Tribit BTS11 Portable Wireless Speaker User Manual
- June 14, 2024
- Tribit
Table of Contents
- Package Contents
- Product Illustration
- How to Charge the Speaker
- Button Control
- Press
- Bluetooth Connection
- Multifunctional Button (MFB)
- Volume
- Time setting
- Ambient Light
- Stereo Mode
- Reset
- Specifications
- Customer Service
- Safety Precautions
- FCC Statement
- IC Caution
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Tribit BTS11 Portable Wireless Speaker User Manual
Package Contents
-
Tribit Aqua Ease
-
USB-C Cable
-
User Manual
Product Illustration
Tips Support micro SD card up to 32G, support file system format FAT32
How to Charge the Speaker
Connect the other end of charging cable to a charging adapter and connect the
charging cable to the USB-C charging port on the Bluetooth speaker.
Note
During charging, the indicator light is always on in red.
When the speaker is fully charged, the red indicator light goes off.
When using in wet or watery environment, please plug the silicone plug
tightly to avoid water in the charging port
Button Control
- On/Off
|
Press
| Turn on|
- The status indicator light is always on in blue.
- When the battery is low, the status indicator will flash in red.
- During charging, the indicator is always on in red.
- When the speaker is fully charged, the red indicator light goes off.
---|---|---|---
Press| Turn off| All lights are off and the display goes off.
Press and hold for 8s| Forced shutdown| All lights are off and the display
goes off.
Note: If the Tribit Aqua Ease Speaker is unable to be powered off due to unknown reasons, you can forcibly turn it off by pressing and holding the power button for 8 seconds and then the speaker will re-start automatically
Bluetooth Connection
****| Press and hold the Bluetooth button for 1s| The speaker will
automatically enter into Bluetooth pairing mode.| The blue indicator light
will flash rapidly.
---|---|---|---
Press twice| Micro SD card playback mode| White light is always on
Tribit Aqua Ease:
- Automatically re-connects to the last paired device.
- Connects 2 Bluetooth devices at the same time.
- Memories 8 Bluetooth devices.
Note : When 2 devices are connected to the Tribit Aqua Ease speaker, device A and device B cannot play simultaneously—only one speaker at a time.
Multifunctional Button (MFB)
Music Mode | Press once | Play / Pause |
---|---|---|
Press twice | Next track | |
Press three times | Previous track | |
Press and hold for 1 second | Activate voice assistant | |
Phone Conversation | Press | Answer / end a call |
Press and hold for 1 second | Reject a call | |
Press and hold for 1 second (during a call) | Pause the current call and answer |
an incoming call
Press (during a three-way calling)| Switch between the 2 calls.
Press and hold for 1 second (during a three-way calling)| End the call with
the caller not in the line.
Volume
| Press| Increase the volume
---|---|---
Press and hold| Continuously increase the volume
| Press| Decrease the volume
Press and hold| Continuously decrease the volume
Time setting
| Press and hold for 5 second| Enter time settings
---|---|---
Press| Confirm settings
| Press| Time mode switching
Ambient Light
| Pres| Switch / Turn off the light effect.
---|---|---
Stereo Mode
- Make sure speaker A and speaker B are both are turned on.
- Press and hold the Bluetooth button on speaker A for 5 seconds to enter the stereo pairing mode. ( Speaker A is the primary speaker.)
- Press and hold the Bluetooth button on speaker B for 1 seconds to enter the stereo pairing mode. (Note: If this speaker is already in pairing mode, there is no need to perform this operation)
- When you hear the prompt, “Stereo Mode”, the stereo pairing is successful. When entering the Stereo Mode, the primary speaker reads, “left Channel” and the secondary speaker reads, “Right Channel”.
Note : Stereo mode is only available when there are 2 Tribit Aqua Ease speakers. And make sure the firmware of both speakers have been upgraded to the latest version through the APP.
Reset
If malfunction occurs, you can try to reset the speaker ( press and hold the volume + button and volume – button at the same time for 5 seconds ) to remedy issues. Once reset, all the old data has been wiped, and you need to pair the speaker to your Bluetooth device anew.
Specifications
Bluetooth Version | V5.3 |
---|---|
Bluetooth Protocol | A2DP AVRCP HFP HSP |
Output Power | 5W |
Frequency Response | 100~16KHz |
Frequency Band | 2402-2480MHz |
Maximum Transmission Power | ≤6dBm |
Battery | .7V, 2200mAh, 8.14Wh |
Charging Time | 3 hours @ DC 5V/1A |
Waterproof Rating | IPX7 |
Size | 109.6 109.6 48.2mm |
Weight | 260g |
Customer Service
- An 12-month Warranty
- For more services and information, please Email to support@tribit.com
Safety Precautions
- Do not place the speaker in a place where it is easy to fall.
- IPX7 is tested under strictly controlled laboratory conditions. Water resistance may diminish over time under daily use. To prevent damage to the product from liquids, do not immerse the product in water.
- Do not disassemble, repair or modify this product by yourself.
- Keep the speaker away from extreme temperatures.
- Do not use the speaker in an outdoor thunderstorm environment.
- Do not use any corrosive cleaners or other chemical solutions to clean the speaker.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Hereby, Thousand shores Deutschland GmbH declares that the radio equipment The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/bts11-eu-doc.pdf
Learn more about the UK Declaration of Conformity, Please click below link to download. http://files.tribit.com/bts11-uk-doc.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>