AViANCE HD62467 4.75 in. 1 Light Polished Chrome Wall Sconce Instructions

AViANCE HD62467 4.75 in. 1 Light Polished Chrome Wall Sconce

Product Information

Specifications:

• Model: HD62467
• Brand: AVIANCE
• Power Source : Electric
• Color: Not specified
• Material: Not specified

Product Usage Instructions

Assembling & Installation Instructions:

1. Shut off the power at the circuit breaker box.
2. Remove old fixture and all hardware from the Junction Box.
3. Unpack the new fixture and lay out all parts on a clear area.
4. Attach the mounting plate to the junction box using two junction box screws.

Connecting the Wires:

1. Connect the Black wire from the fixture to the black house (hot) Wire.
2. Connect the white wire from the fixture to the white (neutral) house wire.
3. Secure all wire nuts and consider wrapping connections with electrical tape.
4. If there are ground wires, connect fixture’s ground wire accordingly.
5. Tuck the wire connections neatly into the wall junction box.
   Your installation is now complete. Return power to the junction box and test the fixture. Thank you for purchasing an AVIANCE product.

FAQ

What should I do if I encounter missing parts during assembly?
For assistance with parts or assembly, please email customer service at info@aviancelighting.net.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
3. Attach the mounting plate to the junction box using two junction box screws as show. The side of the mounting plate marked “GND” must face out. The junction box is not included.
4. Guide fixture wires through hole in center of mounting plate.
5. Follow wiring instructions carefully (see fig.2).
6. Place the lamp body(A) over the mounting plate, aligning the backplane holes with screw hole of the mounting plate on side, then lock it securely with mounting screws.
7. Place the glass(B)/collaring ring(C)/check ring(D) insert to the lamp holder, lock them securely with the socket wrench(E), then remove the socket wrench and save it.
8. Install the light bulbs(not included) in accordance with the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!

CONNECTING THE WIRES (Fig.2)

1. Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
   Your installation is now complete. Return power to the junction box and test the fixture.

Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:info@aviancelighting.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>