6 and 10 DMX channel mode.
User can choose mode by menu, chnd and choose 6/10 DMX channel mode

Product Description

• Power supply: AC110V-250V
• Frequency: 50-60Hz
• Power consumption: 108W
• Light source: 6pcs 18W high brightness 6 in 1 leds
• Lamp life: 6-10 ten thousand hrs
• LED angle: 15/25/40 degree
• Color: 16.7 million kinds of color change
• Control channels: 6/10 CH
• Control mode : DMX512, master/slave, auto, sound active, infrared control, phone App.
• Automatic model (by function button) : color change, color strobe, color dimmer, color gradual change/color jump change
• Operation menu: 4 digit digital LED display
• Packing size: 138145184mm
• N.W: 3.2kg
• G.W: 3.5kg

MENU MAP

Caution
Do not attempt any repairs yourself. Doing so will void your manufactures warranty. In the unlike event your unit may require service please contact us
Warning
To prevent or reduce the risk of the electrical shock or fire, do not expose this unit to any moisture. Please read this manual carefully to familiarize yourself with basic operations of this unit

Safety precautions

1. Do not expose this unit to , wet moisture, explosive
2. Before plugging the power be sure local power outlets matches with the required voltage of the unit
3. Do not remove the cover under the circumstance in case you are not qualified to do so
4. Never connect the power when cover is removed
5. Never use this unit if it becomes damage
6. Never connect this unit to any if dimmer and / or power pack
7. If the unit will not be used for the long time , disconnect it from the power supply
8. Always mount this unit safe and stable and make sure the area will have proper ventilation. Take care this unit will not mounted in are close to heat sources such as lighting fixtures, amplifiers heat registers, stoves and radiators
9. Always contact us in case you have any doubts

General Instruction

Crux is a battery powered and wireless Dmx intelligent RGBAW UV color light. User can control the light by using wireless Dmx transmitter or run at master and salve mode. Fixture it has 12 static color, user can set lights at static color mode without using the Dmx controller.

Set-Up

Crux in had used switching voltage power supply, User can use directly plug in any voltage from 90V-240V when charging or operating at charging mode. Battery it can be fully charged after 3-4 hours of charging, user can also operate the light while charging the battery. When User ready to operate the light or use in event or any places first user need to turn on the power switch. After on the Power switch user can start to set up light at wireless Dmx mode, wire Dmx mode, master and salve. Sound active mode, static color mode, auto mode, strobe, fade or test mode. There is 2 thing must be remember by user 1. Operate light at Dmx Mode: Always set the fixture from menu at “Sl1 or Sl2” mode, process; Press menu then press up/down key until appear “Slnd” press enter at “Slnd” choose Sl1 or Sl2 and press Enter, after some second light will be stay at “stby” means at standby mode to catch dmx signal, no matter its cable or wireless Dmx. Note: when operate light at wireless Mode, make sure that signal switch is on, fixture its not too far from the wireless DMX Transmitter, after on the signal switch wireless indicator bulb should show red color, once fixture start to receive the signal this indicator bulb it will show blipping green color led, some time if wireless signal indicator bulb show other color then continually press black button below the led indicator bulb until it shows red color. Some manufactures wireless transmitter it has different led bulb color signal, make sure with supplier which is color indicate the transmitting signal and set same color at fixture’s wireless signal indictor by pressing the black button(id code selector) of fixture, once both color are same wireless signal led it will start to blip green color, remember green color means its receiving signal from master unit or dmx
controller.

1. Operate light without using Dmx controller or built in color or effects or strobe or fade or static color, sound active or master and slave: Always set the fixture from Menu at “Nast” mode, then user can go inside the “Shnd” and choose any built in
   effects such as sound active, static color, strobe, fade, Process;
   Press menu then press up/down key until appear “Slnd” press enter at “Slnd” choose “nast” and press Enter then Press Up
   button choose “Shnd” then press enter, now user can choose any type of effect mode, soun for sound active mode, colo for static color mode, StCo for strobe and Fade for built-in effect types. Examples:

2. Set light at sound active and stay at sound active mode Press Menu then press up/down button until appear slnd, press enter at slnd, find nast by pressing up/down button then press enter, Press up button Shnd will appear at display then press enter now you can see soun at display then press enter, after some second of pressing enter light it will start to work at sound active mode.

3. If you wish connect other light also at same mode without setting or salve mode, then Press Menu, find slnd and press enter then choose sl1 or sl2 then press enter. Follow same process at all lights you want to work in the same mode, after some
   seconds light it will start to work same function as first light
   You can connect the lights by Dmx cable or also can connect wirelessly. When connect wireless make sure signal switch it’s on. This is a function of master and slave.(App #. 1)

4. Set and stay at static color: Press Menu- Up/down buttonSlnd-enter- press up button- Shnd- Press enter- up button- colo- press enter- choose any color number from1-12 and press enter after some seconds your choose color it will start. For link fixtures follow App #. 1.

5. Make your own custom color and display: Press menu, send- Press enter choose Nast- enter, press up button, find nanu put
   the value 1-255 on RGBAW for each color and press the up/down button find- and press enter- choose colo press enter and choose Co11 and press enter after some seconds the light will start to project custom-made color as per the value of the color you put.

APP Guideline

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>