Dongguan Puleduo Technology Co Ltd KE6 Smart Watch Instruction Manual
- June 1, 2024
- Dongguan Puleduo Technology Co Ltd
Table of Contents
Dongguan Puleduo Technology Co Ltd KE6 Smart Watch
INSTRUCTIONS FOR USE
Power on/ off
- Power on : Charge or long-press the button for 3 seconds to turn it on;
- Power off : Switch to the shutdown interface or long-press the button for 3 seconds to confirm shutdown.
Operating Methods
- When the watch is on, the wrist raises or press the button to wake up the watch and swipe to switch the interface;
- If no use, the screen will be off in 5 seconds by default. You can modify the off time in the APP or watch setting;
- 24-hour heart rate monitoring is on by default, you can choose to turn it on or off in the General Settings of the APP.
INSTALL APP
Before using the EIGlIS Smart Watch KE6, please download and install the APP “GloryFitPRO”
Method 1 – Scan QR Code:
Scan the QR Code on your watch or the User Manual here with your phone and
select the correct App “GloryFitPRO” to install.
Method 2 – Download in the App Store
For Apple Users: Search “GloryFitPRO” in the App Store to install it.
- For Android Users: Search “GloryFitPRO” in the Android Market, like Google Play.
- Note: Device requirements: Iphone 11.0+ and above; Android 5.0+ and above, support Wireless.
DEVICE CONNECTION
Go to APP “GloryFitPRO”, click “Device” – “Add Device” “Select Device”, choose
the corresponding model, and follow the prompts to connect. (Refer to the
following picture for operation)
Wireless Pairing
- New users need to register according to the requirements within the APP, after registration is complete, enter the account number and password to log in.
- Turn on the Wireless of the phone, then open the APP to pair the watch. After successfully pairing, the APP will automatically save the Wireless address of the watch; the APP will automatically search and connect the watch when it is opened or running in the background of your phone.
- Data Synchronization: Scroll down on the APP homepage to synchronize the data (The smartwatch can store offline data for 7 days, the more data you have, the longer it takes to synchronize, up to about 2 minutes.)
- Synchronize Contacts: Go to the Wireless setting of your phone and open Synchronize Contacts. (Refer to the following picture for operation)
OVERVIEW OF SMART WATCH KE6
- Touch Screen : Scroll down to enter status bar, scroll up to view notifications, swipe left to enter the main function, and swipe right to enter the frequently used function menu.
- Upper button : Long press to turn on/off / Startup screen / Return to home interface / Rotate slide.
- Lower button: Startup screen / Customized shortcuts.
MAIN FUNCTION INTERFACE
Home Interface
- Main interface: Smartwatch KE6 has 5 default dials, in the home interface, long press for two seconds, after the vibration, you can swipe to switch the dial. After pairing with the APP, the watch will synchronize the time, date and day of the week information of the phone. Plenty of dials/ Custom dials: Open the APP, and click “Device” – “Dial Settings” to enter the dial centre to select or customize dials.
Call
After the smartwatch KE6 is successfully connected to the phone, you can make
or receive calls directly from the watch, the watch will instantly synchronize
the dialling number.
Al Voice
After the smartwatch, KE6 is successfully connected to the phone, it can
directly conduct intelligent voice dialogue.
Notification
Scroll up the home interface, you can view the message notification. Tap to
view detailed messages, you can choose to delete them at the bottom of the
message, the watch can save 8 recently pushed messages, scroll up to flip, and
scroll down to the end to return to the home interface.
Sports
Click to enter the exercise interface, and add common sports modes (110+
sports modes). Select a specific sports mode, click to start monitoring, press
the upper right button or swipe right to pause, click” ” to end.
Daily Activity Status
Switch to the Daily Activity Status screen to view the current status of
steps, distance and calories. The distance and calories are calculated based
on the current number of steps, height and weight set within the APP.
Heart Rate
Switch to the heart rate interface, click “Start”, switch the menu to re-
measure.
Blood Oxygen
Switch to the blood oxygen interface, click “Start”, and switch the menu to
re-measure.
Pressure
Switch to the pressure interface, click “Start”, and switch the menu to re-
measure.
Sleep
Switch to the sleep interface to view sleep information.
Weather
Switch to the weather interface to view the weather and temperature.
Music
After the smartwatch KE6 is successfully connected to the phone, turn on the
music control and press the play button to play the music, support pause and
switch songs.
Alarm Clock
Enter the alarm clock interface, you can add or delete alarm clocks, and you
can set up to 5 groups of alarm clocks.
Breathing Training
Enter the breathing training interface, and set the time of breathing training
(default training 1 minute). Click “Start”, and follow the animation and
vibration for breathing rhythm training.
Physiological Cycle
This function will be enabled only when female users are logged in. Click
“Physiological Cycle” in the APP – turn on the reminder, set up your
physiological cycle status, and then you can view it on the watch.
Find Your Phone
Switch to the find your phone interface, under the connection status, tap
“find your phone”, and the phone will ring to remind you.
Remote Camera
Open the APP, select “More Settings” – “Remote Photo” – and shake the watch to
take photos.
Stopwatch
Switch to the stopwatch interface, click to start the timer, and when the
timer is stopped, swipe right to exit back to the previous interface.
Timer
Switch to the timer interface, you can select the time that has been set or
add a custom time.
Calculator
Click to enter the calculator function and swipe right to exit.
Flashlight
Click on the flashlight interface to open the flashlight. Click the screen to
close the flashlight. Swipe right to exit.
One-touch Monitoring
Switch to one-touch monitoring mode and click “Start” to monitor heart rate/
oxygen/ pressure at the same time.
Exercise Log
Switch to the exercise log interface to view the recent exercise log.
Setting
- Screen Settings.
- Sound and Vibration.
- Do Not Disturb Mode.
- Theatre Mode.
- Lower Button Setting.
- Power Saving Mode.
- Time and Date.
- Password.
- Motion Recognition.
- System Menu.
- QR Code.
- About
PRECAUTIONS
- Do not disassemble, repair or modity the watch by yourself.
- Do not expose to chemicals such as gasoline, cleaning solvents, alcohol or insect repellents.
- Do not use in high-pressure, high-magnetic environments.
- Do not wear the watch in a hot bath, saunas, etc.
- Do not turn on more pushes without special needs.
- It is strictly prohibited to use an over-voltage load power supply for charging. (Smartwatch KE6 supports 5V 500MA charging.
- It is prohibited to throw it into the fire to avoid an explosion.
- Please avoid severe impact, extreme heat and sun exposure to the watch.
- Please dry it with a soft cloth before charging when the watch gets wet, otherwise the charging PIN will corrode and lead to charging failure.
- It may be uncomfortable if you have sensitive skin or wear the watch too tightly.
- Please dry the sweat on your wrist in time, the watch band may cause skin allergy and itching if it contacts with soap, sweat, allergens or polluting ingredients for a long time.
- Weekly cleaning of the watch is recommended. Wipe with a damp cloth and use mild soap to clean up of oil or dirt.
FAQ
What should I do if a Wireless connection fails?
(Failed to connect/reconnect or very slow to connect/reconnect)
Note: Confirm that your device is iOS 11.0+ or Android 5.0+ or above and supports Wireless.
- Due to the problem of signal interference in a wireless connection, it may take too long to connect each time. If you can not connect for a long time, please make sure that the operation is carried out in an environment without magnetic fields or interference from multiple Wireless devices.
- Turn the Wireless off and turn it on again.
- Close the APP or restart your phone.
- Your phone should not be connected to other Wireless devices or features at the same time.
- Make sure the app is running properly in the background, if not the connection may fail.
Can’t search for the watch?
- Please make sure the watch is in a charged and activated state and not connected to another phone; then put the watch close to your phone. If it still doesn’t work, turn off the Wireless on your phone, and then restart the Wireless after 20 seconds.
- Make sure your phone has GPS turned on.
Why should I wear my watch tightly when measuring my heart rate?
Smartwatch KE6 uses the principle of light reflection to calculate your heart
rate by capturing the signal reflected to the sensor after the light source
penetrates your skin. If you don’t wear it tightly, ambient light will enter
the sensor and affect the measurement accuracy.
Why don’t I get message notifications when I have notifications turned on ?
For Android phones:
First, make sure your phone and watch are connected, then turn on the corresponding permissions in the phone settings, allow “GloryFitPRO” to access incoming calls, SMS, and contacts, and keep “GloryFitPRO” running in the background. If your phone is installed with security software, please add “GloryFitPRO” is trusted.
For iPhone: If there is no reminder after connecting, it is recommended to restart the phone to reconnect. When connecting the watch again, you must wait for the phone to pop up the [Wireless Pairing Request] – [Pairing].
Is the smart watch waterproof?
Support IP68 waterproof and dust-proof rating ) Can be worn while washing
hands, in the rain, or washing the car.)
Does the Wireless connection need to be on all the time? Is there still
data when disconnected?
Data is retained on the watch before it is synchronized (7 days of data can be
retained). When the Wireless connection between the phone and the watch is
successful, the data of the watch will be uploaded to the phone automatically,
please synchronize the data to the phone in time.
Note: If you turn on the call and notification function, you must keep the Wireless in the connection state, and the alarm clock reminder supports offline.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interterence received, including interference that may cause undesired operation.
RF warning statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.